ABSTRACT
A novel high-sensitivity temperature sensor based on a chirped thin-core fiber Bragg grating Fabry-Perot interferometer (CTFBG-FPI) and the Vernier effect is proposed and demonstrated. With femtosecond laser direct writing technology, two CTFBG-FPIs with different interferometric cavity lengths are inscribed inside a thin-core fiber to form a Vernier effect system. The two FPIs consist of two pairs of CTFBGs with a full width at half maximum (FWHM) of 66.5â nm staggered in parallel. The interferometric cavity lengths of the two FPIs were designed to be 2 mm and 1.98 mm as the reference arm and sensing arm of the sensor, respectively. The temperature sensitivity of this sensor was measured to be -1.084â nm/°C in a range of 40-90°C. This sensor is expected to play a crucial role in precision temperature measurement applications.
ABSTRACT
This Letter reports a novel helical sapphire fiber Bragg grating (HSFBG) in a single crystal sapphire fiber with diameter of 60 µm fabricated by a 515 nm femtosecond laser. Due to the large refractive index modulation region and high structural symmetry of the HSFBGs, high-reflectivity and high-quality spectra can be prepared and additionally have good bending resistance. The spectral properties of HSFBGs with different helical diameters are studied. When the helical diameter is 30 µm, the reflectivity of HSFBG is 40%, the full width at half-maximum is 1.56 nm, and the signal-to-noise ratio is 16 dB. For the HSFBG bending test, the minimum bending radius is 5 mm, which can still maintain relatively good spectral quality. In addition, the HSFBG array with different periods has been successfully cascaded in a sapphire fiber. The experimental results of the HSFBG high-temperature test show that this HSFBG can work reliably at 1600°C, and the temperature sensitivity in the high-temperature range can reach 35.55 pm/°C. This HSFBG can be used in high-temperature and harsh environments, such as metal smelting and aeroengine structural health monitoring.
ABSTRACT
In this work, a method is proposed and demonstrated for fabrication of chirped fiber Bragg gratings (CFBGs) in single-mode fiber by femtosecond laser point-by-point inscription. CFBGs with bandwidths from 2 to 12 nm and dispersion ranges from 14.2 to 85 ps/nm are designed and achieved. The sensitivities of temperature and strain are 14.91 pm/°C and 1.21pm/µÎµ, respectively. Compared to the present phase mask method, femtosecond laser point-by-point inscription technology has the advantage of manufacturing CFBGs with different parameter flexibilities, and is expected to be widely applied in the future.
