Effect of baseline prolactin levels on the pregnancy outcomes after fresh embryo transfer.

BACKGROUND AND AIMS: There is clinical disagreement on whether to treat hyperprolactinemia with medication before embryo transfer. The aim of this study is to identify the impact of basal prolactin (PRL) levels on pregnancy outcomes in fresh embryo transfer cycles. METHODS: This retrospective study involved 2,648 women who underwent basal PRL level testing and fresh embryo transfer between January 2015 and December 2020 at our Hospital's Department of Assisted Reproduction. Basal PRL levels can be classified into three categories: <30 (n = 2339), 30­60 (n = 255), and ≥60 (n = 54) µg/l. Pregnancy outcome was defined as the primary outcome measure, and the live birth rate was defined as the second outcome measure. Subsequently, univariate and multivariable logistic regression analysis was used to reveal the association between basal PRL levels and pregnancy outcomes after considering several potential confounding factors. RESULTS: Elevated basal PRL levels were found not a risk factor for pregnancy outcomes in patients receiving good-quality embryo transfer (p > .05). For pregnancy or not, female age (OR: 1.03; 95% CI: 1.01-1.05), embryos transferred (OR: 0.52; 95% CI: 0.41-0.65), and normal fertilization rate (OR: 0.68; 95% CI: 0.48-0.97) were found to be an independent risk factor. For ongoing pregnancy or not, female age (OR: 1.07; 95% CI: 1.03-1.11), embryos transferred (OR: 0.57; 95% CI: 0.37-0.88), and menstrual cycle (OR: 1.76; 95% CI: 1.22-2.54) were also independent risk factors. CONCLUSION: There is no adverse impact on pregnancy outcomes during embryo transfer cycles with good-quality embryos when PRL levels are elevated.

Extended balloon stent placement for reducing intrauterine adhesion recurrence: a retrospective cohort study.

RESEARCH QUESTION: What are the efficacy, safety and reproductive outcomes of intrauterine balloon stent placement for 4 or 6 weeks after hysteroscopic adhesiolysis? DESIGN: This retrospective cohort study was conducted at a university-affiliated hospital, and included 155 women with moderate to severe intrauterine adhesions who underwent hysteroscopic adhesiolysis between March 2016 and December 2019. Participants were divided according to whether the heart-shaped balloon stent was left in place for 4 (group 1) or 6 (group 2) weeks after surgery. Stents removed at the second-look hysteroscopy 4 or 6 weeks after surgery were sent for culturing of common bacteria. The incidence of adhesion reformation, adhesion score reduction, bacterial colonization of the intrauterine balloon stent, live birth rate and time to live birth were analysed. RESULTS: Group 2 had a significantly lower adhesion reformation rate (45.7% versus 28.2%, P = 0.024) and a more significant reduction in adhesion score (5.2 ± 2.1 versus 6.3 ± 2.2, P = 0.003) compared with group 1. However, no statistical difference was observed in the percentage of bacterial colonization of the intrauterine balloon stent (55.9% versus 66.7%, P = 0.174), live birth rate (52.4% versus 42.3%, P = 0.331) or time to live birth (hazard ratio 1.09, 95% confidence interval 0.60-1.96, P = 0.778) between the two groups. CONCLUSIONS: Extending intrauterine balloon stent use from 4 to 6 weeks further reduces the adhesion reformation rate after hysteroscopic adhesiolysis in patients with moderate to severe intrauterine adhesion. No increase in bacterial colonization of the balloon stent was observed. Extending the duration of intrauterine balloon stent placement did not significantly affect live birth rates.

Microwave-assisted catalytic pyrolysis of waste cooking oil to monocyclic aromatics under a bifunctional SiC ball catalyst.

