Precise Modulation of Carbon Activity Sites in Metal-Free Covalent Organic Frameworks for Enhanced Oxygen Reduction Electrocatalysis.

Metal-free carbon-based materials have gained recognition as potential electrocatalysts for the oxygen reduction reaction (ORR) in new environmentally-friendly electrochemical energy conversion technologies. The presence of effective active centers is crucial for achieving productive ORR. In this study, we present the synthesis of two metal-free dibenzo[a,c]phenazine-based covalent organic frameworks (DBP-COFs), specifically JUC-650 and JUC-651, which serve as ORR electrocatalysts. Among them, JUC-650 demonstrates exceptional catalytic performance for ORR in alkaline electrolytes, exhibiting an onset potential of 0.90 V versus RHE and a half-wave potential of 0.72 V versus RHE. Consequently, JUC-650 stands out as one of the most outstanding metal-free COF-based ORR electrocatalysts report to date. Experimental investigations and density functional theory calculations confirm that modulation of the frameworks' electronic configuration allows for the reduction of adsorption energy at the Schiff-base carbon active sites, leading to more efficient ORR processes. Moreover, the DBP-COFs can be assembled as excellent air cathode catalysts for zinc-air batteries (ZAB), rivaling the performance of commercial Pt/C. This study provides valuable insights for the development of efficient metal-free organoelectrocatalysts through precise regulation of active site strategies.

Piezochromism in Dynamic Three-Dimensional Covalent Organic Frameworks.

Piezochromic materials with pressure-dependent photoluminescence tuning properties are important in many fields, such as mechanical sensors, security papers, and storage devices. Covalent organic frameworks (COFs), as an emerging class of crystalline porous materials (CPMs) with structural dynamics and tunable photophysical properties, are suitable for designing piezochromic materials, but there are few related studies. Herein, we report two dynamic three-dimensional COFs based on aggregation-induced emission (AIE) or aggregation-caused quenching (ACQ) chromophores, termed JUC-635 and JUC-636 (JUC=Jilin University China), and for the first time, study their piezochromic behavior by diamond anvil cell technique. Due to the various luminescent groups, JUC-635 has completely different solvatochromism and molecular aggregation behavior in the solvents. More importantly, JUC-635 with AIE effect exhibits a sustained fluorescence upon pressure increase (≈3 GPa), and reversible sensitivity with high-contrast emission differences (Δλem =187 nm) up to 12 GPa, superior to other CPMs reported so far. Therefore, this study will open a new gate to expand the potential applications of COFs as exceptional piezochromic materials in pressure sensing, barcoding, and signal switching.

Topological Isomerism in Three-Dimensional Covalent Organic Frameworks.

Although isomerism is a typical and significant phenomenon in organic chemistry, it is rarely found in covalent organic framework (COF) materials. Herein, for the first time, we report a controllable synthesis of topological isomers in three-dimensional COFs via a distinctive tetrahedral building unit under different solvents. Based on this strategy, both isomers with a dia or qtz net (termed JUC-620 and JUC-621) have been obtained, and their structures are determined by combining powder X-ray diffraction and transmission electron microscopy. Remarkably, these architectures show a distinct difference in their porous features; for example, JUC-621 with a qtz net exhibits permanent mesopores (up to ∼23 Å) and high surface area (∼2060 m2 g-1), which far surpasses those of JUC-620 with a dia net (pore size of ∼12 Å and surface area of 980 m2 g-1). Furthermore, mesoporous JUC-621 can remove dye molecules efficiently and achieves excellent iodine adsorption (up to 6.7 g g-1), which is 2.3 times that of microporous JUC-620 (∼2.9 g g-1). This work thus provides a new way for constructing COF isomers and promotes structural diversity and promising applications of COF materials.

Comparing the predictive ability of portoatrial and portocaval gradient after transjugular intrahepatic portosystemic shunt creation for variceal rebleeding.

BACKGROUND: Measuring the portal pressure gradient from the portal vein (PV) to the inferior vena cava (IVC) or to the right atrium (RA) remains controversial. The aim of our study was to compare the predictive ability of portoatrial gradient (PAG) and portocaval gradient (PCG) for variceal rebleeding. METHODS: The data of 285 cirrhotic patients with variceal bleeding undergoing elective transjugular intrahepatic portosystemic shunt (TIPS) in our hospital were analyzed retrospectively. The variceal rebleeding rates were compared between groups categorized by established or modified thresholds. The median follow-up time was 30.0 months. RESULTS: After TIPS, PAG was equal to (n = 115) or more than (n = 170) PCG. The pressure of IVC was defined as an independent predictor for a PAG-PCG difference of ≥ 2 mmHg (p < 0.001, OR 1.23, 95% CI 1.10-1.37). Using a threshold of 12 mmHg, PAG (p = 0.081, HR 0.63, 95% CI 0.37-1.06) could not predict variceal rebleeding but PCG could (p = 0.003, HR 0.45, 95% CI 0.26-0.77). This pattern was unchanged when a ≥ 50% reduction from baseline was also considered as a threshold (PAG/PCG: p = 0.114 and 0.001). Subgroup analyses showed that only in patients with post-TIPS IVC pressure < 9 mmHg (p = 0.018), PAG could predict variceal rebleeding. Because PAG was on average 1.4 mmHg higher than PCG, patients were classified by a PAG of 14 mmHg, and there was no difference in rebleeding rates between these two groups (p = 0.574). CONCLUSIONS: For patients with variceal bleeding, the predictive ability of PAG is limited. The portal pressure gradient should be measured between the PV and IVC.

