Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 20 de 49
Filter
1.
Article in Chinese | WPRIM (Western Pacific) | ID: wpr-1009227

ABSTRACT

OBJECTIVE@#To investigate the feasibility of mimics software in analyzing a new type of complex anterior cervical fixation -- anterior transpedicular screw fixation+zero notch internal fixation.@*METHODS@#From January 2021 to September 2022, 50 normal pedestrians who underwent cervical spine CT scanning were selected for C1-C7 segment scanning, including 27 males and 23 females, aged from 25 to 65 years old with an average of (46.0 ± 9.0) years old. The dicom format is exported and engraved into the CD, and use the mimics software to perform 3D reconstruction of each segment. A simulated screw is placed on the image according to the critical value of zero notch screw (head and tail angle 44°, internal angle 29°). The position of zero notch screw in each segment is observed to determine the feasibility of anterior transpedicular screw fixation plus zero notch internal fixation.@*RESULTS@#For the upper zero notch screws the three-dimensional images of the cervical spine across all 50 subjects within the C3-C7 segments demonstrated safe position, with no instances of intersection with ATPS. For the lower zero notch screw, in C3-C4 and C4-C5, 4 out of 50 subjects are in the safe position in the three-dimensional images of cervical vertebrae, and 46 cases could achieve secure screw placement when the maximum caudal angle is(32.3±1.9) ° and (36.1±2.2) °, respectively. In C5-C6 and C6-C7 segments, no lower zero notch screws intersected with ATPS, and all screws are in safe positions.@*CONCLUSION@#Lower cervical anterior pedicle screw fixation plus zero notch internal fixation can achieve successful nail placement through the selected entry point and position.


Subject(s)
Male , Female , Humans , Adult , Middle Aged , Aged , Feasibility Studies , Tomography, X-Ray Computed/methods , Pedicle Screws , Fracture Fixation, Internal , Cervical Vertebrae/surgery , Software
2.
J Endocrinol Invest ; 46(4): 749-761, 2023 Apr.
Article in English | MEDLINE | ID: mdl-36224454

ABSTRACT

BACKGROUND: Papillary thyroid cancer (PTC) is life-threatening due to its malignant progression. Considerable evidence demonstrates that circular RNA (circRNA) regulates PTC development. This study aims to explore the mechanism of circ_0000644 modulating PTC malignant progression. METHODS: The RNA levels of circ_0000644, microRNA-671-5p (miR-671-5p) and annexin A2 (ANXA2) were detected by quantitative real-time polymerase chain reaction. Western blot was performed to check protein expression. Cell proliferation and cell apoptosis were investigated by 5-ethynyl-29-deoxyuridine and flow cytometry. Angiogenic capacity, migration and invasion were analyzed by tube formation assay and transwell assay. The interaction between miR-671-5p and circ_0000644 or ANXA2 was identified by dual-luciferase reporter assay. Xenograft mouse model assay was performed to analyze the effect of circ_0000644 on tumor formation in vivo. RESULTS: Circ_0000644 and ANXA2 expression was significantly upregulated, while miR-671-5p was downregulated in PTC tissues and cells when compared with control groups. Circ_0000644 knockdown inhibited PTC cell proliferation, tube formation, migration, and invasion, but induced apoptosis in vitro. Moreover, circ_0000644 knockdown led to delayed tumorigenesis in vivo. In addition, circ_0000644 acted as a miR-671-5p sponge and mediated PTC cell tumor properties through miR-671-5p. ANXA2 was identified as a target gene of miR-671-5p, and its overexpression relieved miR-671-5p-induced effects in PTC cells. Furthermore, circ_0000644 depletion inhibited ANXA2 production by combining with miR-671-5p. CONCLUSION: Circ_0000644 depletion repressed PTC cell tumor properties through the miR-671-5p/ANXA2 axis.


