In vitro biofilm formation on different ceramic biomaterial surfaces: Coating with two bactericidal glasses.

OBJECTIVES: To compare biofilm formation on the surface of different ceramic biomaterials to be used in implant dentistry. METHODS: In vitro biofilm formation was investigated from mixtures of standard reference strains of Streptococcus oralis, Veillonella parvula, Actinomyces naeslundii, Fusobacterium nucleatum, Aggregatibacter actinomycetemcomitans and Porphyromonas gingivalis. Sterile ceramic calcium hydroxyapatite discs (HA) as control, sterile Al2O3/Ce-TZP nanocomposite sandblasted discs (material A1) and sterile Al2O3/Ce-TZP nanocomposite sandblasted discs and coated with two types of antimicrobial glasses (materials A2 and A3) were used. Biofilms were grown on the four surfaces and evaluated after 12, 24, 48 and 72 h of incubation. Biofilms were examined by confocal laser scanning microscopy (CLSM). In addition, counts of live bacterial cells of the target species A. actinomycetemcomitans, F. nucleatum and P. gingivalis were calculated by quantitative polymerase chain reaction (qPCR) combined with propidium monoazide (PMA). For data analysis, bacterial counts were compared with a multivariate general lineal model. RESULTS: Using CLSM, cell vitality decreased in A2 and A3. With qPCR-PMA, significant differences in vitality were observed forA. actinomycetemcomitans in A3 after 48 and 72 h of incubation. With respect to the development of the biofilms, a significant increase in counts on HA and materials A1 and A2 was observed for A. actinomycetemcomitans and F. nucleatum. Conversely, for P. gingivalis, no differences were found for HA and materials A1 and A2. SIGNIFICANCE: Differences in biofilm formation were detected among the different tested materials. The ceramic material A3 has an effect on the vitality of A. actinomycetemcomitans growing in an in vitro biofilm model.

Comparative gene expression analysis of Porphyromonas gingivalis ATCC 33277 in planktonic and biofilms states.

BACKGROUND AND OBJECTIVE: Porphyromonas gingivalis is a keystone pathogen in the onset and progression of periodontitis. Its pathogenicity has been related to its presence and survival within the subgingival biofilm. The aim of the present study was to compare the genome-wide transcription activities of P. gingivalis in biofilm and in planktonic growth, using microarray technology. MATERIAL AND METHODS: P. gingivalis ATCC 33277 was incubated in multi-well culture plates at 37°C for 96 hours under anaerobic conditions using an in vitro static model to develop both the planktonic and biofilm states (the latter over sterile ceramic calcium hydroxyapatite discs). The biofilm development was monitored by Confocal Laser Scanning Microscopy (CLSM) and Scanning Electron Microscopy (SEM). After incubation, the bacterial cells were harvested and total RNA was extracted and purified. Three biological replicates for each cell state were independently hybridized for transcriptomic comparisons. A linear model was used for determining differentially expressed genes and reverse transcription quantitative polymerase chain reaction (RT-qPCR) was used to confirm differential expression. The filtering criteria of ≥ ±2 change in gene expression and significance p-values of <0.05 were selected. RESULTS: A total of 92 out of 1,909 genes (4.8%) were differentially expressed by P. gingivalis growing in biofilm compared to planktonic. The 54 up-regulated genes in biofilm growth were mainly related to cell envelope, transport, and binding or outer membranes proteins. Thirty-eight showed decreased expression, mainly genes related to transposases or oxidative stress. CONCLUSION: The adaptive response of P. gingivalis in biofilm growth demonstrated a differential gene expression.

Response to antiseptic agents of periodontal pathogens in in vitro biofilms on titanium and zirconium surfaces.

OBJECTIVE: The aim of this study was to develop in vitro biofilms on SLA titanium (Ti-SLA) and zirconium oxide (ZrO2) surfaces and to evaluate the effect of antiseptic agents on the number of putative periodontal pathogenic species. METHODS: An in vitro biofilm model was developed on sterile discs of Ti-SLA and ZrO2. Three antiseptic agents [chlorhexidine and cetyl-pyridinium-chloride (CHX/CPC), essential oils (EEOOs) and cetyl-peridinium-chloride (CPC)] were applied to 72-h biofilms, immersing discs during 1min in the antiseptic solution, either with or without mechanical disruption. Viable bacteria [colony forming units (CFU/mL)] were measured by quantitative polymerase chain reaction (qPCR) combined with propidium monoazide. A generalized lineal model was constructed to determine the effect of the agents on the viable bacterial counts of Aggregatibacter actinomycetemcomitans, Porphyromonas gingivalis and Fusobacterium nucleatum on each surface. RESULTS: The exposure to each antiseptic solution resulted in a statistically significant reductions in the number of viable target species included in the in vitro multi-species biofilm, on both Ti-SLA and ZrO2 (p<0.001) which was of up to 2 orders for A. actinomycetemcomitans, for P. gingivalis 2 orders on Ti-SLA and up to 3 orders on ZrO2, and, for F. nucleatum up to 4 orders. No significant differences were found in counts of the tested bacteria between in vitro biofilms formed on both Ti-SLA and ZrO2, after topically exposure to the antimicrobial agents whether the application was purely chemical or combined with mechanical disruption. SIGNIFICANCE: A. actinomycetemcomitans, P. gingivalis and F. nucleatum responded similarly to their exposure to antiseptics when grown in multispecies biofilms on titanium and zirconium surfaces, in spite of the described structural differences between these bacterial communities.

