Non-Noble Metal High-Entropy Alloy-Based Catalytic Electrode for Long-Life Hydrogen Gas Batteries.

The development of efficient, stable, and low-cost bifunctional catalysts for the hydrogen evolution/oxidation reaction (HER/HOR) is critical to promote the application of hydrogen gas batteries in large scale energy storage systems. Here we demonstrate a non-noble metal high-entropy alloy grown on Cu foam (NNM-HEA@CF) as a self-supported catalytic electrode for nickel-hydrogen gas (Ni-H2) batteries. Experimental and theoretical calculation results reveal that the NNM-HEA catalyst greatly facilitates the HER/HOR catalytic process through the optimized electronic structures of the active sites. The assembled Ni-H2 battery with NNM-HEA@CF as the anode shows excellent rate capability and exceptional cycling performance of over 1800 h without capacity decay at an areal capacity of 15 mAh cm-2. Furthermore, a scaled-up Ni-H2 battery fabricated with an extended capacity of 0.45 Ah exhibits a high cell-level energy density of ∼109.3 Wh kg-1. Moreover, its estimated cost reaches as low as ∼107.8 $ kWh-1 based on all key components of electrodes, separator and electrolyte, which is reduced by more than 6 times compared to that of the commercial Pt/C-based Ni-H2 battery. This work provides an approach to develop high-efficiency non-noble metal-based bifunctional catalysts for hydrogen batteries in large-scale energy storage applications.

An All-Climate Nonaqueous Hydrogen Gas-Proton Battery.

Rechargeable hydrogen gas batteries, driven by hydrogen evolution and oxidation reactions (HER/HOR), are emerging grid-scale energy storage technologies owing to their low cost and superb cycle life. However, compared with aqueous electrolytes, the HER/HOR activities in nonaqueous electrolytes have rarely been studied. Here, for the first time, we develop a nonaqueous proton electrolyte (NAPE) for a high-performance hydrogen gas-proton battery for all-climate energy storage applications. The advanced nonaqueous hydrogen gas-proton battery (NAHPB) assembled with a representative V2(PO4)3 cathode and H2 anode in a NAPE exhibits a high discharge capacity of 165 mAh g-1 at 1 C at room temperature. It also efficiently operates under all-climate conditions (from -30 to +70 °C) with an excellent electrochemical performance. Our findings offer a new direction for designing nonaqueous proton batteries in a wide temperature range.

Electrochemically and Thermally Stable Inorganics-Rich Solid Electrolyte Interphase for Robust Lithium Metal Batteries.

Severe dendrite growth and high-level activity of the lithium metal anode lead to a short life span and poor safety, seriously hindering the practical applications of lithium metal batteries. With a trisalt electrolyte design, an F-/N-containing inorganics-rich solid electrolyte interphase on a lithium anode is constructed, which is electrochemically and thermally stable over long-term cycles and safety abuse conditions. As a result, its Coulombic efficiency can be maintained over 98.98% for 400 cycles. An 85.0% capacity can be retained for coin-type full cells with a 3.14 mAh cm-2 LiNi0.5 Co0.2 Mn0.3 O2 cathode after 200 cycles and 1.0 Ah pouch-type full cells with a 4.0 mAh cm-2 cathode after 72 cycles. During the thermal runaway tests of a cycled 1.0 Ah pouch cell, the onset and triggering temperatures were increased from 70.8 °C and 117.4 °C to 100.6 °C and 153.1 °C, respectively, indicating a greatly enhanced safety performance. This work gives novel insights into electrolyte and interface design, potentially paving the way for high-energy-density, long-life-span, and thermally safe lithium metal batteries.

A Solid-State Electrolyte Based on Li0.95 Na0.05 FePO4 for Lithium Metal Batteries.