Catalytic pyrolysis technology proves to be a highly effective approach for waste cooking oil management. However, high-pressure drops and easy deactivation of powder catalysts hinder the industrialization of this technology. In this study, a bifunctional SiC ball (ZSM-5/SiC ball structured) catalyst was prepared to produce monocyclic aromatics. Bifunctional SiC ball catalyst demonstrates notable microwave-responsive properties and remarkable catalytic efficacy. Results showed that the content of monocyclic aromatics under BFSB catalysis with microwave heating was the highest. Weight hourly space velocity is no longer one of the main factors affecting microwave-assisted catalytic pyrolysis under bifunctional SiC ball catalyst. Monocyclic aromatics content did not decrease significantly and was still higher than 86% when space velocity increased from 30 h-1 to 360 h-1. The highest space velocity could only be 180 h-1 under Powder ZSM-5, and the content of the monocyclic aromatics dropped rapidly to 67.68%. Furthermore, even after five operating cycles, the content of monocyclic aromatics with bifunctional SiC ball catalyst continues to surpass the initial content observed with Powder ZSM-5 at 500 °C and 180 h-1. Related characterizations revealed that coking is the primary cause of catalyst deactivation for both catalyst types; however, the bifunctional SiC ball catalyst exhibits a 29.1% lower occurrence of polyaromatic coke formation compared to Powder ZSM-5.

ZSM-5@ceramic foam composite catalyst derived from spent bleaching clay for continuous pyrolysis of waste oil to produce monocyclic aromatic hydrocarbons.

Spent bleaching clay, a solid waste generated during the refining process of vegetable oils, lacks an efficient treatment solution. In this study, spent bleaching clay was innovatively employed to fabricate ceramic foams. The thermal stability analysis, microstructure, and crystal phase composition of the ceramic foams were characterized by TG-DSC, SEM, and XRD. An investigation into the influence of Al2O3 content on the ceramic foams was conducted. Results showed that, as the Al2O3 content increased from 15 wt% to 30 wt%, there was a noticeable decrease in bulk density and linear shrinkage, accompanied by an increase in compressive strength. Additionally, the ceramic foams were used as catalyst supports, to synthesize ZSM-5@ceramic foam composite catalysts for pyrolysis of waste oil. The open pores of the ZSCF catalyst not only reduced diffusion path length but also facilitated the exposure of more acid sites, thereby increasing the utilization efficiency of ZSM-5 zeolite. This, in turn, engendered a significant enhancement in monocyclic aromatic hydrocarbons content from 39.15 % (ZSM-5 powder catalyst) to 78.96 %. Besides, a larger support pore size and a thicker ZSM-5 zeolite coating layer led to an increase in monocyclic aromatic hydrocarbons content. As the time on stream was extended to 56 min, the monocyclic aromatic hydrocarbon content obtained with the composite catalyst remained 12.41 % higher than that of the ZSM-5 powder catalyst. These findings validate the potential of the composite catalyst. In essence, this study advances the utilization of spent bleaching clay and introduces a novel concept for ceramic foam fabrication. Furthermore, it contributes to the scaling up of catalytic pyrolysis technology.

Detoxification of copper and zinc from anaerobic digestate effluent by indigenous bacteria: Mechanisms, pathways and metagenomic analysis.

The presence of organic-complexed copper and zinc in anaerobic digestate effluent (ADE) poses persistent ecological toxicity. This study investigated the detoxification performance and biotic responses of indigenous bacteria against ethylene diamine tetraacetic acid (EDTA)-complexed Cu(II) and Zn(II). Heavy metals (HMs) stress induced reactive oxygen species (ROS) generation and enhanced extracellular polymeric substances (EPS) secretion. At a Cu(II) influent concentration of 20.0 mg·L-1, indigenous bacteria removed 88.2% of Cu(II) within nine days. The majority of copper and zinc sequestered by bacteria were stored in the cell envelope, with over 50% of copper and 60% of zinc being immobilized. Transmission electron microscopy mapping (TEM-mapping) revealed significant mineralization of copper and zinc on the cell wall. Proteins abundant in EPS, alongside humic acid-like substances, effectively adsorbed HMs. Indigenous bacteria exhibited the capacity to reduce cupric to the cuprous state and cupric is preferentially reduced to cuprous before reaching reducing capacity saturation. Sulfur precipitation emerges as a crucial pathway for Zn(II) removal. Metagenomic analysis indicated that indigenous bacteria upregulated genes related to HMs homeostasis, efflux, and DNA repair, enhancing its resistance to high concentrations HMs. This study provided theoretical guidance for employing bacterial consortia to eliminate HMs in complex aquatic environments.

