Calcium Peroxide-Based Hydrogels Enable Biphasic Release of Hydrogen Peroxide for Infected Wound Healing.

Wound infection is a major factor affecting the speed and quality of wound healing. While hydrogen peroxide (H2O2) is recognized for its antibacterial capacity and facilitation of wound healing, its administration requires careful dosage differentiation. Inappropriately matched dosages can protract the healing of infected wounds. Herein, a calcium peroxide-based hydrogel (CPO-Alg hydrogel) is fabricated to enable a biphasic tapered release of H2O2, ensuring robust initial antimicrobial activity followed by sustained promotion of cellular proliferation of wound healing. The design of the hydrogel allowed for the calcium peroxide nanoparticles (CPO NPs) being in two spatial niches within the gel framework. When applied to infectious wounds, CPO NPs with weak constraints are promptly released out of the gel, penetrating into infected regions to serve as antibacterial agents that eliminate bacteria and biofilms at high concentrations. Conversely, the entrapped CPO NPs structurally integrated into the gel remain confined, thus gradually degrading and allowing a mild release of H2O2 through hydrolysis in a moist environment that contributes to the cell growth in the later stage. The CPO-Alg hydrogel represents an innovative and practical solution for the antimicrobial protection of chronic wounds, offering promising prospects for advancing wound healing.

Oral microbiome and its relationship with oral cancer.

ABSTRACT: As the initial point for digestion, the balance of oral microorganisms plays an important role in maintaining local and systemic health. Oral dysbiosis, or an imbalance in the oral microbial community, may lead to the onset of various diseases. The presence or abnormal increase of microbes in the oral cavity has attracted significant attention due to its complicated relationship with oral cancer. Oral cancer can remodel microbial profiles by creating a more beneficial microenvironment for its progression. On the other hand, altered microbial profiles can promote tumorigenesis by evoking a complex inflammatory response and affecting host immunity. This review analyzes the oncogenic potential of oral microbiome alterations as a driver and biomarker. Additionally, a potentially therapeutic strategy via the reversal of the oral microbiome dysbiosis in oral cancers has been discussed.

Bimetallic Nanoplatforms for Prostate Cancer Treatment by Interfering Cellular Communication.

Cellular communication mediated by messenger molecules plays an important role in the progression of cancer. Herein, pH-sensitive zeolitic imidazolate framework-8 (ZIF-8) loaded with PtCl2(OH)2(NH3)2 [i.e., Pt(IV)] bimetallic nanoplatforms were developed for prostate cancer therapy by interfering inositol-1, 4, 5-trisphosphate (IP3)-mediated cellular communication. As an important messenger in cells, the function of IP3 was found to be efficiently interfered with by the Pt(IV)-binding inositol unit. This finding effect of Pt(IV) is totally different from its traditional function as a prodrug of cis-platinum for chemotherapy. The decreased IP3 signal further downregulated the cytoplasmic Ca2+ concentration and downstream signal transduction to inhibit proliferation and invasion of tumor cells. Meanwhile, Zn2+ released from ZIF-8 under an acidic tumor microenvironment decreased adenosine triphosphate biosynthesis, which could further limit the cellular communication. Such a proposed strategy of interfering cellular communication has demonstrated its feasibility in this study, which may provide new perspectives for cancer therapy.

Real-Time pH Sensor in Bacterial Microenvironments Using Liquid Crystal Core-Shell Microspheres.

It is well-known that the bacterial microenvironment imposes restrictions on the growth and behavior of bacteria. The localized monitoring of microenvironmental factors is appreciated when consulting bacterial adaptation and behavior in the presence of chemical or mechanical stimuli. Herein, we developed a novel liquid crystal (LC) biosensor in a microsphere configuration for real-time 3D monitoring of the bacteria microenvironment, which was implemented by a microfluidic chip. As a proof of concept, a LC gel (LC-Gel) microsphere biosensor was prepared and employed in the localized pH changes of bacteria by observing the configuration change of LC under polarized optical microscopy. Briefly, the microsphere biosensor was constructed in core-shell configuration, wherein the core contained LCE7 (a nematic LC) doped with 4-pentylbiphenyl-4'-carboxylic acid (PBA), and the shell encapsulated the bacteria. The protonation of carboxyl functional groups of the PBA induced a change in charge density on the surface of LCE7 and the orientation of E7 molecules, resulting in the transitions of the LC nucleus from axial to bipolar. The developed LC-Gel microspheres pH sensor exhibited its dominant performance on localized pH real-time sensing with a resolution of 0.1. An intriguing observation from the prepared pH biosensor was that the diverse bacteria impelled distinct acidifying or alkalizing effects. Overall, the facile LC-Gel microsphere biosensor not only provides a versatile tool for label-free, localized pH monitoring but also opens avenues for investigating the effects of chemical and mechanical stimuli on cellular metabolism within bacterial microenvironments.