Subject(s)
Annexin A2 , MicroRNAs , Thyroid Neoplasms , Humans , Animals , Mice , Thyroid Cancer, Papillary/genetics , Annexin A2/genetics , Carcinogenesis , Cell Proliferation , Disease Models, Animal , Thyroid Neoplasms/genetics , MicroRNAs/genetics , Cell Line, Tumor
3.
Article in Chinese | WPRIM (Western Pacific) | ID: wpr-928291

ABSTRACT

OBJECTIVE@#To establish the fixation model of anterior cervical transpedicular system (ACTPS) after subtotal resection of two segments of lower cervical spine(C3-C7) in order to provide a finite element modeling method for anterior cervical reconstruction.@*METHODS@#The CT data of the cervical segment (C1-T1) of a 30-year-old adult healthy male volunteer was collected. Used Mimics 10.0, Rapidform XOR3, HyperMesh 10.0, CATIA5V19 and ANSYS 14.0 to establish the three-dimensional nonlinear complete model of lower cervical spine(C3-C7) as the intact group. The number of units and nodes of the complete model were recorded. After the effectiveness of the complete model was verified, the C5 and C6 vertebral subtotal resection was performed, and the ACTPS model was established as the ACTPS group. The axial force of 75 N and moment couple of 1N·m was loaded on the upper surface of C3 in intact group and ACTPS group, the range of motion(ROM)and stress distribution in states of flexion extension, lateral flexion, rotation was compared between two groups.@*RESULTS@#There were 85 832 elements and 23 612 nodes in the complete model of lower cervical spine(C3-C7) which was established in this experiment. The stress distribution of ACTPS internal fixation model was relatively uniform. Comparing with the intact group, the overall range of motion in ACTPS group was decreased in flexion extension, lateral flexion and rotation directions, and the corresponding compensation of adjacent C3,4 segment was increased slightly.@*CONCLUSION@#The stress distribution of ACTPS fixation system is uniform, there is no stress concentration area at the joint of screw and titanium plate, and the fracture risk of internal fixation is low. It is suitable for stability reconstruction after anterior decompression of two or more cervical segments.


Subject(s)
Adult , Humans , Male , Biomechanical Phenomena , Bone Screws , Cervical Vertebrae/surgery , Finite Element Analysis , Range of Motion, Articular , Spinal Fusion
4.
Medicine (Baltimore) ; 100(6): e24658, 2021 Feb 12.
Article in English | MEDLINE | ID: mdl-33578595

ABSTRACT

BACKGROUND: Previous studies have showed that red cell distribution width (RDW) may be an inflammatory status, and it may be used to predict prognosis of acute pancreatitis (AP). However, there are no systematic reviews for the evidence, and the association between RDW and AP is still not completely understood. Therefore, we will undertake a systematic review of the literature to summarize previous evidence regarding this topic, in order to clarify the value of RDW predicting prognosis of patients with AP. METHODS: We will search EMBASE, Web of Knowledge, PubMed, ClinicalTrials.gov and Cochrane Library from their inception to Mar 2021 to retrieve relevant studies. Two authors independently judged study eligibility and extracted data. Heterogeneity will be examined by computing the Q statistic and I2 statistic. RESULTS: This study proved the Efficiency of RDW in predicting mortality and severity of patients with AP. And provided easy method for clinical evaluation for AP patients. CONCLUSIONS: The findings of this systematic review will show the value of RDW predicting prognosis of patients with AP. ETHICS AND DISSEMINATION: Ethical approval is unnecessary as this protocol is only for systematic review and does not involve privacy data. The findings of this study will be disseminated electronically through a peer-review publication or presented at a relevant conference.


