Corneal injury repair and the potential involvement of ZEB1.

The cornea, consisting of three cellular and two non-cellular layers, is the outermost part of the eyeball and frequently injured by external physical, chemical, and microbial insults. The epithelial-to-mesenchymal transition (EMT) plays a crucial role in the repair of corneal injuries. Zinc finger E-box binding homeobox 1 (ZEB1), an important transcription factor involved in EMT, is expressed in the corneal tissues. It regulates cell activities like migration, transformation, and proliferation, and thereby affects tissue inflammation, fibrosis, tumor metastasis, and necrosis by mediating various major signaling pathways, including transforming growth factor (TGF)-ß. Dysfunction of ZEB1 would impair corneal tissue repair leading to epithelial healing delay, interstitial fibrosis, neovascularization, and squamous cell metaplasia. Understanding the mechanism underlying ZEB1 regulation of corneal injury repair will help us to formulate a therapeutic approach to enhance corneal injury repair.

Serological Screening of TORCH Pathogen Infections in Infertile Women of Childbearing Age in Northwest China.

Serological screening for TORCH(Toxoplasma gondii [TOX], Rubella virus [RV], Cytomegalovirus [CMV], and Herpes simplex virus [HSV]) infections is an effective method for preventing congenital infections caused by TORCH pathogens.In this study, we retrospectively analyzed the characteristics of TORCH infections in 17,807 infertile women of childbearing age in northwest China.We conducted serological detection of TORCH-pathogen-specific IgM and IgG antibodies. The seroprevalence of TORCH infections was statistically analyzed by applying χ2 and Fisher exact-probability tests to evaluate the differences among ages and across quarters of the year. The overall IgM/IgG seroprevalences of TOX, RV, CMV, HSV-1, and HSV-2 were 0.46/3.4%, 0.77/84.93%, 0.68/97.54%, 1.2/82.83%, and 0.62/10.04%, respectively. The positive rates for RV-IgM in women ≥ 40 years old were significantly higher than those for women 25-39 (P < 0.05) years of age. The seroprevalence of HSV1-IgM was higher in the third and fourth quarters of the year (seasons) (P < 0.001), and the seroprevalence of CMV-IgG was statistically significant between differences quarters (P = 0.017), and the seroprevalence of CMV-IgG in the first quarter was lower than that in the third and fourth quarters (Bonferroni correction, P = 0.009 > 0.0083), suggesting no statistically significant difference between the latter two groups. This study showed that in northwestern China the risk of acquiring primary infection by a TORCH pathogen among infertile women of childbearing age were still high, especially Toxoplasma gondii and Herpesvirus type 2 infection. Therefore, effective prevention strategies that include serological screening for TORCH should be implemented.

Synergistic Effect of Betaines and Dialkyl Chain Anionic Surfactants on Interfacial Arrangement: A Molecular Dynamics Simulation Study.

Mixed systems of betaines and anionic surfactants can have a significant synergistic effect and greatly reduce the interfacial tension (IFT), which has attracted an extensive amount of attention. However, this synergistic effect requires an anionic surfactant and betaine molecular size matching, which limits the scope of its application. In this work, we studied three mixed systems of sodium dialkyl sulfosuccinate (AOT) and betaines with different sizes by molecular dynamics simulation and an IFT experiment and explored the interfacial behavior and synergistic mechanism of AOT in single and mixed systems. The hydrophobic tail chain center angle, average rising height of carbon atoms, stretch degree and distance between the terminal carbon atoms of AOT, and tilt angles of betaine were calculated and analyzed in detail. Simulation results showed that the hydrophobic tail chain center angle of AOT in the single system was smaller, and it tended to extend into the oil phase. After being mixed with different betaines, AOT can adjust its size according to the interfacial vacancies of different betaine systems by changing the alkyl chain orientation and forming tighter interfacial films. The IFT experiment showed that betaine/AOT mixed systems achieved a lower IFT value compared with that of the single system, indicating that AOT showed a synergistic effect with betaines with different structures. This study will be importantly instructively significant for the design and research of betaine mixed systems in crude oil exploitation.