Oncologic and reproductive outcomes after fertility-sparing surgery for bilateral borderline ovarian tumors: A retrospective study.

OBJECTIVES: To investigate the oncological safety and fertility outcomes of different fertility-sparing surgery procedures for bilateral borderline ovarian tumors (BOTs) and to identify the safest and most effective approach to help patients conceive with minimal risk. STUDY DESIGN: A retrospective study of 144 patients (≤40 years) with pathologically confirmed bilateral BOTs were included in the study.The effects of surgery type on fertility outcome and recurrence were compared. Cox regression analysis was employed to determine potential prognostic factors. Survival analysis utilized the Kaplan-Meier method. RESULTS: Three therapeutic modalities were applied in our study, including bilateral ovarian cystectomy (BOC; n = 29), unilateral adnexectomy + contralateral cystectomy (UAC; n = 4) and radical surgery (n = 61). Totally 33 cases (22.9 %) relapsed during the follow-up period. In 37 % of cases administered conservative surgery, relapses were diagnosed in the first 2 years. Only conservative surgery and adjuvant chemotherapy were risk factors for recurrence. Meanwhile, a pregnancy rate of 55.4 % was obtained in patients with bilateral BOTs. The pregnancy rate was slightly higher but no significant (P = 0.539) difference in patients treated with BOC (n = 17, 63 %) compared with UAC (n = 29, 55.8 %) group. GnRHa treatment significantly improved the clinical pregnancy rate in this study(P = 0.029). CONCLUSIONS: Satisfactory pregnancy rate can be achieved after conservative surgery in patients with bilateral BOTs. BOC is worth recommending for bilateral borderline ovarian tumors and a critical factor in fertility is the preservation of maximum healthy ovarian tissue. Patients should make a pregnancy plan in 2 years after the first surgery. GnRHa increase the rate of successful clinical pregnancies.

Structural Modification of Noscapine via Photoredox/Nickel Dual Catalysis for the Discovery of S-Phase Arresting Agents.

Herein, we disclose a powerful strategy for the functionalization of the antitumor natural alkaloid noscapine by utilizing photoredox/nickel dual-catalytic coupling technology. A small collection of 37 new noscapinoids with diverse (hetero)alkyl and (hetero)cycloalkyl groups and enhanced sp3 character was thus synthesized. Further in vitro antiproliferative activity screening and SAR study enabled the identification of 6o as a novel, potent, and less-toxic anticancer agent. Furthermore, 6o exerts superior cellular activity via an unexpected S-phase arrest mechanism and could significantly induce cell apoptosis in a dose-dependent manner, thereby further highlighting its potential in drug discovery as a promising lead compound.

Elimination of copper obstacle factor in anaerobic digestion effluent for value-added utilization: Performance and resistance mechanisms of indigenous bacterial consortium.

The presence of excessive residual Cu(II), a high-risk heavy metal with potential toxicity and biomagnification property, substantially impede the value-added utilization of anaerobic digestion effluent (ADE). This study adapted indigenous bacterial consortium (IBCs) to eliminate Cu(II) from ADE, and their performances and resistance mechanisms against Cu(II) were analyzed. Results demonstrated that when the Cu(II) exposure concentration exceeded 7.5 mg/L, the biomass of IBCs decreased significantly, cells produced a substantial amount of ROS and EPS, at which time the intracellular Cu(II) content gradually decreased, while Cu(II) accumulation within the EPS substantially increased. The combined features of a high PN/PS ratio, a reversed Zeta potential gradient, and abundant functional groups within EPS collectively render EPS a primary diffusion barrier against Cu(II) toxicity. Mutual physiological and metagenomics analyses reveal that EPS synthesis and secretion, efflux, DNA repair along with coordination between each other were the primary resistance mechanisms of IBCs against Cu(II) toxicity. Furthermore, IBCs exhibited enhanced resistance by enriching bacteria carrying relevant resistance genes. Continuous pretreatment of actual ADE with IBCs at a 10-day hydraulic retention time (HRT) efficiently eliminated Cu(II) concentration from 5.01 mg/L to ∼0.68 mg/L by day 2. This elimination remained stable for the following 8 days of operation, further validated their good Cu(II) elimination stability. Notably, supplementing IBCs with 200 mg/L polymerized ferrous sulfate significantly enhanced their settling performance. By elucidating the intricate interplay of Cu(II) toxicity and IBC resistance mechanisms, this study provides a theoretical foundation for eliminating heavy metal barriers in ADE treatment.