Subject(s)
Erythrocyte Indices/physiology , Pancreatitis/blood , Pancreatitis/mortality , Adult , Clinical Trials as Topic , Humans , Prognosis , Research Design , Severity of Illness Index , Meta-Analysis as Topic
5.
Article in Chinese | WPRIM (Western Pacific) | ID: wpr-879404

ABSTRACT

OBJECTIVE@#To compare accuracy of anterior cervical pedicle screws between assist of rapid prototyping 3D guide plate and free-hand insertion, and evaluate the safety of two methods.@*METHODS@#Eight adult cervical cadaver specimens after formaldehyde immersion, including 4 males and 4 females, aged 32 to 65(40.3±5.6) years old. After X-ray examination to exclude bone damage and deformity, 4 of them (3D guide plate group) randomly selected were for CT scan to obtain DICOM format data, and the data was imported into Mimics software for model, designed the ideal entry point and nail path for anterior cervicaltranspedicular screw (ATPS). After obtaining the personalized guide plate of the nail channel, it was exported as STL data, and the individual guide plate was printed by rapid prototyping and 3D printing technology. In turn, with the assistance of 3D guide plates, one-to-one personalized ATPS screws were placed on the four lower cervical cadaver specimens. Another 4 (free-hand group) lower cervical cadaver specimens were implanted with ATPS screws using free-hand technique. All specimens were performed CT thin-layer scanning and three-dimensional reconstruction after operation. The Tomasino method was used to evaluate the safety of the screws on the CT cross-sectional and sagittal images, to determine whether there was a cortical puncture of the lower and inner edges of the pedicle. According to the CT rating results, gradeⅠandⅡwere safe, and grade Ⅲ- Ⅴ were dangerous.And the accuracy of screws was recorded and analyzed between two groups.@*RESULTS@#Two screws were inserted in each segment from C@*CONCLUSION@#The 3D printing rapid prototyping guide plate assisted insertion of the anterior cervical pedicle screw can significantly improve the accuracy and safety, and provide a theoretical basis for further clinical application.


Subject(s)
Adult , Aged , Female , Humans , Male , Middle Aged , Bone Plates , Cervical Vertebrae/surgery , Cross-Sectional Studies , Pedicle Screws , Printing, Three-Dimensional
7.
Article in Chinese | WPRIM (Western Pacific) | ID: wpr-792982

ABSTRACT

OBJECTIVE@#To investigate the influence of posterior osteotomy on spinopelvic parameters in lumbar degenerative kyphosis (LDK) patients.@*METHODS@#The clinical data of 21 patients with lumbar degenerative kyphosis who underwent osteotomy from January 2012 to December 2015 were retrospectively analyzed. There were 5 males and 16 females, aged from 55 to 76 years with an average of (66.24±5.13) years. All patients had taken preoperative and postoperative full length spinal X-ray, analyzing the spinopelvic parameters as thoracic kyphosis (TK), lumbar lordosis (LL), sagittal vertical axis (SVA), pelvic incidence (PI), pelvic tilt (PT) and sacral slope (SS).@*RESULTS@#All operations were successful, the average operative time was 190 min (160 to 220 min) and intraoperative blood loss was 1 000 ml (800 to 1900 ml). Parameters of the patients between preoperative and period 1-year follow-up were as follows : preoperative TK increased from (31.67±21.13) ° to (34.67±11.60) °, LL corrected from (4.76±3.17) ° to (37.41±6.28) °, PT reduced from (33.94±5.01) ° to (20.12±5.36) °, and SS improved from (18.47±2.60) ° to (31.71±4.30) °, SVA restored from (13.24±3.60) cm to (2.82±1.33) cm. There were significant differences of spinopelvic parameters between preoperation and postoperation (<0.05).@*CONCLUSION@#Posterior osteotomy can effectively reconstruct the sagittal balance of spinopelvis in patients with lumbar degenerative kyphosis. The recovery of lumbar lordosis and sacral slope is closely related to the reconstruction of sagittal balance.