A Room-Temperature Strategy to Synthesize Ce/Tb-Codoped NaYF4 Nanoparticles with a Photoluminescence Quantum Yield Exceeding 50.

NaYF4:Ce3+,Tb3+ down-conversion nanoparticles with a photoluminescence quantum yield (PLQY) of 54.8% are synthesized by using a ligand-assisted coprecipitation method in this study. The reaction is completed within 1 min at room temperature, and short-chain hexanoic acid and hexylamine serve as the binary ligands, which enable us to synthesize highly luminescent NaYF4:Ce3+,Tb3+ nanoparticles at room temperature. X-ray diffraction (XRD) and transmission electron microscopy (TEM) are used to characterize the as-prepared nanocrystals. The results reveal that the NaYF4:Ce3+,Tb3+ nanocrystals exhibit excellent dispersion and have a particle size of 2.7 nm. Our NaYF4:Ce3+,Tb3+ nanocrystals possess the advantages of room-temperature preparation, high PLQY, and ultrasmall particle size. These results reveal that the NaYF4:Ce3+,Tb3+ nanocrystals might have a high potential in the applications of lighting, display devices, and bioimaging.

TCAD Simulation Studies on Ultra-Low-Power Non-Volatile Memory.

Ultra-Low-Power Non-Volatile Memory (UltraRAM), as a promising storage device, has attracted wide research attention from the scientific community. Non-volatile data retention in combination with switching at ≤2.6 V is achieved through the use of the extraordinary 2.1 eV conduction band offsets of InAs/AlSb and a triple-barrier resonant tunnelling structure. Along these lines, in this work, the structure, storage mechanism, and improvement strategies of UltraRAM were systematically investigated to enhance storage window clarity and speed performance. First, the basic structure and working principle of UltraRAM were introduced, and its comparative advantages over traditional memory devices were highlighted. Furthermore, through the validation of the band structure and storage mechanism, the superior performance of UltraRAM, including its low operating voltage and excellent non-volatility, was further demonstrated. To address the issue of the small storage window, an improvement strategy was proposed by reducing the thickness of the channel layer to increase the storage window. The feasibility of this strategy was validated by performing a series of simulation-based experiments. From our analysis, a significant 80% increase in the storage window after thinning the channel layer was demonstrated, providing an important foundation for enhancing the performance of UltraRAM. Additionally, the data storage capability of this strategy was examined under the application of short pulse widths, and a data storage operation with a 10 ns pulse width was successfully achieved. In conclusion, valuable insights into the application of UltraRAM in the field of non-volatile storage were provided. Our work paves the way for further optimizing the memory performance and expanding the functionalities of UltraRAM.

Damage Model of Steel Fiber-Reinforced Coal Gangue Concrete under Freeze-Thaw Cycles Based on Weibull Distribution.

In order to improve the utilization rate of coal gangue and expand the application range of coal gangue concrete (CGC), a certain proportion of steel fiber was added to the concrete, and the freeze-thaw cycles (FTCs) and flexural tests were used to explore the effects of different mass replacement rates of coal gangue (0%, 25%, 50%, 75%, and 100%) and different proportions of the volumetric blending of the steel fiber (0%, 0.8%, 1.0%, and 1.2%) on the frost resistance of steel fiber-reinforced CGC (SCGC). The governing laws of mass loss rate, relative dynamic elastic modulus and load-midspan deflection curve were obtained on the base of the analysis of testing results. The damage mechanisms of the SCGC under the FTCs were analyzed using the results of scanning electron microscopy (SEM). Based on the Lemaitre's strain equivalence principle and Krajcinovic's vector damage theory, a damage evolution model of the SCGC under the FTCs was established by introducing the damage variable of the SCGC satisfying Weibull distribution. The results show an increasing mass loss rate of the SCGC and a decreasing relative dynamic elastic modulus with an increasing mass replacement rate of coal gangue. The proper content of the steel fiber can reduce the mass loss rate of concrete by 10~40% and the relative loss rate of dynamic elastic modulus of concrete by 2~8%, thus significantly improving the ductility and toughness of the concrete. The established damage evolution model is well validated by the experimental results, which further help to improve the modelling accuracy. This study provides key experimental data and a theoretical basis for a wider range of proper utilization of coal gangue in cold regions.