YouTube/ Bilibili/ TikTok videos as sources of medical information on laryngeal carcinoma: cross-sectional content analysis study.

BACKGROUND: YouTube, a widely recognized global video platform, is inaccessible in China, whereas Bilibili and TikTok are popular platforms for long and short videos, respectively. There are many videos related to laryngeal carcinoma on these platforms. This study aims to identify upload sources, contents, and feature information of these videos on YouTube, Bilibili, and TikTok, and further evaluate the video quality. METHODS: On January 1, 2024, we searched the top 100 videos by default sort order (300 videos in total) with the terms "laryngeal carcinoma" and "throat cancer" on YouTube, "" on Bilibili and TikTok. Videos were screened for relevance and similarity. Video characteristics were documented, and quality was assessed by using the Patient Education Materials Assessment Tool (PEMAT), Video Information and Quality Index (VIQI), Global Quality Score (GQS), and modified DISCERN (mDISCERN). RESULTS: The analysis included 99 YouTube videos, 76 from Bilibili, and 73 from TikTok. Median video lengths were 193 s (YouTube), 136 s (Bilibili), and 42 s (TikTok). TikTok videos demonstrated higher audience interaction. Bilibili had the lowest ratio of original contents (69.7%). Treatment was the most popular topic on YouTube and Bilibili, while that was the prognosis on TikTok. Solo narration was the most common video style across all platforms. Video uploaders were predominantly non-profit organizations (YouTube), self-media (Bilibili), and doctors (TikTok), with TikTok authors having the highest certification rate (83.3%). Video quality, assessed using PEMAT, VIQI, GQS, and mDISCERN, varied across platforms, with YouTube generally showing the highest scores. Videos from professional authors performed better than videos from non-professionals based on the GQS and mDISCERN scores. Spearman correlation analysis showed no strong relationships between the video quality and the audience interaction. CONCLUSIONS: Videos on social media platforms can help the public learn about the knowledge of laryngeal cancer to some extent. TikTok achieves the best flow, but videos on YouTube are of the best quality. However, the video quality across all platforms still needs enhancement. We need more professional uploaders to ameliorate the video quality related to laryngeal carcinoma. Content creators also should be aware of the certification, the originality, and the style of video shooting. As for the platforms, refining the algorithm will allow users to receive more high-quality videos.

Design of Ultrasound-Driven Charge Interference Therapy for Wound Infection.

Wound infections, especially those caused by pathogenic bacteria, present a considerable public health concern due to associated complications and poor therapeutic outcomes. Herein, we developed antibacterial nanoparticles, namely, PGTP, by coordinating guanidine derivatives with a porphyrin-based sonosensitizer. The synthesized PGTP nanoparticles, characterized by their strong positive charge, effectively disrupted the bacterial biosynthesis process through charge interference, demonstrating efficacy against both Gram-negative and Gram-positive bacteria. Additionally, PGTP nanoparticles generated reactive oxygen species under ultrasound stimulation, resulting in the disruption of biofilm integrity and efficient elimination of pathogens. RNA-seq analysis unveiled the detailed mechanism of wound healing, revealing that PGTP nanoparticles, when coupled with ultrasound, impair bacterial metabolism by interfering with the synthesis and transcription of amino acids. This study presents a novel approach to combatting wound infections through ultrasound-driven charge-interfering therapy, facilitated by advanced antibacterial nanomaterials.

lincRNA00907 promotes NASH progression by targeting miRNA-942-5p/TAOK1.