Solid-state electrolytes (SSEs) play a crucial role in developing lithium metal batteries (LMBs) with high safety and energy density. Exploring SSEs with excellent comprehensive performance is the key to achieving the practical application of LMBs. In this work, the great potential of Li0.95 Na0.05 FePO4 (LNFP) as an ideal SSE due to its enhanced ionic conductivity and reliable stability in contact with lithium metal anode is demonstrated. Moreover, LNFP-based composite solid electrolytes (CSEs) are prepared to further improve electronic insulation and interface stability. The CSE containing 50 wt% of LNFP (LNFP50) shows high ionic conductivity (3.58 × 10-4 S cm-1 at 25 °C) and good compatibility with Li metal anode and cathodes. Surprisingly, the LMB of Li|LNFP50|LiFePO4 cell at 0.5 C current density shows good cycling stability (151.5 mAh g-1 for 500 cycles, 96.5% capacity retention, and 99.3% Coulombic efficiency), and high-energy LMB of Li|LNFP50|Li[Ni0.8 Co0.1 Mn0.1 ]O2 cell maintains 80% capacity retention after 170 cycles, which are better than that with traditional liquid electrolytes (LEs). This investigation offers a new approach to commercializing SSEs with excellent comprehensive performance for high-performance LMBs.

Rechargeable Hydrogen-Chlorine Battery Operates in a Wide Temperature Range.

Hydrogen-chlorine (H2-Cl2) fuel cells have distinct merits due to fast electrochemical kinetics but are afflicted by high cost, low efficiency, and poor reversibility. The development of a rechargeable H2-Cl2 battery is highly desirable yet challenging. Here, we report a rechargeable H2-Cl2 battery operating statically in a wide temperature ranging from -70 to 40 °C, which is enabled by a reversible Cl2/Cl- redox cathode and an electrocatalytic H2 anode. A hierarchically porous carbon cathode is designed to achieve effective Cl2 gas confinement and activate the discharge plateau of Cl2/Cl- redox at room temperature, with a discharge plateau at ∼1.15 V and steady cycling for over 500 cycles without capacity decay. Furthermore, the battery operation at an ultralow temperature is successfully achieved in a phosphoric acid-based antifreezing electrolyte, with a reversible discharge capacity of 282 mAh g-1 provided by the highly porous carbon at -70 °C and an average Coulombic efficiency of 91% for more than 300 cycles at -40 °C. This work offers a new strategy to enhance the reversibility of aqueous chlorine batteries for energy storage applications in a wide temperature range.

Aqueous Organic Hydrogen Gas Proton Batteries with Ultrahigh-Rate and Ultralow-Temperature Performance.

Aqueous proton batteries (APBs) have emerged as one of the most promising batteries for large-scale energy storage technology. However, they usually show an undesirable electrochemical performance. Herein, we demonstrate a novel aqueous catalytic hydrogen gas powered organic proton (HOP) battery, which is driven by hydrogen evolution/oxidation redox reactions via commercial nanocatalysts on the anode and coordination/decoordination reactions of C═O with H+ on the cathode. The HOP battery shows an excellent rate capacity of 190.1 mAh g-1 at 1 A g-1 and 71.4 mAh g-1 at 100 A g-1. It also delivers a capacity of 96.6 mAh g-1 after 100000 cycles and operates at temperatures down to -70 °C. Moreover, the HOP battery is fabricated in a large-scale pouch cell with an extended capacity, exhibiting its potential for practical energy storage applications. This work provides new insights into the building of sustainable APBs, which will broaden the horizons of high-performance aqueous batteries.

2D Conjugated Metal-Organic Frameworks Embedded with Iodine for High-Performance Ammonium-Ion Hybrid Supercapacitors.

Ammonium ions (NH4 + ) are emerging non-metallic charge carriers for advanced electrochemical energy storage devices, due to their low cost, elemental abundance, and environmental benignity. However, finding suitable electrode materials to achieve rapid diffusion kinetics for NH4 + storage remains a great challenge. Herein, a 2D conjugated metal-organic framework (2D c-MOF) for immobilizing iodine, as a high-performance cathode material for NH4 + hybrid supercapacitors, is reported. Cu-HHB (HHB = hexahydroxybenzene) MOF embedded with iodine (Cu-HHB/I2 ) features excellent electrical conductivity, highly porous structure, and rich accessible active sites of copper-bis(dihydroxy) (Cu─O4 ) and iodide species, resulting in a remarkable areal capacitance of 111.7 mF cm-2 at 0.4 mA cm-2 . Experimental results and theoretical calculations indicate that the Cu─O4 species in Cu-HHB play a critical role in binding polyiodide and suppressing its dissolution, as well as contributing to a large pseudocapacitance with adsorbed iodide. In combination with a porous MXene anode, the full NH4 + hybrid supercapacitors deliver an excellent energy density of 31.5 mWh cm-2 and long-term cycling stability with 89.5% capacitance retention after 10 000 cycles, superior to those of the state-of-the-art NH4 + hybrid supercapacitors. This study sheds light on the material design for NH4 + storage, enabling the development of novel high-performance energy storage devices.