Low-temperature in situ preparation of Eu3+/Tb3+-doped CaMoO4/SrMoO4 nanoparticle thin films and their application in anti-counterfeiting.

Rare earth-doped metal oxide thin films exhibit remarkable potential for application in anti-counterfeiting, owing to their exceptional fluorescent properties. However, the existing fabrication techniques for these rare earth-doped luminescent thin films are predominantly complex and necessitate high-temperature conditions. In light of this issue, we present a low-temperature method for in situ fabrication of luminescent Ca1-xMoO4:Eux3+ and Sr1-xMoO4:Tbx3+ nanocrystal thin films by a solution deposition process. The developed method has the advantages of simple operation, rapid and low-temperature synthesis. The optimal chemical compositions of molybdate-based luminescent films are Ca0.90MoO4:Eu0.103+ and Sr0.90MoO4:Tb0.103+. Moreover, we evaluate the practical feasibility of luminescent nanoparticle films in the field of anti-counterfeiting by combining the unique fluorescent properties of rare earth ions and designing customized fluorescent patterns.

NiFe Nanoparticle-Encapsulated Ultrahigh-Oxygen-Doped Carbon Layers as Bifunctional Electrocatalysts for Rechargeable Zn-Air Batteries.

There is an urgent demand for developing highly efficient bifunctional electrocatalysts with excellent stability toward the oxygen evolution and reduction reactions (OER and ORR, respectively) for rechargeable Zn-air batteries (ZABs). In this work, NiFe nanoparticles encapsulated within ultrahigh-oxygen-doped carbon quantum dots (C-NiFe) as bifunctional electrocatalysts are successfully obtained. The accumulation of carbon layers formed by carbon quantum dots results in abundant pore structures and a large specific surface area, which is favorable for improving catalytic active site exposure, ensuring high electronic conductivity and stability simultaneously. The synergistic effect of NiFe nanoparticles enriched the number of active centers and naturally increased the inherent electrocatalytic performance. Benefiting from the above optimization, C-NiFe shows excellent electrochemical activity for both OER and ORR processes (the OER overpotential is only 291 mV to achieve 10 mA cm-2). Furthermore, the C-FeNi catalyst as an air cathode displays an impressive peak power density of 110 mW cm-2, an open-circuit voltage of 1.47 V, and long-term durability over 58 h. The preparation of this bifunctional electrocatalyst provides a design idea for the construction of bimetallic NiFe composites for high-performance Zn-air batteries.

An Ultrafast and Room-Temperature Strategy for Kilogram-Scale Synthesis of Sub-5 nm Eu3+ -doped CaMO4 Nanocrystals with a Photoluminescence Quantum Yield Exceeding 85.

Rare earth-doped metal oxide nanocrystals have a high potential in display, lighting, and bio-imaging, owing to their excellent emission efficiency, superior chemical, and thermal stability. However, the photoluminescence quantum yields (PLQYs) of rare earth-doped metal oxide nanocrystals have been reported to be much lower than those of the corresponding bulk phosphors, group II-VI, and halide-based perovskite quantum dots because of their poor crystallinity and high-concentration surface defects. Here, an ultrafast and room-temperature strategy for the kilogram-scale synthesis of sub-5 nm Eu3+ -doped CaMoO4 nanocrystals is presented, and this reaction can be finished in 1 min under ambient conditions. The absolute PLQYs for sub-5 nm Eu3+ -doped CaMoO4 nanocrystals can reach over 85%, which are comparable to those of the corresponding bulk phosphors prepared by the high-temperature solid state reaction. Moreover, the as-produced nanocrystals exhibit a superior thermal stability and their emission intensity unexpectedly increases after sintering at 600 °C for 2 h in air. 1.9 kg of Eu3+ -doped CaMoO4 nanocrystals with a PLQY of 85.1% can be obtained in single reaction.

