ABSTRACT
Photothermoelectric (PTE) detectors functioning on the infrared spectrum show much potential for use in many fields, such as energy harvesting, nondestructive monitoring, and imaging fields. Recent advances in low-dimensional and semiconductor materials research have facilitated new opportunities for PTE detectors to be applied in material and structural design. However, these materials applied in PTE detectors face some challenges, such as unstable properties, high infrared reflection, and miniaturization issues. Herein, we report our fabrication of scalable bias-free PTE detectors based on Ti3C2 and poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) composites and characterization of their composite morphology and broadband photoresponse. We also discuss various PTE engineering strategies, including substrate choices, electrode types, deposition methods, and vacuum conditions. Furthermore, we simulate metamaterials using different materials and hole sizes and fabricated a gold metamaterial with a bottom-up configuration by simultaneously combining MXene and polymer, which achieved an infrared photoresponse enhancement. Finally, we demonstrate a fingertip gesture response using the metamaterial-integrated PTE detector. This research proposes numerous implications of MXene and its related composites for wearable devices and Internet of Things (IoT) applications, such as the continuous biomedical tracking of human health conditions.
ABSTRACT
Photothermoelectric (PTE) detectors that combine photothermal and thermoelectric conversion have emerged in recent years. They can overcome bandgap limitations and achieve effective infrared detection. However, the development of PTE detectors and the related system design are in the early phases. Herein, we present vertical PTE detectors utilizing the active layer of carbon nanotube forests with MXenes acting as top electrodes. The detector demonstrates its capacity for sensitive infrared detection and rapid infrared response. We also investigated the relationship between photoresponse and different MXene electrode types as well as their thickness, which guides the PTE detector configuration design. Furthermore, we packed the PTE detectors with a polytetrafluoroethylene (PTFE, Teflon) cavity. The photoresponse is improved and the degradation is significantly delayed. We also applied this PTE detector system for non-destructive tracking (NDT) applications, where the photovoltage mapping pattern proves the viability of the imaging track. This work paves the way toward infrared energy harvesters and customized industrial NDT measurement.
ABSTRACT
In this paper, we present two methods to improve the field emission (FE) performance of vertically aligned carbon nanotube emitters that are treated with dimethyl sulfoxide (DMSO) solution and poly(3,4-ethylene dioxythiophene):polystyrene sulfonate (PEDOT:PSS) solution, respectively, and compared their performances. Both treatments force CNTs to be bundled into clusters, but the formed structures are very different. After treatment, both methods reduced the threshold electric field due to the reduction in screening effects, whereas the PEDOT:PSS treatment significantly reduced the threshold field to far lower than that of DMSO treatment. In addition, the FE efficiency and lifetime of treated CNT emitters are significantly improved. For both treated emitters, there is only slight degradation of the emission current after 80 hours of continuous FE at around 50 µA. In addition, the uniformity of both treated CNT emitters is improved which enables more CNTs to contribute to the overall current emission. This, in turn, lowers the current emitted by individual CNTs, and thereby increases the lifetime of the emitters. Therefore, this study demonstrates that these simple treatment methods of bundling CNTs into unique cluster-structures significantly improve the lifetime of FE and make them excellent candidates for large currents and long-term FE.