OBJECTIVE: The study aims to examine the involvement of lincRNA00907 in the advancement of non-alcoholic steatohepatitis (NASH). METHODS: The examination was conducted to assess the expression of linc00907 in liver tissues from NASH patients and healthy individuals. High-fat diets induced NASH in mouse models, while palmitic acid/oleic acid treatment was used to create in vitro cell models. Various techniques, such as qRT-PCR, Oil Red O staining and gene knockdown/overexpression, were used to assess the impact of linc00907 on genes related to lipid metabolism and immunity, as well as intracellular lipid accumulation. Furthermore, dual-luciferase reporter assays were carried out to confirm the connection between miRNA-942-5p and linc00907 or TAOK1 mRNA. RESULTS: Linc00907 was found to be significantly upregulated in both NASH patients and NASH mouse models. Overexpression of linc00907 led to an increase in intracellular lipid accumulation, while knockdown of linc00907 resulted in decreased lipid content. It was found that miRNA-942-5p binds with linc00907, and their interaction was confirmed in dual-luciferase reporter assays. Additionally, TAOK1 was predicted to be a downstream target of miRNA-942-5p, and the upregulation of TAOK1 due to linc00907 was reversed by miRNA-942-5p overexpression. linc00907 overexpression reduces apoptosis but can be reversed by TAOK1 knockdown. The reduction of TAOK1 counteracted the impact of linc00907 on gene expression associated with lipid metabolism and immunity, as well as on the accumulation of intracellular lipids. CONCLUSIONS: Our research suggests that linc00907 functions as a competitive endogenous RNA (ceRNA) by sequestering miRNA-942-5p, thus increasing the expression of TAOK1 and encouraging lipid accumulation in hepatocytes, leading to the aggravation of NASH development. Targeting the linc00907/miRNA-942-5p/TAOK1 axis may hold therapeutic potential for the treatment of NASH.

One-step biofabrication of liquid core-GelMa shell microbeads for in situ hollow cell ball self-assembly.

There are many instances of hollow-structure morphogenesis in the development of tissues. Thus, the fabrication of hollow structures in a simple, high-throughput and homogeneous manner with proper natural biomaterial combination is valuable for developmental studies and tissue engineering, while it is a significant challenge in biofabrication field. We present a novel method for the fabrication of a hollow cell module using a coaxial co-flow capillary microfluidic device. Sacrificial gelatin laden with cells in the inner layer and GelMa in the outer layer are used via a coaxial co-flow capillary microfluidic device to produce homogenous micro-beads. The overall and core sizes of core-shell microbeads were well controlled. When using human vein vascular endothelial cells to demonstrate how cells line the inner surface of core-shell beads, as the core liquifies, a hollow cell ball with asymmetric features is fabricated. After release from the GelMa shell, individual cell balls are obtained and deformed cell balls can self-recover. This platform paves way for complex hollow tissue modeling in vitro, and further modulation of matrix stiffness, curvature and biochemical composition to mimic in vivo microenvironments.

Neofunctionalization of an OMT cluster dominates polymethoxyflavone biosynthesis associated with the domestication of citrus.

Polymethoxyflavones (PMFs) are a class of abundant specialized metabolites with remarkable anticancer properties in citrus. Multiple methoxy groups in PMFs are derived from methylation modification catalyzed by a series of hydroxylases and O-methyltransferases (OMTs). However, the specific OMTs that catalyze the systematic O-methylation of hydroxyflavones remain largely unknown. Here, we report that PMFs are highly accumulated in wild mandarins and mandarin-derived accessions, while undetectable in early-diverging citrus species and related species. Our results demonstrated that three homologous genes, CreOMT3, CreOMT4, and CreOMT5, are crucial for PMF biosynthesis in citrus, and their encoded methyltransferases exhibit multisite O-methylation activities for hydroxyflavones, producing seven PMFs in vitro and in vivo. Comparative genomic and syntenic analyses indicated that the tandem CreOMT3, CreOMT4, and CreOMT5 may be duplicated from CreOMT6 and contributes to the genetic basis of PMF biosynthesis in the mandarin group through neofunctionalization. We also demonstrated that N17 in CreOMT4 is an essential amino acid residue for C3-, C5-, C6-, and C3'-O-methylation activity and provided a rationale for the functional deficiency of OMT6 to produce PMFs in early-diverging citrus and some domesticated citrus species. A 1,041-bp deletion in the CreOMT4 promoter, which is found in most modern cultivated mandarins, has reduced the PMF content relative to that in wild and early-admixture mandarins. This study provides a framework for reconstructing PMF biosynthetic pathways, which may facilitate the breeding of citrus fruits with enhanced health benefits.

Research on molecular dynamics and electrical properties of high heat-resistant epoxy resins.