9.
Resuscitation ; 141: 151-157, 2019 08.
Article in English | MEDLINE | ID: mdl-31238036

ABSTRACT

BACKGROUND: The associations between thoracic cage dimension, chest subcutaneous adipose tissue (SAT) depth and outcomes of adults with in-hospital cardiac arrest (IHCA) remain unknown. METHODS: We retrospectively evaluated IHCA patients between January 2016 and October 2017. The thoracic cage transverse diameter, internal AP diameter, cross-sectional area, anterior and posterior SAT depths were measured in computed-tomography (CT) images. Using logistic regression models, we determined the adjusted associations between thoracic cage dimension, SAT depths and the prognosis for IHCA. The primary outcome was sustained return of spontaneous circulation (ROSC) and the secondary outcome was survival to hospital discharge. RESULTS: Among 423 IHCA patients, 258 patients achieved ROSC and 70 survived to discharge. Smaller cross-sectional area and posterior SAT depth were significantly related to ROSC. Smaller posterior SAT depth was associated with ROSC. After multivariate adjustment, the smaller cross-sectional area was independently associated with ROSC (Odds ratio [OR] 0.99, 95% confidence interval [95%CI] 0.99-1.00; p = 0.008) and survival to discharge (OR 0.99, 95%CI 0.98-1.00; p = 0.024), and the smaller posterior SAT depth was independently related to ROSC (OR 0.65, 95%CI 0.44-0.96; p = 0.030), whereas no relation to survival to discharge was found. CONCLUSIONS: In adults with IHCA, the smaller thoracic cage dimension and posterior SAT depth are associated with better survival. An adjustable compression depth based on the thoracic cage dimension might be better than the "one-size-fits-all" compression depth for resuscitating CA patients. In addition, physicians should pay extra attention to compression efficacy when resuscitating obese patients.


Subject(s)
Heart Arrest/therapy , Subcutaneous Fat/anatomy & histology , Thorax/anatomy & histology , Adult , Aged , Aged, 80 and over , Female , Hospitalization , Humans , Male , Middle Aged , Organ Size , Resuscitation , Retrospective Studies , Subcutaneous Fat/diagnostic imaging , Thorax/diagnostic imaging , Tomography, X-Ray Computed , Treatment Outcome
12.
Article in Chinese | WPRIM (Western Pacific) | ID: wpr-773885

ABSTRACT

OBJECTIVE@#The 3D model of lumbar spine was established by using Mimics software. To observe the applicability and needling parameters of lumbar vertebral kyphoplasty with unilateral puncture by backward rotation method using simulated puncture.@*METHODS@#Twenty-four patients (12 males and 12 females) with osteoporotic thoracic fracture in the first time and no signs of lumbar misalignment and bone destruction were scanned by spiral CT on the lumbar spine. The original DICOM file was modeled in 3D with Mimics software, and the vertebral bodies were separated. After being imported into 3-matic software, the posterior wall of the vertebral body was restrained for standardized measurement. A sketch perpendicular to the mid-section of the pedicle and the posterior wall of the vertebral body was drawn. The simulated puncture was performed on the sketch. The angle and distance parameters of the range of motion of the puncture needle were recorded, and the puncture needle was recorded at the top. The crossing points of the anterior, middle and posterior zones of the tangential line of the vertebral body were located at the high extraversion angle, and the results were compared and analyzed.@*RESULTS@#All the data in the left and right sides had no significantly differences(>0.05). Data of different segments in different gender were significantly differences(<0.05). The maximal extraversion angle in lumbar spine increased gradually from (33.41±1.31) degree to (56.53±4.71) degree in males, as same as in females from(28.58±2.55) to (53.86±2.68) degree. There was no crossing point in area A, 3.3% of males and 26.67% of females in area B, rest in area C. The distribution areas on gender showed statistically significance (<0.05).@*CONCLUSIONS@#Backward rotation method can theoretically meet the requirements of puncture point for vertebral compression fracture, especially for males and lower lumbar spine. The determination of the maximum inclination angle is of guiding significance to the backward rotation method.