Anions Regulation Engineering Enables a Highly Reversible and Dendrite-Free Nickel-Metal Anode with Ultrahigh Capacities.

The development of safe and high-energy metal anodes represents a crucial research direction. Here, the achievement of highly reversible, dendrite-free transition metal anodes with ultrahigh capacities by regulating aqueous electrolytes is reported. Using nickel (Ni) as a model, theoretical and experimental evidence demonstrating the beneficial role of chloride ions in inhibiting and disrupting the nickel hydroxide passivation layer on the Ni electrode is provided. As a result, Ni anodes with an ultrahigh areal capacity of 1000 mAh cm-2 (volumetric capacity of ≈6000 mAh cm-3 ), and a Coulombic efficiency of 99.4% on a carbon substrate, surpassing the state-of-the-art metal electrodes by approximately two orders of magnitude, are realized. Furthermore, as a proof-of-concept, a series of full cells based on the Ni anode is developed. The designed Ni-MnO2 full battery exhibits a long lifespan of 2000 cycles, while the Ni-PbO2 full battery achieves a high areal capacity of 200 mAh cm-2 . The findings of this study are important for enlightening a new arena toward the advancement of dendrite-free Ni-metal anodes with ultrahigh capacities and long cycle life for various energy-storage devices.

Ultrafast Electrical Pulse Synthesis of Highly Active Electrocatalysts for Beyond-Industrial-Level Hydrogen Gas Batteries.

The high reliability and proven ultra-longevity make aqueous hydrogen gas (H2 ) batteries ideal for large-scale energy storage. However, the low alkaline hydrogen evolution and oxidation reaction (HER/HOR) activities of expensive platinum catalysts severely hamper their widespread applications in H2 batteries. Here, cost-effective, highly active electrocatalysts, with a model of ruthenium-nickel alloy nanoparticles in ≈3 nm anchored on carbon black (RuNi/C) as an example, are developed by an ultrafast electrical pulse approach for nickel-hydrogen gas (NiH2 ) batteries. Having a competitive low cost of about one fifth of Pt/C benckmark, this ultrafine RuNi/C catalyst displays an ultrahigh HOR mass activity of 2.34 A mg-1 at 50 mV (vs RHE) and an ultralow HER overpotential of 19.5 mV at a current density of 10 mA cm-2 . As a result, the advanced NiH2 battery can efficiently operate under all-climate conditions (from -25 to +50 °C) with excellent durability. Notably, the NiH2 cell stack achieves an energy density up to 183 Wh kg-1 and an estimated cost of ≈49 $ kWh-1 under an ultrahigh cathode Ni(OH)2 loading of 280 mg cm-2 and a low anode Ru loading of ≈62.5 µg cm-2 . The advanced beyond-industrial-level hydrogen gas batteries provide great opportunities for practical grid-scale energy storage applications.

Solid-Liquid-Gas Management for Low-Cost Hydrogen Gas Batteries.

Aqueous nickel-hydrogen gas (Ni-H2) batteries with excellent durability (>10,000 cycles) are important candidates for grid-scale energy storage but are hampered by the high-cost Pt electrode with limited performance. Herein, we report a low-cost nickel-molybdenum (NiMo) alloy as an efficient bifunctional hydrogen evolution and oxidation reaction (HER/HOR) catalyst for Ni-H2 batteries in alkaline electrolytes. The NiMo alloy demonstrates a high HOR mass-specific kinetic current of 28.8 mA mg-1 at 50 mV as well as a low HER overpotential of 45 mV at a current density of 10 mA cm-2, which is better than most nonprecious metal catalysts. Furthermore, we apply a solid-liquid-gas management strategy to constitute a conductive, hydrophobic network of NiMo using multiwalled carbon nanotubes (NiMo-hydrophobic MWCNT) in the electrode to accelerate HER/HOR activities for much improved Ni-H2 battery performance. As a result, Ni-H2 cells based on the NiMo-hydrophobic MWCNT electrode show a high energy density of 118 Wh kg-1 and a low cost of only 67.5 $ kWh-1. With the low cost, high energy density, excellent durability, and improved energy efficiency, the Ni-H2 cells show great potential for practical grid-scale energy storage.

pH-Universal Decoupled Water Electrolysis Enabled by Electrocatalytic Hydrogen Gas Capacitive Chemistry.