Immobilization of tannin onto dialdehyde chitosan as a strategy for highly efficient and selective Au(III) adsorption.

Recycling of Au(III) from wastewater can not only increase resource utilization but also reduce environmental pollution. Herein, a chitosan-based bio-adsorbent (DCTS-TA) was successfully synthesized via crosslinking reaction between tannin (TA) and dialdehyde chitosan (DCTS) for the recovery of Au(III) from the solution. The maximum adsorption capacity for Au(III) was 1146.59 mg/g at pH 3.0, which fitted well with the Langmuir model. The XRD, XPS, and SEM-EDS analyses demonstrated that Au(III) adsorption on DCTS-TA was a collaborative process involving electrostatic interaction, chelation, and redox reaction. Existence of multiple coexisting metal ions did not significantly affect the Au(III) adsorption efficiency, with >90 % recovery of DCTS-TA obtained after five cycles. DCTS-TA is a promising candidate for Au(III) recovery from aqueous solutions due to its easy preparation, environmental-friendliness, and high efficiency.

Room-temperature and ultrafast Eu3+ ion doping for highly luminescent and extremely small CaMoO4 nanocrystals.

We developed a room-temperature and ultrafast Eu3+-ion doping approach for the synthesis of highly luminescent Eu-doped CaMoO4 nanoparticles. Firstly, CaMoO4 nanoparticles with a particle size of 3.9 nm are rapidly prepared using a room temperature co-precipitation approach. Subsequently, Eu-doped CaMoO4 nanoparticles with a photoluminescence quantum yield of up to 75% are synthesized by a post-cation exchange reaction at room temperature. This facile and room-temperature synthetic strategy enables us to prepare highly luminescent and extremely small rare earth ion-doped metal oxide nanocrystals.

Ionic Liquid-Assisted Ink for Inkjet-Printed Indium Tin Oxide Transparent and Conductive Thin Films.

Drop-on-demand inkjet printing is used to deposit indium tin oxide (ITO) transparent and conductive thin films. ITO printable ink is prepared by dissolving indium hydroxide and tin (IV) chloride into ethanol with the assistance of acetic acid/tert-butylamine ionic liquid. Ionic liquid-assisted ITO ink exhibits a complete wetting behavior on the glass substrate and a tunable viscosity, which makes it particularly suitable for the inkjet printing fabrication of ITO thin films. After annealing at 500 °C in forming gas, ITO thin films with a sheet resistance of 99 Ω/□, a resistivity of 2.28 × 10-3 Ω·cm, and a transmittance of 95.2% in the range of 400-1000 nm can be obtained. The effects of annealing temperature on the resistivity, mobility, carrier concentration, transmittance, and optical band gap are investigated systematically. Compared with commercial ITO thin films made by conventional vacuum-based deposition approaches, these printable ITO thin films have a higher material utilization.

Room-Temperature, Ultrafast, and Aqueous-Phase Synthesis of Ultrasmall LaPO4:Ce3+, Tb3+ Nanoparticles with a Photoluminescence Quantum Yield of 74.

LaPO4:Ce3+, Tb3+ nanoparticles with a particle size of 2.7 nm are prepared by a facile room-temperature ligand-assisted coprecipitation method in an aqueous solution. Short-chain butyric acid and butylamine are used as binary ligands and play a critically important role in the synthesis of highly luminescent LaPO4:Ce3+, Tb3+ nanoparticles. The absolute photoluminescence quantum yield as high as 74% can be achieved for extremely small LaPO4:Ce3+, Tb3+ nanoparticles with an optimal composition of La0.4PO4:Ce0.13+, Tb0.53+, which is different from La0.4PO4:Ce0.453+, Tb0.153+ for bulk phosphor. The energy transfer from Ce3+ ions to Tb3+ ions is investigated in sub-3 nm LaPO4:Ce3+, Tb3+ nanoparticles, and Ce3+ ion emission is almost completely suppressed. This room-temperature, ultrafast, and aqueous-phase synthetic strategy is particularly suitable for the large-scale preparation of highly luminescent LaPO4:Ce3+, Tb3+ nanoparticles. LaPO4:Ce3+, Tb3+ nanoparticles (110 g) can be synthesized in one batch, which is perfectly suited to the needs of industrial production.