Subject(s)
Female , Humans , Male , Fractures, Compression , Kyphoplasty , Lumbar Vertebrae , Osteoporotic Fractures , Punctures , Rotation , Spinal Fractures , Thoracic Vertebrae , Treatment Outcome
13.
Article in Chinese | WPRIM (Western Pacific) | ID: wpr-773864

ABSTRACT

OBJECTIVE@#To explore the efficacy of bilateral sagittal cross percutaneous kyphoplasty(PKP) for preventing recurrent fracture of the cemented vertebrae.@*METHODS@#From January 2017 to June 2017, 85 patients with single-segment osteoporotic vertebral compression fractures(OVCFs) were treated by bilateral sagittal cross PKP(cross group). There were 35 males and 50 females with an average age of (70.1±8.3) years old in cross group. Another 85 patients with single-segment OVCFs were treated by traditional PKP (traditional group). There were 37 males and 48 females with an average age of (73.3±9.5) years old in traditional group. The cement distribution condition, recurrent fracture of the cemented vertebrae, the anterior vertebral body height and sagittal Cobb angle, visual analogue scale(VAS) were observed in two groups.@*RESULTS@#All patients underwent operation successfully. The follow-up time were (11.8±4.5) months in cross group and (12.1±3.7) months in traditional group. In cross group, all patients' bone cement touched the upper and lower endplates of the vertebral body while 67 cases (78.8%) in traditional group did with significant difference between two groups (0.05).@*CONCLUSIONS@#Bilateral sagittal cross PKP was a simple, safe and effective technique which can make bone cement distribute in the fractured vertebral body and contact the upper and lower endplates of the vertebral body, thus preventing the recurrent fracture of the cemented vertebrae.


Subject(s)
Aged , Aged, 80 and over , Female , Humans , Male , Middle Aged , Fractures, Compression , Kyphoplasty , Osteoporotic Fractures , Spinal Fractures , Treatment Outcome , Vertebroplasty
15.
Article in Chinese | WPRIM (Western Pacific) | ID: wpr-259781

ABSTRACT

Instability of the cervical spine disease requires surgery to restore stability. In the past, surgical methods were divided into two kinds of anterior and posterior. But each has its own disadvantages:anterior vertebral screw has a higher failure rate, sometimes need a second operation; and posterior pedicle screw, lateral mass screw and facet joint screw may make greater trauma, lead to longer hospitalization. For general instable cervical spine disease, according to the location of the disease, only with the anterior or posterior approach can achieve a stable effect. However, it often fails to achieve the desired stability with only anterior or posterior approach for the three column injury of single segment, the disease need for multi-segment corpectomy and discectomy. Meanwhile, combined with the anterior and posterior have more obvious disadvantages:such as prolonged operation time, greater surgical injury, increased risk of infection and so on.In recent years, anterior transpedicular screw (ATPS) as a new technique was used for cervical spine fixation. Its laboratory and clinical studies have been conducted about biomechanical properties, morphological feasibility, pull-out strength, radiological features and new technology for inserting screws. Because of its strong stability, perfect mechanical properties and the satisfactory results of patients, which has been recognized by many scholars. Although this technique has been used in clinical practice, Its long-term clinical effect needs to be further clarified. Even so, the innovative proposal will provide a new thread for the majority of doctors and colleagues in treating unstable cervical disease.

16.
Cell Physiol Biochem ; 43(5): 2037-2046, 2017.
Article in English | MEDLINE | ID: mdl-29059670

ABSTRACT

BACKGROUND/AIMS: CRIP1 (cysteine-rich intestinal protein 1) has been found in several tumor types; however, its prognostic impact and role in cellular processes, particularly in thyroid carcinoma, are still unclear. METHODS: To elucidate the prognostic impact of CRIP1, we analyzed tissues from 58 primary invasive thyroid carcinomas using immunohistochemistry. Western blotting was performed to investigate CRIP1 protein expression in the thyrocyte cell line Nthy-ori 3-1 and four different thyroid carcinoma cell lines, K1, TPC-1, TT, and SW579. Endogenous expression of CRIP1 was suppressed using a siRNA (si-CRIP1). The 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay was used to investigate cell viability. Flow cytometric analysis was used to detect cell cycle progression and cell apoptosis. The effects of silencing CRIP1 on cell migration and invasion were detected using the transwell assay. RESULTS: The immunohistochemistry results showed that CRIP1 was overexpressed in thyroid carcinoma. CRIP1 expression was associated with tumor size, TNM stage, and lymphatic metastasis, but not with age, gender, and tumor location. In addition, the expression of CRIP1 in K1, TPC-1, TT, and SW529 cells was higher than that in the Nthy-ori 3-1 cells. The highest expression was observed in the SW579 and TT cells. Furthermore, silencing CRIP1 inhibited the proliferation, migration, and invasion of thyroid carcinoma cell lines SW579 and TT. We also found that silencing CRIP1 induced G1 arrest and apoptosis of thyroid carcinoma cell lines SW579 and TT. CONCLUSION: In conclusion, CRIP1 acts as an oncogene in the cell proliferation, migration, and invasion processes of thyroid carcinoma. CRIP1 may serve well as an independent prognostic marker with significant predictive power for use in thyroid carcinoma therapy.