Research Progress in Modifications, Bioactivities, and Applications of Medicine and Food Homologous Plant Starch.

Starchy foods are an essential part of people's daily diet. Starch is the primary substance used by plants to store carbohydrates, and it is the primary source of energy for humans and animals. In China, a variety of plants, including edible medicinal plants, such as Pueraria root, yam tuber and coix seed, are rich in starch. However, limited by their inherent properties, kudzu starch and other starches are not suitable for the modern food industry. Natural starch is frequently altered by physical, chemical, or biological means to give it superior qualities to natural starch as it frequently cannot satisfy the demands of industrial manufacturing. Therefore, the deep processing market of modified starch and its products has a great potential. This paper reviews the modification methods which can provide excellent functional, rheological, and processing characteristics for these starches that can be used to improve the physical and chemical properties, texture properties, and edible qualities. This will provide a comprehensive reference for the modification and application of starch from medicinal and edible plants.

Huge uterine abscess after myomectomy: A case report.

RATIONALE: Uterine abscess is a rare gynecologic entity and only a few cases have been reported so far. This study aimed to describe our clinical experience in this case. Initially, hematoma was diagnosed without detail previous medical record. Finally, laparotomy was performed due to refractory fever and highly possible diagnosis of uterine abscess. We successfully performed a hysterectomy and the patient had an uneventful recovery. PATIENT CONCERNS: A 44-year-old nulliparous woman underwent myomectomy in the local hospital, 45 days ago. She complained of irregular fever (up to 40 °C) without abdominal pain since the surgery. DIAGNOSES: Due to lack of her detail medical record, equivocal images and her strong intention to preserve uterus, she was misdiagnosed with hematoma and treated with antibiotic treatment. Finally, intraoperative findings revealed that the huge myometrial abscess contained a mass of pus. INTERVENTIONS: Laparotomy was performed due to refractory high-grade fever and highly possible diagnosis of uterine abscess. Total hysterectomy was performed to avoid the possibility of life-threatening sepsis. OUTCOMES: The postoperative course was uneventful and the patient was discharged 10 days after surgery. LESSONS: Complete imaging examinations are recommended prior myomectomy to facilitate the differential diagnosis of postoperative complications. In addition, several measures, such as maintaining aseptic conditions during surgery and postoperative drainage, play a critical role in preventing nosocomial infections. Rare uterine abscess is often mistaken for hematoma with fever. If the patient develops high fever after myomectomy, accompanied by a mass in the myometrium, the possibility of infection or even abscess formation should not be excluded. For women who need to preserve their fertility, the early diagnosis and timely administration of appropriate medication is crucial for preventing uterine loss.

Construction and Validation of a Gastric Cancer Diagnostic Model based on Blood Groups and Tumor Markers.

Objective: The aim of this study is to explore the value of combined detection of ABO blood group and tumor markers in the diagnosis of gastric cancer. Methods: A total of 3650 gastric cancer patients treated in our center from January 2015 to December 2019, and 5822 controls were recruited, and divided into training set and validation set according to 7:3. The diagnostic and predictive model of gastric cancer was constructed by binary logistic regression method in the training set. The diagnostic value of the prediction model for gastric cancer was evaluated by calculating the prediction probability P value and drawing the Receiver operating characteristic (ROC) curve, and was verified in the validation set. Results: The Area under the curve (AUC) of the diagnosis and prediction model in the training set was 0.936 (95%CI: 0.926-0.941), the sensitivity was 81.66%, and the specificity was 98.61%. In the validation set, the AUC was 0.941 (95%CI: 0.932-0.950), the sensitivity was 82.33%, and the specificity was 99.02%. Furthermore, the diagnostic model obtained in this study had a high diagnostic value for early gastric cancer patients in the healthy population (AUC of training set, validation set and total population were 0.906, 0.920 and 0.908, respectively). Conclusions: We constructed a diagnostic model for gastric cancer including blood group and tumor markers, which has high reference value for the diagnosis of gastric cancer patients, and the model can better distinguish early gastric cancer from healthy people.