In conventional water electrolysis (CWE), the H2 and O2 evolution reactions (HER/OER) are tightly coupled, making the generated H2 and O2 difficult to separate, thus resulting in complex separation technology and potential safety issues. Previous efforts on the design of decoupled water electrolysis mainly concentrated on multi-electrode or multi-cell configurations; however, these strategies have the limitation of involving complicated operations. Here, we propose and demonstrate a pH-universal, two-electrode capacitive decoupled water electrolyzer (referred to as all-pH-CDWE) in a single-cell configuration by utilizing a low-cost capacitive electrode and a bifunctional HER/OER electrode to separate H2 and O2 generation for decoupling water electrolysis. In the all-pH-CDWE, high-purity H2 and O2 generation alternately occur at the electrocatalytic gas electrode only by reversing the current polarity. The designed all-pH-CDWE can maintain a continuous round-trip water electrolysis for over 800 consecutive cycles with an electrolyte utilization ratio of nearly 100%. As compared to CWE, the all-pH-CDWE achieves energy efficiencies of 94% in acidic electrolytes and 97% in alkaline electrolytes at a current density of 5 mA cm-2. Further, the designed all-pH-CDWE can be scaled up to a capacity of 720 C in a high current of 1 A for each cycle with a stable HER average voltage of 0.99 V. This work provides a new strategy toward the mass production of H2 in a facilely rechargeable process with high efficiency, good robustness, and large-scale applications.

Reversible, Dendrite-Free, High-Capacity Aluminum Metal Anode Enabled by Aluminophilic Interface Layer.

Aluminum (Al) metal is an attractive anode material for next-generation rechargeable batteries, because of its low cost and high capacities. However, it brings some fundamental issues such as dendrites, low Coulombic efficiency (CE), and low utilization. Here, we propose a strategy for constructing an ultrathin aluminophilic interface layer (AIL) to regulate the Al nucleation and growth behaviors, which enables highly reversible and dendrite-free Al plating/stripping under high areal capacity. Metallic Al can maintain stable plating/stripping on the Pt-AIL@Ti for over 2000 h at 10 mAh cm-2 with an average CE of 99.9%. The Pt-AIL also enables reversible Al plating/stripping at a record high areal capacity of 50 mAh cm-2, which is 1-2 orders of magnitude higher than the previous studies. This work provides a valuable direction for further construction of high-performance rechargeable Al metal batteries.

Constructing robust heterostructured interface for anode-free zinc batteries with ultrahigh capacities.

The development of Zn-free anodes to inhibit Zn dendrite formation and modulate high-capacity Zn batteries is highly applauded yet very challenging. Here, we design a robust two-dimensional antimony/antimony-zinc alloy heterostructured interface to regulate Zn plating. Benefiting from the stronger adsorption and homogeneous electric field distribution of the Sb/Sb2Zn3-heterostructured interface in Zn plating, the Zn anode enables an ultrahigh areal capacity of 200 mAh cm-2 with an overpotential of 112 mV and a Coulombic efficiency of 98.5%. An anode-free Zn-Br2 battery using the Sb/Sb2Zn3-heterostructured interface@Cu anode shows an attractive energy density of 274 Wh kg-1 with a practical pouch cell energy density of 62 Wh kg-1. The scaled-up Zn-Br2 battery in a capacity of 500 mAh exhibits over 400 stable cycles. Further, the Zn-Br2 battery module in an energy of 9 Wh (6 V, 1.5 Ah) is integrated with a photovoltaic panel to demonstrate the practical renewable energy storage capabilities. Our superior anode-free Zn batteries enabled by the heterostructured interface enlighten an arena towards large-scale energy storage applications.

Ultralow-Temperature Aqueous Conductive Polymer-Hydrogen Gas Battery.