Subject(s)
Apoptosis/physiology , Carrier Proteins/metabolism , Cell Cycle/physiology , LIM Domain Proteins/metabolism , Thyroid Neoplasms/metabolism , Apoptosis/genetics , Blotting, Western , Carrier Proteins/genetics , Cell Cycle/genetics , Cell Line, Tumor , Cell Proliferation/genetics , Cell Proliferation/physiology , Cell Survival/genetics , Cell Survival/physiology , Female , G1 Phase Cell Cycle Checkpoints/genetics , Humans , Immunohistochemistry , In Vitro Techniques , LIM Domain Proteins/genetics , Male , Middle Aged , RNA Interference , Reverse Transcriptase Polymerase Chain Reaction , Thyroid Neoplasms/genetics
17.
Article in Chinese | WPRIM (Western Pacific) | ID: wpr-324600

ABSTRACT

<p><b>OBJECTIVE</b>To evaluate the clinical effects of French door segmented laminectomy decompression for severe cervical OPLL complicated with spinal cord injury.</p><p><b>METHODS</b>The clinical data of 38 patients with serious cervical OPLL complicated with spinal cord injury were retrospectively analyzed and these patients were treated with French door segmented laminectomy decompression and internal fixation from June 2012 to June 2014. There were 25 males and 13 females, aged from 42 to 78 years with an average of 58.2 years. Of them, 35 cases suffered from aggravating neurological symptoms with a definite precipitating factor. Spinal cord injury was related to minor injury of the neck, such as hyperextension of the neck in 3 cases. Preoperative Japanese Orthopaedic Score (JOA) was 8.1±1.7 and Neck Disability Index (NDI) was 19.8±4.4. Preoperative CT scans showed the range of OPLL was more than three segments. The spinal canal was occupied 50% to 85% with an average of 70.7%.</p><p><b>RESULTS</b>All the patients were followed up for 10 to 24 months with an average of 15.6 months. The operative time was 90 to 150 min with an average of 120 min and blood loss was 300 to 800 ml with an average of (480±80) ml. At final follow-up, NDI and JOA were 7.5±2.5 and 13.5±2.0, respectively, and they were obviously improved compared with preoperation. Preoperative cervical Cobb angle was (8.10±2.70)° and at final follow-up was (15.60±1.80)°, and there was significant difference between preoperative and postoperative (<0.05). Deep infection occurred in 1 case, epidural hematoma in 1 case, C₅ nerve root palsy in 3 cases, and axial symptom in 8 cases after operation. No serious complications, such as vertebral artery injury, cerebrospinal fluid leakage, deterioration of neurological dysfunction, or internal fixation failure was found.</p><p><b>CONCLUSIONS</b>French door segmented laminectomy decompression is safe and feasible for severe cervical OPLL complicated with spinal cord injury, and it is worth to be popularized in future.</p>

18.
Article in Chinese | WPRIM (Western Pacific) | ID: wpr-281339

ABSTRACT

As a common type of fracture in cervical, atlas fracture is frequently unstable due to its special anatomical structure. In a previous treatment, external fixation was likely to bring low bony union rate and long-term neck pain, while occipito-cervical fusion and atlantoaxial fusion sacrifice range of motion in cervical spine. Reduction and single section fixation of atlas by anterior lateral mass screws through the transoral approach were reported by some scholars, and the retrospective study demonstrated the high healing rate, reservation of cervical ROM and less bleeding. But it also has high risks of cervical spinal cord and vertebral artery damage, as well as the post-operation infection. Moreover, the indication and fixation strength require further evidences. As a result, this surgical option provides a new way for spinal surgeons to deal with unstable atlas fractures.

