Calcium Doped NASICON Electrolyte with Graphite Coating for Stable All-solid-state Sodium Metal Batteries.

All-solid-state sodium metal batteries face the challenges of low ionic conductivity of solid electrolytes and poor wettability towards metallic Na anode. Herein, Na3Zr2Si2PO12 solid electrolyte is doped with Ca2+, obtaining a high ionic conductivity of 2.09×10-3 S cm-1 with low electronic conductivity of 1.43×10-8 S cm-1 at room temperature, which could accelerate Na+ transportation and suppress sodium dendrite growth. Meanwhile, a graphite-based interface layer is coated on Na3.4Zr1.8Ca0.2Si2PO12 (Na3.4Zr1.8Ca0.2Si2PO12-G) in order to improve the solid-solid contact between solid electrolyte and Na anode, realizing a uniform current distribution and smooth Na metal plating/stripping, and thus achieving a triple higher critical current density of 3.5 mA cm-2 compared with that of Na3.4Zr1.8Ca0.2Si2PO12. In addition, the assembled Na3V2(PO4)3/Na3.4Zr1.8Ca0.2Si2PO12-G/Na all-solid-state battery exhibits excellent electrochemical performances with a reversible capacity of 81.47 mAh g-1 at 1 C and capacity retention of 97.75 % after 500 cycles.

NaF-Rich Multifunctional Layers toward Stable All-Solid-State Sodium Batteries.

NASICON oxide solid electrolytes are considered promising candidates for all-solid-state sodium batteries due to their extremely high ionic conductivity and favorable electrochemical stability. However, the practical application of NASICON electrolytes is greatly impeded by poor electrolyte-electrode interfacial contact and continuous sodium dendrite propagation. Herein, a NaF-rich multifunctional interface layer on the surface of a Na anode (Na@NaF-rich), containing NaF, amorphous carbon, and an unreacted C-F bond species, is developed in situ by the reaction between Na and commercial poly(tetrafluoroethylene). This NaF-rich interface layer is proven to reduce the diffusion barriers at the Na/NASICON electrolyte interface and homogenize Na deposition as well as suppress Na dendrite growth, thus achieving a high critical current density of 4 mA cm-2. The resultant Na3V2(PO4)3@C/Na@NaF-rich all-solid-state cell showed a high initial specific capacity of 117.6 mAh g-1 at 0.1 C with a Coulombic efficiency of 94.8%. Even at 0.5 and 1 C, it still exhibited high capacity retentions of 83.3% and 80.4%, respectively, after 750 cycles.