Hydrogen gas batteries are regarded as one of the most promising rechargeable battery systems for large-scale energy storage applications due to their advantages of high rates and long-term cycle lives. However, the development of cost-effective and low-temperature-tolerant hydrogen gas batteries is highly desirable yet very challenging. Herein, we report a novel conductive polymer-hydrogen gas battery that is suitable for ultralow-temperature energy storage applications and consists of a hydrogen gas anode, a conductive polymer cathode using polyaniline (PANI) or polypyrrole as examples, and protonic acidic electrolytes. The PANI-H2 battery using 1 M H2SO4 as the electrolyte exhibits a capacity of 67 mA h/g, a remarkable rate up to 15 A/g, a Coulombic efficiency around 100%, and an ultra-long life of 10,000 cycles. Using the anti-freezing 9 M H3PO4 electrolyte, the PANI-H2 battery can operate well at temperatures down to -70 °C, which maintains ∼70% of the capacity at room temperature and shows an excellent cycle stability under -60 °C. Benefiting from the fast redox kinetics of both electrodes, this work demonstrates excellent rate performance and low-temperature feasibility of conductive polymer-H2 batteries, providing a new avenue for further development of low-cost and reliable polymer-H2 batteries for large-scale energy storage.

Proton-Trapping Agent for Mitigating Hydrogen Evolution Corrosion of Zn for an Electrolytic MnO2/Zn Battery.

A rechargeable aqueous electrolytic MnO2/Zn battery (EMZB) based on a reversible Mn2+/MnO2 two-electron redox reaction in an acidic electrolyte is very attractive for large-scale energy storage due to its high output voltage, large gravimetric capacity, and low cost. However, severe hydrogen evolution corrosion (HEC) of the Zn anode in an acidic electrolyte limits its application. Here, a proton-trapping agent (PTA) is introduced in the electrolyte to improve the electrochemical performance of the EMZB. Experimental results and theoretical calculations demonstrate that HEC of the Zn electrode can be effectively mitigated through high binding energy between the protons and PTA. The optimized EMZB regulated by a PTA of acetate (EMZB-20% Ac) delivers a high discharge voltage of 1.91 V and over 400 stable cycles at 1 C, which is more than 5 times the cycle life of the battery without PTA. EMZB-20% Ac also shows a Coulombic efficiency of 90.7% at a high areal capacity of 8 mAh cm-2 and an energy retention of 83.6% after 1000 cycles at 5 C with an areal capacity of 1 mAh cm-2. This work provides a promising electrolyte regulation strategy for the design and application of a high-performance EMZB and other energy storage systems.

Surface-Oxygen-Rich Bi@C Nanoparticles for High-Efficiency Electroreduction of CO2 to Formate.

The electrochemical CO2 reduction reaction (CO2RR) is a promising strategy to alleviate excessive CO2 levels in the atmosphere and produce value-added feedstocks and fuels. However, the synthesis of high-efficiency and robust electrocatalysts remains a great challenge. This work reports the green preparation of surface-oxygen-rich carbon-nanorod-supported bismuth nanoparticles (SOR Bi@C NPs) for an efficient CO2RR toward formate. The resultant SOR Bi@C NPs catalyst displays a Faradaic efficiency of more than 91% for formate generation over a wide potential range of 440 mV. Ex situ XPS and XANES and in situ Raman spectroscopy demonstrate that the Bi-O/Bi (110) structure in the pristine SOR Bi@C NPs can remain stable during the CO2RR process. DFT calculations reveal that the Bi-O/Bi (110) structure can facilitate the formation of the *OCHO intermediate. This work provides an approach to the development of high-efficiency Bi-based catalysts for the CO2RR and offers a unique insight into the exploration of advanced electrocatalysts.

Descriptor-Driven Computational Design of Bifunctional Double-Atom Hydrogen Evolution and Oxidation Reaction Electrocatalysts for Rechargeable Hydrogen Gas Batteries.

