Biochemical and Transcriptome Analyses Reveal a Stronger Capacity for Photosynthate Accumulation in Low-Tillering Rice Varieties.

Moderate control of rice tillering and the development of rice varieties with large panicles are important topics for future high-yield rice breeding. Herein, we found that low-tillering rice varieties stopped tillering earlier and had a larger leaf area of the sixth leaf. Notably, at 28 days after sowing, the rice seedlings of the low-tillering group had an average single-culm above-ground biomass of 0.84 g, significantly higher than that of the multi-tillering group by 56.26%, and their NSC (non-structural carbohydrate) and starch contents in sheaths were increased by 43.34% and 97.75%, respectively. These results indicated that the low-tillering group of rice varieties had a stronger ability to store photosynthetic products in the form of starch in their sheaths, which was thus more beneficial for their large panicle development. The results of carbon and nitrogen metabolism analyses showed that the low-tillering group had a relatively strong carbon metabolism activity, which was more favorable for the accumulation of photosynthesis products and the following development of large panicles, while the multi-tillering group showed relatively strong nitrogen metabolism activity, which was more beneficial for the development and formation of new organs, such as tillers. Accordingly, in the low-tillering rice varieties, the up-regulated genes were enriched in the pathways mainly related to the synthesis of carbohydrates, while the down-regulated genes were mainly enriched in the nitrogen metabolism pathways. This study provides new insights into the mechanism of rice tillering regulation and promotes the development of new varieties with ideal plant types.

Role of Inorganic Amorphous Constituents in Highly Mineralized Biomaterials and Their Imitations.

A highly mineralized biomaterial is one kind of biomaterial that usually possesses a high content of crystal minerals and hierarchical microstructure, exhibiting excellent mechanical properties to support the living body. Recent studies have revealed the presence of inorganic amorphous constituents (IAC) either during the biomineralization process or in some mature bodies, which heavily affects the formation and performance of highly mineralized biomaterials. These results are surprising given the preceding intensive research into the microstructure design of these materials. Herein, we highlight the role of IAC in highly mineralized biomaterials. We focused on summarizing works demonstrating the presence or phase transformation of IAC and discussed in detail how IAC affects the formation and performance of highly mineralized biomaterials. Furthermore, we described some imitations of highly mineralized biomaterials that use IAC as the synthetic precursor or final strengthening phase. Finally, we briefly summarized the role of IAC in biomaterials and provided an outlook on the challenges and opportunities for future IAC and IAC-containing bioinspired materials researches.

An in situ grown amorphous ZrO2 layer on zeolite for enhanced phosphate adsorption.

Zeolite supported amorphous metal oxide nanolayers with high specific surface area, abundant adsorption sites, and excellent reusability hold a bright prospect in the efficient removal of contaminants, yet it is proven to be still challenging to precisely regulate and control their synthesis. Herein, we reported a facile synthetic strategy for rational design and achieving the uniform and firm in situ growth of an amorphous ZrO2 layer decorated on the surface of zeolite (ZEO@AZ) for enhanced phosphate adsorption. The Langmuir isotherm model and pseudo-second order kinetic equation well described the adsorption process towards phosphate solution, and the synthetized ZEO@AZ exhibited an excellent maximum adsorption amount of 24.98 mgP g-1. Furthermore, the adsorption of phosphates on ZEO@AZ was confirmed to be chemisorption, endothermic and spontaneous. This approach for fabricating amorphous metal oxide nanolayers on a robust matrix may provide a new route for constructing composites with superb phosphate adsorption performance.

Multiscale engineered artificial tooth enamel.

Tooth enamel, renowned for its high stiffness, hardness, and viscoelasticity, is an ideal model for designing biomimetic materials, but accurate replication of complex hierarchical organization of high-performance biomaterials in scalable abiological composites is challenging. We engineered an enamel analog with the essential hierarchical structure at multiple scales through assembly of amorphous intergranular phase (AIP)-coated hydroxyapatite nanowires intertwined with polyvinyl alcohol. The nanocomposite simultaneously exhibited high stiffness, hardness, strength, viscoelasticity, and toughness, exceeding the properties of enamel and previously manufactured bulk enamel-inspired materials. The presence of AIP, polymer confinement, and strong interfacial adhesion are all needed for high mechanical performance. This multiscale design is suitable for scalable production of high-performance materials.

ipa1 improves rice drought tolerance at seedling stage mainly through activating abscisic acid pathway.

KEY MESSAGE: ipa1 enhances rice drought tolerance mainly through activating the ABA pathway. It endows rice seedlings with a more developed root system, smaller leaf stomata aperture, and enhanced carbon metabolism. Drought is a major abiotic stress to crop production. IPA1 (IDEAL PLANT ARCHITECTURE 1)/OsSPL14 encodes a transcription factor and has been reported to function in both rice ideal plant architecture and biotic resistance. Here, with a pair of IPA1 and ipa1-NILs (Near Iso-genic Lines), we found that ipa1 could significantly improve rice drought tolerance at seedling stage. The ipa1 plants had a better-developed root system and smaller leaf stomatal aperture. Analysis of carbon-nitrogen metabolism-associated enzyme activity, gene expression, and metabolic profile indicated that ipa1 could tip the carbon-nitrogen metabolism balance towards an increased carbon metabolism pattern. In both the control and PEG-treated conditions, ABA content in the ipa1 seedlings was significantly higher than that in the IPA1 seedlings. Expression of the ABA biosynthesis genes was detected to be up-regulated, whereas the expression of ABA catabolism genes was down-regulated in the ipa1 seedlings. In addition, based on yeast one-hybrid assay and dual-luciferase assay, IPA1 was found to directly activate the promoter activity of OsHOX12, a transcription factor promoting ABA biosynthesis, and OsNAC52, a positive regulator of the ABA pathway. The expression of OsHOX12 and OsNAC52 was significantly up-regulated in the ipa1 plants. Combined with the previous studies, our results suggested that ipa1 could improve rice seedling drought tolerance mainly through activating the ABA pathway and that regulation of the ipa1-mediated ABA pathway will be an important strategy for improving drought resistance of rice.

