Pt/CeO2 as Catalyst for Nonoxidative Coupling of Methane: Oxidative Regeneration.

Direct nonoxidative coupling is a promising route for methane upgrading, yet its commercialization is hindered by the lack of efficient catalysts. Pt/CeO2 catalysts with isolated Pt species have attracted an increasing amount of interest in recent years. Herein, we studied the catalytic role and evolution of isolated Pt centers on CeO2 prepared by flame spray pyrolysis under the harsh reaction conditions of nonoxidative methane coupling. During the reaction at 800 °C, the isolated Pt sites sinter, leading to a loss of the ethylene and ethane yield. The agglomerated Pt can be redispersed by using an in situ regeneration strategy in oxygen. We found that isolated Pt centers are able to activate methane only at the initial reaction stage, and the CePt5 alloy acts as the active phase in the prolonged reaction.

Role of Strontium Cations in ZSM-5 Zeolite in the Methanol-to-Hydrocarbons Reaction.

The selectivity of the methanol-to-hydrocarbons (MTH) reaction can be tuned by modifying zeolite catalysts with alkaline earth metals, which typically increase propylene selectivity and catalyst stability. Here we employed Sr2+ as its higher atomic number in comparison to the zeolite T atoms facilitates characterization by scanning transmission electron microscopy and operando X-ray absorption spectroscopy. Sr2+ dispersed in the ZSM-5 micropores coordinates water, methanol, and dimethyl ether during the MTH reaction. Complementary characterization with nuclear magnetic resonance spectroscopy, thermogravimetric analysis combined with mass spectrometry, operando infrared spectroscopy, and X-ray diffraction points to the retention of substantially more adsorbates during the MTH reaction in comparison to Sr-free zeolites. Our findings support the notion that alkaline earth metals modify the porous reaction environment such that the olefin cycle is favored over the aromatic cycle in the MTH, explaining the increased propylene yield and lower deactivation rate.

Ca Cations Impact the Local Environment inside HZSM-5 Pores during the Methanol-to-Hydrocarbons Reaction.

The methanol-to-hydrocarbons (MTH) process is an industrially relevant method to produce valuable light olefins such as propylene. One of the ways to enhance propylene selectivity is to modify zeolite catalysts with alkaline earth cations. The underlying mechanistic aspects of this type of promotion are not well understood. Here, we study the interaction of Ca2+ with reaction intermediates and products formed during the MTH reaction. Using transient kinetic and spectroscopic tools, we find strong indications that the selectivity differences between Ca/ZSM-5 and HZSM-5 are related to the different local environment inside the pores due to the presence of Ca2+. In particular, Ca/ZSM-5 strongly retains water, hydrocarbons, and oxygenates, which occupy as much as 10% of the micropores during the ongoing MTH reaction. This change in the effective pore geometry affects the formation of hydrocarbon pool components and in this way directs the MTH reaction toward the olefin cycle.

Selective methanethiol-to-olefins conversion over HSSZ-13 zeolite.

A methanethiol-to-olefins (MtTO) equivalent of methanol-to-olefins (MTO) chemistry is demonstrated. CH3SH can be converted to ethylene and propylene in a similar manner as CH3OH over SSZ-13 zeolite involving a hydrocarbon pool mechansim. Methylated aromatic intermediates were identified by 13C NMR analysis. Comparison of MtTO and MTO chemistry provides clues about the mechanism of C-C bond formation and catalyst deactivation.