In order to prepare highly heat-resistant packaging insulation materials, in this paper, bismaleimide/epoxy resin (BMI/EP55) composites with different contents of BMI were prepared by melt blending BMI into amino tetrafunctional and phenolic epoxy resin (at a ratio of 5:5). The microstructures and thermal and electrical properties of the composites were tested. The electrostatic potential distribution, energy level distribution, and molecular orbitals of BMI were calculated using Gaussian. The results showed that the carbonyl group in BMI is highly electronegative, implying that the carbonyl group has a strong electron trapping ability. The thermal decomposition temperature of the composites gradually increased with the increase of BMI content, and the 20% BMI/EP55 composites had the highest heat-resistance index, along with a glass transition temperature (Tg) of >250 °C. At different test temperatures, with increase in the BMI content, the conductivity of epoxy resin composites showed a tendency to first decrease and then increase, the breakdown field strength showed a tendency to first increase and then decrease, and the dielectric constant was gradually decreased. Two trap centers were present simultaneously in the composites, where the shallow trap energy level is the deepest in 20% BMI/EP composites and the deep trap energy level is the deepest in 10% BMI/EP55 composites. Correspondingly, the 10% BMI/EP55 composite had a slower charge decay rate, while the 20% BMI/EP55 had a faster charge decay rate. In summary, the BMI/EP55 composites with high heat resistance and insulating properties were prepared in this study, which provided ideas for preparing high-temperature packaging insulating materials.

Ginkgolic acid inhibits the expression of SAE1 and induces ferroptosis to exert an anti-hepatic fibrosis effect.

BACKGROUND: Finding a drug for early intervention in the hepatic fibrosis process has important clinical significance. Previous studies have suggested SUMOylation as a potential target for intervention in hepatic fibrosis. However, the role of SAE1, a marker of SUMOylation, in hepatic fibrosis is unknown. Additionally, whether ginkgolic acid (GA), a SUMOylation inhibitor, inhibits hepatic fibrosis by inhibiting SUMO1-activating enzyme subunit 1 (SAE1) should be further investigated. METHODS: Liver tissues of patients with hepatic cirrhosis and a rat model of hepatic fibrosis constructed with CCl4 (400 mg/kg, twice weekly) or TAA (200 mg/kg, twice weekly) were selected, and the degree of hepatic fibrosis was then evaluated using H&E, Sirius red, and Masson's trichrome staining. After knockdown or overexpression of SAE1 in hepatic stellate cells, the expression levels of ferroptosis and hepatic fibrosis markers were measured in vitro. After intervention with a ferroptosis inhibitor, the expression levels were again measured in vivo and in vitro. RESULTS: We first demonstrated that SAE1 increased in patients with hepatic cirrhosis. Subsequently, testing of the rat hepatic fibrosis model confirmed that GA reduced the expression of SAE1 and improved hepatic fibrosis in rats. Then, we used hepatic stellate cell lines to confirm in vitro that GA inhibited SAE1 expression and induced ferroptosis, and that overexpression of SAE1 or inhibition of ferroptosis reversed this process. Finally, we confirmed in vivo that GA induced ferroptosis and alleviated the progression of hepatic fibrosis, while inhibiting ferroptosis also reversed the progression of hepatic fibrosis in rats. CONCLUSION: SAE1 is a potential anti-fibrotic target protein, and GA induces ferroptosis of hepatic stellate cells by targeting SAE1 to exert an anti-hepatic fibrosis effect, which lays an experimental foundation for the future clinical application of its anti-hepatic fibrosis effect.

Accumulation characteristics of liquid crystal monomers in plants: A multidimensional analysis.

Liquid crystal monomers (LCMs), identified as emerging contaminations, have been detected in soils and plants, but their accumulation characteristics in plants haven't been studied. Therefore, this study systematically investigated the accumulation characteristics of LCMs in plants from four dimensions (i.e., plant fruit species, soil types, plant growth stages, and LCMs categories) for the first time. The LCMs concentrations (9.96 × 10-4 to 114.608 ng/g) in 22 plant fruits were predicted by the partition-limited model. Grains with the highest lipid content showed the highest LCMs accumulation propensity. Plants grown in paddy soil showed a strong LCMs accumulation capacity. Results showed that the LCMs accumulation capacity in plants from soils decreased when the soil organic matter content increased. A preferential accumulation of LCMs in plant root systems during growth was found by the molecular dynamics simulations. Compared to polychlorinated biphenyls (as the reference contaminants of LCMs), LCMs exhibit higher accumulation in plant roots and lower translocation to shoots. For the fourth dimension, lipophilicity was found to be the main reason of LCMs accumulation by intergraded stepwise linear regression with sensitivity analysis. This is the inaugural research concentrating on LCMs accumulation in plants, providing insights and theoretical guidance for future LCMs management strategies multidimensionally.