Analysis of natural variation of the rice blast resistance gene Pike and identification of a novel allele Pikg.

Plant major resistance (R) genes are effective in detecting pathogen signal molecules and triggering robust defense responses. Investigating the natural variation in R genes will allow identification of the critical amino acid residues determining recognition specificity in R protein and the discovery of novel R alleles. The rice blast resistance gene Pike, comprising of two adjacent CC-NBS-LRR genes, namely, Pike-1 and Pike-2, confers broad-spectrum resistance to Magnaporthe oryzae. Here, we demonstrated that Pike-1 determined Pike-specific resistance through direct interaction with the pathogen signal molecule AvrPik. Analysis of natural variation in 79 Pike-1 variants in the Asian cultivated rice Oryza sativa and its wild relatives revealed that the CC and NBS regions, particularly the CC region of the Pike-1 protein were the most diversified. We also found that balancing selection had occurred in O. sativa and O. rufipogon to maintain the genetic diversity of the Pike-1 alleles. By analysis of amino acid sequences, we identified 40 Pike-1 variants in these rice germplasms. These variants were divided into three major groups that corresponded to their respective clades. A new Pike allele, designated Pikg, that differed from Pike by a single amino acid substitution (D229E) in the Pike-1 CC region of the Pike protein was identified from wild rice relatives. Pathogen assays of Pikg transgenic plants revealed a unique reaction pattern that was different from that of the previously identified Pike alleles, namely, Pik, Pikh, Pikm, Pikp, Piks and Pi1. These findings suggest that minor amino acid residues in Pike-1/Pikg-1 determine pathogen recognition specificity and plant resistance. As a new blast R gene derived from rice wild relatives, Pikg has potential applications in rice breeding.

Enamel Repair with Amorphous Ceramics.

Developing high-performance materials in physiological conditions to clinically repair stiff tissue for long lifespan remains a great challenge. Here, an enamel repair strategy is reported by efficiently growing a biocompatible ZrO2 ceramic layer on defective enamel through controllable hydrolysis of Zr4+ in oral-tolerable conditions. Detailed analysis of the grown layer indicates that the grown ZrO2 ceramic is amorphous without grain boundary and dislocation, which endows the repaired enamel with natural enamel comparable mechanical performance (modulus ≈82.5 GPa and hardness ≈5.2 GPa). Besides, the strong chemical connection between unsaturated coordinated Zr4+ in amorphous structure and PO4 3- greatly strengthen the crystalline-amorphous interface of the repaired enamel to endure the long-time mastication damage. Moreover, these ZrO2 ceramics provide hydrophilic, electronegative, and smooth surfaces to resist the adhesion and proliferation of cariogenic bacteria. The hybrid amorphous-crystalline interface design with advantages in biomechanical compatibility would promote the evolution of a variety of cutting-edge functional materials for medical and engineering application.

Synthesis of {111} Facet-Exposed MgO with Surface Oxygen Vacancies for Reactive Oxygen Species Generation in the Dark.

Seeking a simple and moderate route to generate reactive oxygen species (ROS) for antibiosis is of great interest and challenge. This work demonstrates that molecule transition and electron rearrangement processes can directly occur only through chemisorption interaction between the adsorbed O2 and high-energy {111} facet-exposed MgO with abundant surface oxygen vacancies (SOVs), hence producing singlet oxygen and superoxide anion radicals without light irradiation. These ROS were confirmed by electron paramagnetic resonance, in situ Raman, and scavenger experiments. Furthermore, heat plays a crucial role for the electron transfer process to accelerate the formation of ·O2-, which is verified by temperature kinetic experiments of nitro blue tetrazolium reduction in the dark. Therefore, the presence of oxygen vacancy can be considered as an intensification of the activation process. The designed MgO is acquired in one step via constructing a reduction atmosphere during the combustion reaction process, which has an ability similar to that of noble metal Pd to activate molecular oxygen and can be used as an effective bacteriocide in the dark.

Structure Modification Function of g-C3 N4 for Al2 O3 in the In Situ Hydrothermal Process for Enhanced Photocatalytic Activity.

Heterojunctions of g-C3 N4 /Al2 O3 (g-C3 N4 =graphitic carbon nitride) are constructed by an in situ one-pot hydrothermal route based on the development of photoactive γ-Al2 O3 semiconductor with a mesoporous structure and a high surface area (188 m(2) g(-1) ) acting as electron acceptor. A structure modification function of g-C3 N4 for Al2 O3 in the hydrothermal process is found, which can be attributed to the coordination between unoccupied orbitals of the Al ions and lone-pair electrons of the N atoms. The as-synthesized heterojunctions exhibit much higher photocatalytic activity than pure g-C3 N4 . The hydrogen generation rate and the reaction rate constant for the degradation of methyl orange over 50 % g-C3 N4 /Al2 O3 under visible-light irradiation (λ>420 nm) are 2.5 and 7.3 times, respectively, higher than those over pristine g-C3 N4 . The enhanced activity of the heterojunctions is attributed to their large specific surface areas, their close contact, and the high interfacial areas between the components as well as their excellent adsorption performance, and efficient charge transfer ability.