The mechanisms of aluminum-induced immunotoxicity in chicks.

Aluminum (Al) is a ubiquitous environmental pollutant representing a significant global health hazard to human and animal health, including chicks. Al toxicity causes oxidative stress, leading to tissue injury, and consequently causes various diseases. NRF2 signaling is vital for protecting cells against oxidative stress. Nuclear xenobiotic receptors are activated by exogenous toxins, thereby inducing the transcription of cytochrome P450 enzyme systems (CYP450s) isoforms involved in xenobiotic metabolism and transport. However, little is known about Al-induced oxidative stress, nuclear xenobiotic receptors and fibrosis in chicks and the mechanisms involved. In this study, male chicks were treated with 0 mg/kg and 500 mg/kg Al2(SO4)3 to evaluate the mechanisms for Al-induced immunotoxicity. Histopathology revealed pathological injury, fibrin aggregation, disruption of the Nuclear Xenobiotic Receptors, and alteration of CYP450s homeostasis in Al-treated chicks due to oxidative stress. Notably, regulation of the NRF2 pathway and CYP450s and fibrosis-related genes was found to play a vital role in inhibiting immunotoxicity. This study provides new insights regarding the mechanisms of Al-induced immunotoxicity, including activation of the nuclear xenobiotic receptors, triggering oxidative stress, and altering the homeostasis of CYP450s in chicks. Further, it provides a theoretical basis for controlling Al exposure and highlights the importance of further studying its mechanisms to provide additional information for formulating preventive measures.

Three-dimensional microporous and mesoporous covalent organic frameworks based on cubic building units.

Covalent organic frameworks (COFs) have attracted extensive interest due to their unique structures and various applications. However, structural diversities are still limited, which greatly restricts the development of COF materials. Herein, we report two unusual cubic (8-connected) building units and their derived 3D imine-linked COFs with bcu nets, JUC-588 and JUC-589. Owing to these unique building blocks with different sizes, the obtained COFs can be tuned to be microporous or mesoporous structures with high surface areas (2728 m2 g-1 for JUC-588 and 2482 m2 g-1 for JUC-589) and promising thermal and chemical stabilities. Furthermore, the high selectivity of CO2/N2 and CO2/CH4, excellent H2 uptakes, and efficient dye adsorption are observed. This research thus provides a general strategy for constructing stable 3D COF architectures with adjustable pores via improving the valency of rigid building blocks.

Design and Synthesis of a Zeolitic Organic Framework.

The development of novel zeolite-like materials with large channel windows and high stability is of importance but remains a tremendous challenge. Herein, we report the first example of a 3D covalent organic framework with zeolitic network, namely the zeolitic organic framework (ZOF). By combining two kinds of tetrahedral building blocks with fixed or relatively free bond angles, ZOF-1 with the zeolitic crb net has been successfully synthesized. Its structure was determined by the single-crystal 3D electron diffraction technique. Remarkably, ZOF-1 shows high chemical stability, large pore size (up to 16 Å), and excellent specific surface area (≈2785 m2 g-1 ), which is superior to its analogues with the same network, including traditional aluminosilicate zeolites and zeolitic imidazole frameworks. This study thus opens a new avenue to construct zeolite-like materials with pure organic frameworks and will promote their potential applications in adsorption and catalysis for macromolecules.

Three-Dimensional Mesoporous Covalent Organic Frameworks through Steric Hindrance Engineering.

The development of three-dimensional (3D) covalent organic frameworks (COFs) with large pores and high surface areas is of great importance for various applications. However, it remains a major challenge due to the frequent structural interpenetration and pore collapse after the removal of guest species situated in the pores. Herein, we report for the first time a series of 3D mesoporous COFs through a general method of steric hindrance engineering. By placing methoxy and methyl groups strategically on the monomers, we can obtain non-interpenetrated 3D COFs of diamondoid structures with permanent mesopores (up to 26.5 Å) and high surface areas (>3000 m2 g-1), which are far superior to those of reported conventional COFs with the same topology. This work thus opens a new avenue to create 3D large-pore COFs for potential applications in adsorption and separation of large inorganic, organic, and biological molecules.

Ambient aqueous-phase synthesis of covalent organic frameworks for degradation of organic pollutants.

The development of a mild, low cost and green synthetic route for covalent organic frameworks (COFs) is highly desirable in order to open the door for practical uses of this new family of crystalline porous solids. Herein, we report a general and facile strategy to prepare a series of microporous or mesoporous COFs by a ß-ketoenamine based Michael addition-elimination reaction in aqueous systems at ambient temperature and pressure. This synthesis method not only produces highly crystalline and porous COFs, but also can be carried out with a high reaction rate (only 30 min), high yields (as high as 93%) and large-scale preparation (up to 5.0 g). Furthermore, an Fe(ii)-doped COF shows impressive performance in the oxidative degradation of organic pollutants in aqueous medium. This research thus provides a promising pathway to large-scale green preparation of COFs and their potential application in environmental remediation.