19.
Article in Chinese | WPRIM (Western Pacific) | ID: wpr-250667

ABSTRACT

<p><b>OBJECTIVE</b>To investigate the clinical effects of anterior transpediclar screw (ATPS) fixation in treating lower cervical spine fracture and dislocation.</p><p><b>METHODS</b>From January 2009 to December 2011, 18 patients with lower cervical spine fracture and dislocation were treated with ATPS technique, including 12 males and 6 females, aged from 17 to 47 years old with an average of 38.2 years. Severity score of lower cervical spine injuries (SLIC) ranged from 6 to 9 points with an average of 7.5 points. According to ASIA grade of spinal cord injury, 2 cases were classified in grade A, 8 cases in grade B, 6 cases in grade C and 2 cases in grade D. X-ray and CT scan were done after surgery in order to evaluate the safety of ATPS and observe the stability and fusion of injured segment. Spinal cord function was evaluated according to ASIA grade at 3 months after operation and last follow-up.</p><p><b>RESULTS</b>All patients were followed up for 6 to 15 months with an average of 9.5 months. Three months after operation, in aspect of spinal cord function, 8 cases improved 1 grade, 2 cases improved 2 grades; and at final follow-up, 7 cases improved 1 grade, 4 cases improved 2 grades. All patients obtained bony fusion 6 to 8 months after operation with an average of 6.5 months. After operation, 1 case had transient hoarseness and recovered 2 months later;2 cases felt swallowing discomfort, but the symptoms disappeared after about 3 weeks by inhalation. No internal fixation breakage and loosening as well as nerve, blood vessel and esophageal injuries were found.</p><p><b>CONCLUSION</b>As for three columns injury caused by lower cervical spine fracture and dislocation, treatment with anterior transpediclar screw reconstruction can achieve the effect of decompression thoroughly and restore the cervical spine height and physiological curvature. Moreover, this kind of treatment has good stability and can create the favorable conditions for the recovery of spinal cord function.</p>


Subject(s)
Adolescent , Adult , Female , Humans , Male , Middle Aged , Bone Screws , Cervical Vertebrae , Wounds and Injuries , General Surgery , Follow-Up Studies , Joint Dislocations , General Surgery , Recovery of Function , Spinal Fractures , General Surgery
20.
Article in Chinese | WPRIM (Western Pacific) | ID: wpr-301878

ABSTRACT

<p><b>OBJECTIVE</b>To compare statics characteristics between anterior transpedicular screws (ATPS) system and vertebral body screws (VBS) system in lower cervical spine.</p><p><b>METHODS</b>Sixteen fresh cervical specimens were collected and dissected into 32 different units (functional spinal unit, FSU), 8 units in C3,4, C4,5, C5,6 and C6,7 each. The subjects were randomly divided into group A and B. The anterior transpedicular screw-plate system and anterior vertebral body screw-plate system were implanted separately in group A and B. Then, the maximum axial pull out strength was tested and compared between two fixation system.</p><p><b>RESULTS</b>Maximum pull out strength was (604.68 +/- 48.76) N in group A and (488.24 +/- 32.42) N in group B, and there was significant difference between two groups (t = 2.147, P < 0.05). There was no statistically significant difference in all FSU between anterior transpedicular screws system and vertebral body screws system (F(A) = 2.27, F(B) = 2.05, P > 0.05).</p><p><b>CONCLUSION</b>The pull out strength of anterior transpedicular screws system is better than vertebral body screws system, and the anterior transpedicular screws has the biomechanical feasibility in clinic.</p>


Subject(s)
Humans , Biomechanical Phenomena , Bone Plates , Bone Screws , Cervical Vertebrae , General Surgery , Internal Fixators
SELECTION OF CITATIONS
SEARCH DETAIL
...