Precise Engineering of Growth Factor Presentation Using Extracellular Microenvironment-Mimicking Microfluidic Microparticles.

One of the main challenges in tissue engineering is finding a way to deliver specific growth factors (GFs) with precise spatiotemporal control over their presentation. Here, we report a novel strategy for generating microscale carriers with enhanced affinity for high content loading suitable for the sustained and localized delivery of GFs. Our developed microparticles can be injected locally and sustainably release encapsulated growth factors for up to 28 days. Fine-tuning of particles' size, affinity, microstructures, and release kinetics is achieved using a microfluidic system along with bioconjugation techniques. We also describe an innovative 3D micromixer platform to control the formation of core-shell particles based on superaffinity using a polymer-peptide conjugate for further tuning of release kinetics and delayed degradation. Chitosan shells block the burst release of encapsulated GFs and enable their sustained delivery for up to 10 days. The matched release profiles and degradation provide the local tissues with biomimetic, developmental-biologic-compatible signals to maximize regenerative effects. The versatility of this approach is verified using three different therapeutic proteins, including human bone morphogenetic protein-2 (rhBMP-2), vascular endothelial growth factor (VEGF), and stromal cell-derived factor 1 (SDF-1α). As in vivo morphogenesis is typically driven by the combined action of several growth factors, the proposed technique can be developed to generate a library of GF-loaded particles with designated release profiles.

Substrate stiffness can affect the crosstalk between adipose derived mesenchymal stem cells and macrophages in bone tissue engineering.

Purpose: This study aimed to explore the effect of biomaterials with different stiffness on Adipose Derived Mesenchymal Stem Cells (ADSC)-macrophage crosstalk in bone tissue engineering and its role in bone repair. Methods: Biomaterials with Young's modulus of 64 and 0.2 kPa were selected, and the crosstalk between ADSCs and macrophages was investigated by means of conditioned medium treatment and cell co-culture, respectively. Polymerase chain reaction (PCR) and flow cytometry were used to evaluate the polarization of macrophages. Alkaline phosphatase (ALP) and alizarin red staining (ARS) solutions were used to evaluate the osteogenic differentiation of ADSCs. Transwell assay was used to evaluate the chemotaxis of ADSCs and macrophages. Moreover, mass spectrometry proteomics was used to analyze the secreted protein profile of ADSCs of different substrates and macrophages in different polarization states. Results: On exploring the influence of biomaterials on macrophages from ADSCs on different substrates, we found that CD163 and CD206 expression levels in macrophages were significantly higher in the 64-kPa group than in the 0.2-kPa group in conditioned medium treatment and cell co-culture. Flow cytometry showed that more cells became CD163+ or CD206+ cells in the 64-kPa group under conditioned medium treatment or cell co-culture. The Transwell assay showed that more macrophages migrated to the lower chamber in the 64-kPa group. The proteomic analysis found that ADSCs in the 64-kPa group secreted more immunomodulatory proteins, such as LBP and RBP4, to improve the repair microenvironment. On exploring the influence of biomaterials on ADSCs from macrophages in different polarization states, we found that ALP and ARS levels in ADSCs were significantly higher in the M2 group than in the other three groups (NC, M0, and M1 groups) in both conditioned medium treatment and cell co-culture. The Transwell assay showed that more ADSCs migrated to the lower chamber in the M2 group. The proteomic analysis found that M2 macrophages secreted more extracellular remodeling proteins, such as LRP1, to promote bone repair. Conclusion: In bone tissue engineering, the stiffness of repair biomaterials can affect the crosstalk between ADSCs and macrophages, thereby regulating local repair immunity and affecting bone repair.

Discovery of CTSK+ Periosteal Stem Cells Mediating Bone Repair in Orbital Reconstruction.