Effects of Charge Trapping on Memory Characteristics for HfO2-Based Ferroelectric Field Effect Transistors.

A full understanding of the impact of charge trapping on the memory window (MW) of HfO2-based ferroelectric field effect transistors (FeFETs) will permit the design of program and erase protocols, which will guide the application of these devices and maximize their useful life. The effects of charge trapping have been studied by changing the parameters of the applied program and erase pulses in a test sequence. With increasing the pulse amplitude and pulse width, the MW increases first and then decreases, a result attributed to the competition between charge trapping (CT) and ferroelectric switching (FS). This interaction between CT and FS is analyzed in detail using a single-pulse technique. In addition, the experimental data show that the conductance modulation characteristics are affected by the CT in the analog synaptic behavior of the FeFET. Finally, a theoretical investigation is performed in Sentaurus TCAD, providing a plausible explanation of the CT effect on the memory characteristics of the FeFET. This work is helpful to the study of the endurance fatigue process caused by the CT effect and to optimizing the analog synaptic behavior of the FeFET.

Plasmon-Exciton Coupling Effect in Nanostructured Arrays for Optical Signal Amplification and SARS-CoV-2 DNA Sensing.

A surface plasmon resonance (SPR)-enhanced optical signal using a nanoslit array and acridine orange (AO) dye system at a flexible poly(dimethylsiloxane) (PDMS) substrate was achieved in this work and demonstrated a simple sensing scheme to directly detect SARS-CoV-2 nucleic acid via DNA hybridization. A simple nanoimprinting pattern transfer technique was introduced to form uniform reproducible nanoslit arrays where the dimensions of the slit array were controlled by the thickness of the gold film. The plasmon-exciton coupling effect on the optical enhancement of different dye molecules, i.e., AO, propidium iodide (PI), or dihydroethidium (DHE) attached to the nanoslit surfaces, was examined thoroughly by measuring the surface reflection and fluorescence imaging. The results indicate that the best overlap of the plasmon resonance wavelength to the excitation spectrum of AO presented the largest optical enhancement (∼57×) compared to the signal at flat gold surfaces. Based on this finding, a sensitive assay for detecting DNA hybridization was generated using the interaction of the selected SARS-CoV-2 ssDNA and dsDNA with AO to trigger the metachromatic behavior of the dye at the nanoarray surfaces. We found strong optical signal amplification on the formation of acridine-ssDNA complexes and a quenched signal upon hybridization to the complementary target DNA (ct-DNA) along with a blue shift in the fluorescence of AO-dsDNAs. A quantitative evaluation of the ct-DNA concentration in a range of 100-0.08 nM using both the reflection and emission imaging signals demonstrated two linear regimes with a lowest detection limit of 0.21 nM. The sensing method showed high sensitivity and distinguished signals from 1-, 2-, and 3-base mismatched DNA targets, as well as high stability and reusability. This approach toward enhancing optical signal for DNA sensing offers promise in a general, rapid, and direct vision detection method for nucleic acid analytes.

N-Myristoyltransferase, a Potential Antifungal Candidate Drug-Target for Aspergillus flavus.