Rechargeable hydrogen gas batteries (RHGBs) have been attracting much attention as promising all-climate large-scale energy storage devices, which calls for low-cost and high-activity hydrogen evolution/oxidation reaction (HER/HOR) bifunctional electrocatalysts to replace the costly platinum-based catalysts. Based on density functional theory (DFT) computations, herein we report an effective descriptor-driven design principle to govern the HER/HOR electrocatalytic activity of double-atom catalysts (DACs) for RHGBs. We systematically investigate the d-band center variation of DACs and their correlations with HER/HOR free energies. We construct activity maps with the d-band center of DACs as a descriptor, which demonstrate that high HER/HOR electrocatalytic activity can be achieved with an appropriate d-band center of DACs. This work not only broadens the applicability of d-band center theory to the prediction of bifunctional HER/HOR electrocatalysts but also paves the way to fast screening and design of efficient and low-cost DACs to promote practical applications of RHGBs.

Theory-Driven Design of a Cationic Accelerator for High-Performance Electrolytic MnO2 -Zn Batteries.

Aqueous electrolytic MnO2 -Zn batteries are considered as one of the most promising energy-storage devices for their cost effectiveness, high output voltage, and safety, but their electrochemical performance is limited by the sluggish kinetics of cathodic MnO2 /Mn2+ and anodic Zn/Zn2+ reactions. To overcome this critical challenge, herein, a cationic accelerator (CA) strategy is proposed based on the prediction of first-principles calculations. Poly(vinylpyrrolidone) is utilized as a model to testify the rational design of the CA strategy. It manifests that the CA effectively facilitates rapid cations migration in electrolyte and adequate charge transfer at electrode-electrolyte interface, benefiting the deposition/dissolution processes of both Mn2+ and Zn2+ cations to simultaneously improve kinetics of cathodic MnO2 /Mn2+ and anodic Zn/Zn2+ reactions. The resulting MnO2 -Zn battery regulated by CA exhibits large reversible capacities of 455 mAh g-1 and 3.64 mAh cm-2 at 20 C, as well as a long lifespan of 2000 cycles with energy density retention of 90%, achieving one of the best overall performances in the electrolytic MnO2 -Zn batteries. This comprehensive work integrating theoretical prediction with experimental studies provides opportunities to the development of high-performance energy-storage devices.

Production of a hybrid capacitive storage device via hydrogen gas and carbon electrodes coupling.

Conventional electric double-layer capacitors are energy storage devices with a high specific power and extended cycle life. However, the low energy content of this class of devices acts as a stumbling block to widespread adoption in the energy storage field. To circumvent the low-energy drawback of electric double-layer capacitors, here we report the assembly and testing of a hybrid device called electrocatalytic hydrogen gas capacitor containing a hydrogen gas negative electrode and a carbon-based positive electrode. This device operates using pH-universal aqueous electrolyte solutions (i.e., from 0 to 14) in a wide temperature range (i.e., from - 70 °C to 60 °C). In particular, we report specific energy and power of 45 Wh kg-1 and 458 W kg-1 (both values based on the electrodes' active materials mass), respectively, at 1 A g-1 and 25 °C with 9 M H3PO4 electrolyte solution. The device also enables capacitance retention of 85% (final capacitance of about 114 F g-1) after 100,000 cycles at 10 A g-1 and 25 °C with 1 M phosphate buffer electrolyte solution.

Facile Fabrication of Bifunctional Hydrogen Catalytic Electrodes for Long-Life Nickel-Hydrogen Gas Batteries.

The renaissance of long-lasting nickel-hydrogen gas (Ni-H2) battery by developing efficient, robust, and affordable hydrogen anode to replace Pt is particularly attractive for large-scale energy storage applications. Here, we demonstrate an extremely facile corrosion induced fabrication approach to achieve a self-supporting hydrogen evolution/oxidation reaction (HER/HOR) bifunctional nanosheet array electrode for Ni-H2 battery. The electrode is constituted by ultrafine Ru nanoparticles on Ni(OH)2 nanosheets grown on nickel foam. Experimental and theoretical calculation results reveal that the electrode with optimized geometric and electronic structures ensures the efficient and robust catalytic hydrogen activities. The fabricated Ni-H2 battery using the Ru-Ni(OH)2/NF anode with an industrial scale areal capacity of 16 mAh cm-2 demonstrates a high energy density, good rate capability and excellent durability without capacity decay over 1800 h. This study casts light on the development of low manufacturing cost and high performance bifunctional hydrogen catalytic electrodes for future hydrogen energy applications.