Synergistic effects of Fe-based nanomaterial catalyst on humic substances formation and microplastics mitigation during sewage sludge composting.

In this study, a novel Fe-based nanomaterial catalyst (Fe0/FeS) was synthesized via a self-heating process and employed to explore its impact on the formation of humic substances and the mitigation of microplastics. The results reveal that Fe0/FeS exhibited a significant increase in humic acid content (71.01 mg kg-1). Similarly, the formation of humic substances resulted in a higher humification index (4.91). Moreover, the addition of Fe0/FeS accelerated the degradation of microplastics (MPs), resulting in a lower concentration of MPs (9487 particles/kg) compared to the control experiments (22792 particles/kg). Fe0/FeS significantly increased the abundance of medium-sized MPs (50-200 µm) and reduced the abundance of small-sized (10-50 µm) and large-sized MPs (>1000 µm). These results can be attributed to the Fe0/FeS regulating the ▪OH production and specific microorganisms to promote humic substance formation and the degradation of MPs. This study proposes a feasible strategy to improve composting characteristics and reduce contaminants.

Resource utilization of wastepaper and bentonite: Cu(II) removal in the aqueous environment.

Contamination of heavy metals has always been a pressing concern. The dry-wet alternately treated carboxymethylcellulose bentonite (DW-CB) was successfully prepared by intercalating bentonite (BT) with carboxymethyl cellulose (CMC) obtained by solvent processes using enzymatically digested wastepaper as cellulosic raw material, and the adsorption capacity of Cu2+ on DW-CB in aqueous solution was investigated. A 98.18 ± 2.31 % removal efficiency was achieved by 4 g/L of DW-CB after 8 h in a solution containing 100 mg/L of Cu2+, which were 4.1 times and 1.5 times of that of BT and adsorbent prepared without alternating dry-wet process, respectively. The introduction of -COOH groups during the preparation of DW-CB enhanced the electrostatic interaction between DW-CB and Cu2+, which was the main driving force for Cu2+ removal. The pseudo-first-order kinetic model and Langmuir model better described the adsorption process and adsorption capacity of Cu2+ on DW-CB. DW-CB still showed high removal of Cu2+ (19.61 ± 0.99 mg/g) in the presence of multiple metal ions, while exhibiting the potential for removal of Zn2+, Mg2+ and K+, especially Mg2+ (22.69 ± 1.48 mg/g). However, the interactions of organics with Cu2+ severely affected the removal of Cu2+ by DW-CB (removal efficiency: 17.90 ± 4.17 % - 95.33 ± 0.27 %). In this study, an adsorbent with high targeted adsorption of Cu2+ was prepared by utilizing wastepaper and BT, which broadened the way of wastepaper resource utilization and had good economic and social benefits.

Stability and bioactivities evaluation of analytical grade C-phycocyanin during the storage of Spirulina platensis powder.