The filamentous fungus Aspergillus flavus causes devastating diseases not only to cash crops but also to humans by secreting a series of secondary metabolites called aflatoxins. In the cotranslational or posttranslational process, N-myristoyltransferase (Nmt) is a crucial enzyme that catalyzes the myristate group from myristoyl-coenzyme A (myristoyl-CoA) to the N terminus or internal glycine residue of a protein by forming a covalent bond. Members of the Nmt family execute a diverse range of biological functions across a broad range of fungi. However, the underlying mechanism of AflNmt action in the A. flavus life cycle is unclear, particularly during the growth, development, and secondary metabolic synthesis stages. In the present study, AlfNmt was found to be essential for the development of spore and sclerotia, based on the regulation of the xylose-inducible promoter. AflNmt, located in the cytoplasm of A. flavus, is also involved in modulating aflatoxin (AFB1) in A. flavus, which has not previously been reported in Aspergillus spp. In addition, we purified, characterized, and crystallized the recombinant AflNmt protein (rAflNmt) from the Escherichia coli expression system. Interestingly, the crystal structure of rAlfNmt is moderately different from the models predicted by AlphaFold2 in the N-terminal region, indicating the limitations of machine-learning prediction. In conclusion, these results provide a molecular basis for the functional role of AflNmt in A. flavus and structural insights concerning protein prediction. IMPORTANCE As an opportunistic pathogen, A. flavus causes crop loss due to fungal growth and mycotoxin contamination. Investigating the role of virulence factors during infection and searching for novel drug targets have been popular scientific topics in the field of fungal control. Nmt has become a potential target in some organisms. However, whether Nmt is involved in the developmental stages of A. flavus and aflatoxin synthesis, and whether AlfNmt is an ideal target for structure-based drug design, remains unclear. This study systematically explored and identified the role of AlfNmt in the development of spore and sclerotia, especially in aflatoxin biosynthesis. Moreover, although there is not much difference between the AflNmt model predicted using the AlphaFold2 technique and the structure determined using the X-ray method, current AI prediction models may not be suitable for structure-based drug development. There is still room for further improvements in protein prediction.

Prevalence of Human Papillomavirus Infection in the Female Partner of Infertile Couples Undergoing IVF/ICSI-ET and Subsequent Reproductive Outcomes.

We investigated the prevalence of human papillomavirus (HPV) infection in the female partner of infertile couples and the reproductive outcomes after in vitro fertilization/intracytoplasmic sperm injection-embryo transfer (IVF/ICSI-ET). We conducted a retrospective analysis on 8117 women from infertile couples who underwent IVF/ICSI treatment and evaluated the prevalence of HPV infection in these women. The prevalence of HPV infection in the female partner of infertile couples was 9.2% (747/8117). These HPV-infected female patients undergoing ART were divided into high-risk HPV (hrHPV) (n = 130) and low-risk HPV (lrHPV) groups (n = 94), and non-infected women patients formed the negative group (n = 126). Of the 747 cases infected with HPV, 529 showed hrHPV infection (70.82%; primarily genotypes 16, 52, 53, 58, and 59); 175 exhibited lrHPV infection (23.43%; primarily genotypes 6, 43, 44, 55, 61, and 81); and 43 cases were co-infected with hrHPV and lrHPV (5.76%). Except for the Day-3 high-quality embryo rate, there were no differences in ovum maturation, fertilization, implantation, clinical pregnancy, live birth, or miscarriage rates between women infected with HPV and non-infected women (p > 0.05); however, we noted an increased miscarriage rate after logistic regression analyses (OR, 0.16; 95% CI, 0.03−0.84; p = 0.041). For single-male-factor-induced infertility in couples (smHPV), although we likewise observed no differences in ovum maturation, fertilization, or implantation rates (p > 0.05) between the smHPV group and the negative group, we discerned diminutions in the Day-3 high-quality embryo rate (46.01% vs. 70.04%, p = 0.013), clinical pregnancy rate (46.67% vs. 57.94%, p = 0.003), and live birth rate (33.33% vs. 46.83%, p = 0.027) as well as an augmented miscarriage rate (11.11% vs. 4.76%, p = 0.003), respectively. Logistic regression analyses indicated that smHPV was a risk factor for decreased clinical pregnancy rate (OR, 4.17; 95% CI, 2.31−7.53; p < 0.001) and live birth rate (OR, 1.83; 95% CI, 0.81−2.14; p = 0.045) and elevated miscarriage rate (OR, 6.83; 95% CI, 2.22−21.00; p = 0.001). HPV infection in women was associated with increased miscarriage rate, and single-male-factor infertility influenced reproductive outcomes in couples undergoing IVF/ICSI treatment. Both were potentially due to HPV infection in the couple.

Mechanism of Random Telegraph Noise in 22-nm FDSOI-Based MOSFET at Cryogenic Temperatures.