Purpose: The purpose of this study was to explore the role of cathepsin K positive (CTSK+) periosteal stem cells (PSCs) in orbital bone repair and to clarify the source of endogenous stem cells for orbital bone self-repair. Methods: Periosteum samples obtained by clinical orbital bone repair surgery were analyzed, after which immunofluorescence and immunohistochemical staining were used to detect the content of bone marrow-derived cells and CTSK+ PSCs in periosteum as well as the mobilization of PSCs. CTSK+ PSCs were characterized by flow cytometry. Transcriptome sequencing was used to compare the transcriptomic characteristics of CTSK+ PSCs and bone marrow mesenchymal stem cells (BMSCs). Results: The orbital periosteum contained CTSK+CD200+ cell lineage, including CD200+CD105- PSCs and CD200+CD105+ progenitor cells. CTSK and osteocalcin (OCN) colocalized in the inner layer of the orbital periosteum, suggesting the osteogenic differentiation potential of CTSK+ PSCs. CTSK expression was much higher in periosteum after mobilization. Immunofluorescence showed low amounts of scattered CD31+ and CD45+ cells in the orbital periosteum. The stem cell characteristics of CTSK+ PSCs were verified by multidirectional differentiation. Flow cytometry found CD200+CD105- CTSK+ PSCs and CD200variantCD105+ progenitor cells. Transcriptome sequencing of CTSK+ PSCs and BMSCs found 3613 differential genes with significant differences. Gene Ontology (GO) analysis showed the differences between the two types of stem cells, revealing that PSCs were more suitable for intramembranous osteogenesis. Conclusions: CTSK+ PSCs may be endogenous stem cells for orbital bone repair. They are mobilized after orbital fracture and have unique features suitable for intramembranous osteogenesis, completely different from BMSCs.

Determination of A1 and A2 ß-Casein in Milk Using Characteristic Thermolytic Peptides via Liquid Chromatography-Mass Spectrometry.

ß-casein, a protein in milk and dairy products, has two main variant forms termed as A1 and A2. A1 ß-casein may have adverse effects on humans. The fact that there is only one amino acid variation at the 67th position between A1 and A2 ß-casein makes it difficult to distinguish between them. In this study, a novel method using characteristic thermolytic peptides is developed for the determination of A1 and A2 ß-casein in milk. Firstly, caseins extracted from milk samples are thermolytic digested at 60 °C without any denaturing reagents required for unfolding proteins, which simplifies the sample pretreatment procedure. The characteristic thermolytic peptides (i.e., fragments 66-76 and 59-76 for A1 and A2 ß-casein, respectively) selected to specifically distinguish A1 and A2 ß-casein only have eleven or eighteen amino acid moieties. Compared with tryptic characteristic peptides with a length of 49 amino acid moieties, these shorter thermolytic characteristic peptides are more suitable for LC-MS analysis. This novel method, with the advantages of high specificity, high sensitivity, and high efficiency, was successfully applied for the analysis of six milk samples collected from a local supermarket. After further investigation, it is found that this method would contribute to the development of A2 dairy products for a company and the quality inspection of A2 dairy products for a government.

Performance of eye sign combined with increased interleukin-6 in cerebrospinal fluid in patients with neuropsychiatric lupus erythematosus.

OBJECTIVES: To ascertain whether microvascular alterations of eye sign combined with intrathecal concentrations of interleukin-6 (IL-6) can predict the development of neuropsychiatric systemic lupus erythematosus (NPSLE). METHODS: Cerebrospinal fluid (CSF) and serum samples of IL-6 were collected and measured at the same time for patients with SLE who were consecutively enrolled. Patients with a diagnosis of NPSLE were identified. Eye sign examinations according to our criteria were performed and scored for all SLE patients. Demographic and clinical parameters were compared between groups to identify potential predictors for NPSLE using multivariable logistic regression analysis. The performance of potential predictors from eye sign along with IL-6 in the CSF was assessed. RESULTS: A total of 120 patients with SLE were enrolled; 30 with NPSLE and 90 with non-NPSLE. No significant positive correlation was observed between CSF level and serum level of IL-6. CSF IL-6 was significant higher in the NPSLE group than the non-NPSLE (P < 0.001) group. Multivariable logistic analysis revealed that total score, ramified loops, and microangioma of eye sign were predictors for NPSLE after adjusting for SLE Disease Activity Index (SLEDAI) and antiphospholipid antibody (APL). Total score, ramified loops, microangioma of eye sign, and SLEDAI remain significant predictors for NPSLE after adjusting for CSF IL-6. Using receiver operating characteristics curve analysis, the cut-off point of potential predictors was applied in multivariable logistic analysis; APL, total score, ramified loops, and microangioma of eye sign remain significant predictors for NPSLE after adjusting for CSF IL-6. CONCLUSION: Specific microvascular alterations of eye sign are predictors for the development of NPSLE in addition to increased IL-6 in the CSF.