C-phycocyanin (C-PC) is a natural high-value blue phycobiliprotein from Spirulina platensis, which has wide biological applications in food, pharmaceutical, and cosmetics. However, the freshness of S. platensis powder (SPP) materials and C-PC purification play critical roles in evaluating the stability and bioactivities of C-PC, which severely affect its commercial application. This study investigated the effect of spray-dried SPP freshness on the biofunctional activities of analytical grade C-PC (AGC-PC). The yield of AGC-PC extracted from spray-dried SPP could reach 101.88 mg/g (75% recovery ratio) after purification by reversed phase high-performance liquid chromatography (RP-HPLC) system. The half-life period (t1/2 ) of AGC-PC stability at 60°C and 8000 lux light could remain 171.70 min and 176.11 h within 6 months storage of spray-dried SPP. The emulsifying activity index (EAI) and foaming capacity (FC) of AGC-PC from fresh-dried SPP showed maximum values of 68.64 m2 /g and 252.9%, respectively. The EC50 of AGC-PC from fresh spray-dried SPP on 2,2-diphenyl-1-picrylhydrazyl (DPPH) and 2,2'-azinobis(3-ethylbenzothiazoline -6-sulfonic acid (ABTS+·) scavenging activity could reach 63.76 and 92.93 mg/L, respectively. The EC50 of AGC-PC from fresh spray-dried SPP on proteinase inhibition and anti-lipoxygenase activity were 302.96 and 178.8 mg/L, respectively. The stability and biofunctional activities of AGC-PC remained stable within 6 months storage of SPP, and then rapidly decreased after 9 months storage due to the disintegration of the trimeric (αß)3 and hexameric (αß)6 forms of C-PC. It is concluded that the optimal storage period of SPP for preparation of AGC-PC in commercial use should be less than 6 months. PRACTICAL APPLICATION: The C-phycocyanin (C-PC) from dried Spirulina platensis powder (SPP) has been widely applied in food nutritional, florescent markers, pharmaceuticals, cosmetics, etc, due to its blue color, fluorescence, and antioxidant properties. However, the effect of dried SPP freshness on the stability and functional activity of C-PC has been rarely reported. This study found that the thermostability, photostability, emulsifying, antioxidant, and anti-inflammatory activities of analytical grade C-PC (AGC-PC) significantly decreased after 6 months storage of SPP. Based on investigations, we have proposed that the suitable storage time of dried SPP for preparation of AGC-PC in commercial application should be within 6 months.

Stabilization of emulsions prepared by ball milling and cellulase treated pomelo peel insoluble dietary fiber: Integrity of porous fiber structure dominates the stability.

Emulsion gels from the pomelo peel insoluble dietary fiber (PIDF) were developed. The emulsification potentials of PIDFs subjected to various degrees of ball milling (M-PIDFs), cellulase hydrolysis (C-PIDF), and cellulase hydrolysis followed by ball milling (CM-PIDFs) were evaluated. Emulsions prepared by M-PIDFs for different lengths of ball milling time exhibited similar stability characteristics, confirming that M-PIDF emulsion stability might be determined by the three-dimensional structure formed by M-PIDF stacking and oil droplet capture. C-PIDF had characteristics resembling those of Pickering particles. CM-PIDF emulsions got destabilized with ball milling time prolongation. Interface tension and particle size of C/CM-PIDF decreased gradually during ball milling. Rheological and fluorescence microscopy results revealed that the intact internal crosslinking structure frameworks were disrupted in CM-PIDF emulsions. Therefore, intact fiber-based networks, rather than small particle size or low interfacial tension, determine the stability of PIDF emulsions. This study deepens the understanding of PIDF as a clean emulsifier.

Preparation, Structural Characterization, and Enzymatic Properties of Alginate Lyase Immobilized on Magnetic Chitosan Microspheres.

Alginate lyase is an enzyme that catalyses the hydrolysis of alginate into alginate oligoalginates. To enhance enzyme stability and recovery, a facile strategy for alginate lyase immobilization was developed. Novel magnetic chitosan microspheres were synthesized and used as carriers to immobilize alginate lyase. The immobilization of alginate lyase on magnetic chitosan microspheres was successful, as proven by Fourier transform infrared spectroscopy and X-ray diffraction spectra. Enzyme immobilization exhibited the best performance at an MCM dosage of 1.5 g/L, adsorption time of 2.0 h, glutaraldehyde concentration of 0.2%, and immobilization time of 2.0 h. The optimal pH of the free alginate lyase was 7.5, and this pH value was shifted to 8.0 after immobilization. No difference was observed at the optimal temperature (45 °C) for the immobilized and free enzymes. The immobilized alginate lyase displayed better thermal stability than the free alginate lyase. The Km values of the free and immobilized enzymes were 0.05 mol/L and 0.09 mol/L, respectively. The immobilized alginate lyase retained 72% of its original activity after 10 batch reactions. This strategy was found to be a promising method for immobilizing alginate lyase.

Preparation and application of metal-modified biochar in the purification of micro-polystyrene polluted aqueous environment.