In the emerging process-based transistors, random telegraph noise (RTN) has become a critical reliability problem. However, the conventional method to analyze RTN properties may not be suitable for the advanced silicon-on-insulator (SOI)-based transistors, such as the fully depleted SOI (FDSOI)-based transistors. In this paper, the mechanism of RTN in a 22-nm FDSOI-based metal-oxide-semiconductor field-effect transistor (MOSFET) is discussed, and an improved approach to analyzing the relationship between the RTN time constants, the trap energy, and the trap depth of the device at cryogenic temperatures is proposed. The cryogenic measurements of RTN in a 22-nm FDSOI-based MOSFET were carried out and analyzed using the improved approach. In this approach, the quantum mechanical effects and diffuse scattering of electrons at the oxide-silicon interface are considered, and the slope of the trap potential determined by the gate voltage relation is assumed to decrease proportionally with temperature as a result of the electron distribution inside the top silicon, per the technology computer-aided design (TCAD) simulations. The fitted results of the improved approach have good consistency with the measured curves at cryogenic temperatures from 10 K to 100 K. The fitted trap depth was 0.13 nm, and the decrease in the fitted correction coefficient of the electron distribution proportionally with temperature is consistent with the aforementioned assumption.

Improved Ferroelectric Properties in Hf0.5Zr0.5O2 Thin Films by Microwave Annealing.

In the doped hafnia(HfO2)-based films, crystallization annealing is indispensable in forming ferroelectric phases. In this paper, we investigate the annealing effects of TiN/Hf0.5Zr0.5O2/TiN metal-ferroelectric-metal (MFM) capacitors by comparing microwave annealing (MWA) and rapid thermal annealing (RTA) at the same wafer temperature of 500 °C. The twofold remanent polarization (2Pr) of the MWA device is 63 µC/cm2, surpassing that of the RTA device (40 µC/cm2). Furthermore, the wake-up effect is substantially inhibited in the MWA device. The orthorhombic crystalline phase is observed in the annealed HZO films in the MWA and RTA devices, with a reduced TiN and HZO interdiffusion in MWA devices. Moreover, the MFM capacitors subjected to MWA treatment exhibit a lower leakage current, indicating a decreased defect density. This investigation shows the potential of MWA for application in ferroelectric technology due to the improvement in remanent polarization, wake-up effect, and leakage current.

The regulatory role of the Aspergillus flavus core retromer complex in aflatoxin metabolism.

Aflatoxins are a series of highly toxic and carcinogenic secondary metabolites that are synthesized by Aspergillus species. The degradation of aflatoxin enzymes is an important regulatory mechanism which modulates mycotoxin producing. The retromer complex is responsible for the retrograde transport of specific biomolecules and the vacuolar fusion in the intracellular transport. Late endosomal-associated GTPase (Rab7) has been shown to be a downstream effector protein of the retromer complex. A deficiency in the retromer complex or Rab7 results in several cellular trafficking problems in yeast and humans, like protein abnormal accumulation. However, whether retromer dysfunction is involved in aflatoxin synthesis remains unclear. Here, we report that the core retromer complex, which comprises three vacuolar protein sorting-associated proteins (AflVps26-AflVps29-AflVps35), is essential for the development of dormant and resistant fungal forms such as conidia (asexual reproductive spore) and sclerotia (hardened fungal mycelium), as well as aflatoxin production and pathogenicity, in Aspergillus flavus. In particular, we show the AflVps26-AflVps29-AflVps35 complex is negatively correlated with aflatoxin exportation. Structural simulation, site-specific mutagenesis, and coimmunoprecipitation experiments showed that interactions among AflVps26, AflVps29, and AflVps35 played crucial roles in the retromer complex executing its core functions. We further found an intrinsic connection between AflRab7 and the retromer involved in vesicle-vacuole fusion, which in turn affected the accumulation of aflatoxin synthesis-associated enzymes, suggesting that they work together to regulate the production of toxins. Overall, these results provide mechanistic insights that contribute to our understanding of the regulatory role of the core retromer complex in aflatoxin metabolism.