Molecular design of environment-friendly chlorophenol (CP) derivatives based on 3D-QSAR assisted with a comprehensive evaluation method combining bioaccumulation and degradation.

In this study, a chlorophenol (CP) 3D-QSAR model with a double activity (bioaccumulation and degradation) combination was established. 19 CPs were divided into a training set and test set according to the ratio of 4:1. The cross-validation coefficient (q2) and non-cross-validation coefficient (R2) of the model were 0.803 (> 0.5) and 0.925 (> 0.9), respectively, indicating a good stability and predictive ability of the 3D-QSAR. 2,4,6-trichlorophenol (2,4,6-TCP) was used as a target molecule, and 46 derivatives with low comprehensive effects were designed. Out of the 46 derivatives, 11 derivatives were screened to have the good insecticidal and preservative properties. From the perspective of the toxicity of zebrafish, 4 out of the 11 derivatives were found to have lower aquatic toxicity effects. Through the food chain simulation of cyanobacteria-daphnia-swamp-mandarin fish, it was found that the bioaccumulation effect of the four derivatives was lower than that of 2,4, 6-TCP. Finally, molecular dynamics simulation was conducted using 2-CH2NH2 substituted derivatives, and it was found that the degradation effect by laccase (white rot fungi) was significantly improved in the presence of violuric acid, hydroxybenzotriazole, and syringaldehyde. This study can provide theoretical support for the development of environment-friendly technology for emerging pollutants.

Enhancement of Energy Storage Performance of PMMA/PVDF Composites by Changing the Crystalline Phase through Heat Treatment.

In today's contemporary civilization, there is a growing need for clean energy focused on preserving the environment; thus, dielectric capacitors are crucial equipment in energy conversion. On the other hand, the energy storage performance of commercial BOPP (Biaxially Oriented Polypropylene) dielectric capacitors is relatively poor; hence, enhancing their performance has drawn the attention of an increasing number of researchers. This study used heat treatment to boost the performance of the composite made from PMAA and PVDF, combined in various ratios with good compatibility. The impacts of varying percentages of PMMA-doped PMMA/PVDF mixes and heat treatment at varying temperatures were systematically explored for their influence on the attributes of the blends. After some time, the blended composite's breakdown strength improves from 389 kV/mm to 729.42 kV/mm at a processing temperature of 120 °C. Consequently, the energy storage density is 21.12 J/cm3, and the discharge efficiency is 64.8%. The performance has been significantly enhanced compared to PVDF in its purest state. This work offers a helpful technique for designing polymers that perform well as energy storage materials.

An Innovative method for intraoperative guidance of nasal shape in rhinoplasty: Application of a convenient, sterilizable, patient-specific film model.

BACKGROUNDS: 3D simulation is increasingly used in rhinoplasty. However, during the operation, there is no tool to directly link the 3D simulation results with the intraoperative operation. Doctors rely on 3D simulation results only according to their intuition. Recently, the authors have discovered a simple, low-cost, and practical method for intraoperative assessment: a film model can be made according to the contour of the nose shape in its midsagittal view. The authors aimed to evaluate the effectiveness of the innovative method for intraoperative assessment of nasal shape in rhinoplasty. METHODS: Thirty-nine patients who underwent rhinoplasty for the first time between January 2019 and January 2021 were included in this study. All the patients confirmed ideal nasal shape based on preoperative three-dimensional photography (INOVA 3D-EX). In the guide group, procedures were based on guide of the film model and a picture of 3D simulation, and in the control group, procedures were performed based on the surgeon's intuition and a picture of 3D simulation. RESULTS: There were no statistical differences in basic data between the two groups before operation. Both groups showed a satisfactory correlation. Except for the columellar lobular angle, the ICC of nasal length, nasal depth, dorsum height, columella length, nasofrontal angle, nasorostral angle, and nasolabial angle were all stronger in the guide group than in the control group. CONCLUSION: This study demonstrates the usefulness of the nasal-shaped film model, which is made according to the contour of the nose shape in its midsagittal view. This approach is simple, low-cost, and practical.