Microplastics (MPs) have already spread across the globe and have been found in drinking water and human tissues. This may pose severe threats to human health and water environment. Therefore, this study accurately evaluated the removal effect of metal-modified biochar on polystyrene microplastics (PS-MPs) (1.0 µm) in the water environment using a high-throughput fluorescence quantification method. The results indicated that Fe-modified biochar (FeBC) and Fe/Zn-modified biochar (Fe/ZnBC) had good removal efficiencies for PS-MPs under the dosage of 3 g/L, which were 96.24% and 84.77%, respectively. Although pore effects were observed (such as "stuck", "trapped"), the electrostatic interaction was considered the main mechanism for the adsorption of PS-MPs on metal-modified biochar, whereas the formation of metal-O-PS-MPs may also contribute to the adsorption process. The removal efficiency of PS-MPs by FeBC was significantly reduced under alkaline conditions (pH = 9 and 11) or in the presence of weak acid ions (PO43-, CO32-, HCO3-). A removal efficiency of 72.39% and 78.33% of PS-MPs was achieved from tap water (TW) and lake water (LW) using FeBC when the initial concentration was 20 mg/L. However, FeBC had no removal effect on PS-MPs in biogas slurry (BS) and brewing wastewater (BW) due to the direct competitive adsorption of high concentrations of chemical oxygen demand (COD). The findings of this study highlighted that metal-modified biochar had a potential application in purifying tap water or lake water which contaminated by MPs.

[Research Progress on Distribution Characteristics and Formation Mechanisms of Microplastics in the Environment].

The extensive application of plastic products leads to the increasingly significant harm of plastic wastes to the ecological environment, which is also a focus of global environmental issues. Due to the lack of a sound plastic waste management system, most plastic waste is still treated by the traditional mode or remains in the environment, with low recycling efficiency, and the plastic life cycle has not yet formed. Plastics in the environment will age and degrade under the actions of physical (wear, waves), chemical (ultraviolet radiation, hydrolysis), and biological (fungi, bacteria) factors for a long time and generate micro (nano) plastics. Due to their small particle size, large specific surface area, and charged characteristics, in addition to their own toxicity, they can also be used as carriers or covert carriers of pollutants (heavy metals, persistent organic pollutants, polycyclic aromatic hydrocarbons, bacteria, etc.) to migrate in the environment through runoff, sewage discharge, and hydrometeorology, causing ecological environmental pollution. MPs pollution has been listed as the second largest scientific problem in the field of environmental and ecological science by the United Nations Environment Programme. MPs are widely distributed, and there are different degrees of MPs pollution in the global water (freshwater, ocean), soil, and atmospheric environment. Traces of MPs have also been found in human placentas, human breastmilk, living lungs, and blood in recent years. Therefore, the formation mechanisms of MPs under the actions of physics, chemistry, and microorganisms, as well as their abundance levels and migration characteristics in water, soil, and atmosphere environment were comprehensively reviewed, with the hope of providing reference for monitoring the pollution levels of MPs in the environment, exploring their transport laws in the environment, proposing the management strategy of MPs pollution, and revealing the degradation mechanisms of MPs under different effects.

Macadamia oil-based oleogels as cocoa butter alternatives: Physical properties, oxidative stability, lipolysis, and application.

In this study, macadamia oil-based oleogels were prepared using monoglyceride stearate (MG) as a gelator with a low critical gelation concentration (3.0 wt%). The physical properties of the oleogels were evaluated by polarized light microscopy, Fourier transform infrared spectroscopy, differential scanning calorimetry, X-ray diffraction, texture and rheological analysis. And the lipid digestion and oxidative stability of the macadamia oil were determined by pH titration and accelerated oxidation test, respectively. The results showed that the hardness, oil binding capacity, and thermal stability of the oleogels increased with increasing MG concentration, which was attributed to the formation of a network of MG crystals held together by van der Waals interactions and hydrogen bonds. Rheological analysis indicated that all the oleogels exhibited a thermally reversible solid-to-liquid transition and viscoelastic behavior at ambient temperatures. Moreover, the formation of oleogels increased fatty acid release during in vitro lipid digestion and improved the oxidative stability of the macadamia oil. In addition, the potential application of these oleogels as replacements for saturated fats in foods was demonstrated by creating a chocolate product where the cocoa butter was replaced with macadamia oil-based oleogels with a high degree of unsaturation. These results can provide guidance for the preparation of macadamia oil-based oleogels, which may increase their application in foods.