An in vitro biofilm model associated to dental implants: structural and quantitative analysis of in vitro biofilm formation on different dental implant surfaces.

OBJECTIVES: The impact of implant surfaces in dental biofilm development is presently unknown. The aim of this investigation was to assess in vitro the development of a complex biofilm model on titanium and zirconium implant surfaces, and to compare it with the same biofilm formed on hydroxyapatite surface. METHODS: Six standard reference strains were used to develop an in vitro biofilm over sterile titanium, zirconium and hydroxyapatite discs, coated with saliva within the wells of pre-sterilized polystyrene tissue culture plates. The selected species used represent initial (Streptococcus oralis and Actinomyces naeslundii), early (Veillonella parvula), secondary (Fusobacterium nucleatum) and late colonizers (Porphyromonas gingivalis and Aggregatibacter actinomycetemcomitans). The developed biofilms (growth time 1 to 120h) were studied with confocal laser scanning microscopy using a vital fluorescence technique and with low-temperature scanning electron microscopy. The number (colony forming units/biofilm) and kinetics of the bacteria within the biofilm were studied with quantitative PCR (qPCR). As outcome variables, the biofilm thickness, the percentage of cell vitality and the number of bacteria were compared using the analysis of variance. RESULTS: The bacteria adhered and matured within the biofilm over the three surfaces with similar dynamics. Different surfaces, however, demonstrated differences both in the thickness, deposition of the extracellular polysaccharide matrix as well as in the organization of the bacterial cells. SIGNIFICANCE: While the formation and dynamics of an in vitro biofilm model was similar irrespective of the surface of inoculation (hydroxyapatite, titanium or zirconium), there were significant differences in regards to the biofilm thickness and three-dimensional structure.

Characterization and application of a flow system for in vitro multispecies oral biofilm formation.

BACKGROUND AND OBJECTIVE: Bacteria in the oral cavity grow in the form of biofilms; these structures are subject to constant saliva or gingival crevicular fluid flow conditions. The aims of this study were: (i) to develop and to characterize an in-vitro biofilm model with oral bacteria growing under flow and shear conditions; and (ii) to demonstrate the usefulness of the model for evaluating the activity of three antiplaque agents. MATERIAL AND METHODS: We used a bioreactor to grow the oral bacteria Streptococcus oralis, Actinomyces naeslundii, Veillonella parvula, Fusobacterium nucleatum, Aggregatibacter actinomycetemcomitans and Porphyromonas gingivalis under planktonic conditions. Biofilms were established using a modified Robbins device on hydroxyapatite (HAP) discs. Three- to 7-d-old biofilms were analysed using culture methods, scanning electron microscopy, Live/Dead staining and fluorescence in-situ hybridization (confocal laser scanning microscopy). Finally, we assessed the antimicrobial activity of three mouthrinses [0.12% chlorhexidine (CHX), 0.12% chlorhexidine and sodium fluoride (CHX+NaF) and 0.12% chlorhexidine and 0.05% cetylpyridinium chloride (CHX+CPC)] using a planktonic test (short interval-killing test) and in our 4-d biofilm model. RESULTS: The viable cell counts showed that each species was consistently found in the biofilms throughout the study. The architecture and cell distribution were similar to those described for biofilms in situ, with the exception of a thin layer of living cells that was found close to the HAP. The effectiveness test of the mouthwashes demonstrated that cells in biofilms showed more tolerance compared with planktonic cells. Moreover, it was observed that in 4-d biofilm formed in vitro, CHX+CPC caused significantly higher mortality compared with CHX (p = 0.003) and CHX+NaF (p < 0.001). CONCLUSION: Our results suggest that we have a highly reproducible system for multispecies oral biofilm formation and that it is a useful tool for assessing antibacterial molecules before their clinical evaluation. It also has great potential to be used in basic research on supragingival and subgingival biofilms.

Quantitative real-time PCR combined with propidium monoazide for the selective quantification of viable periodontal pathogens in an in vitro subgingival biofilm model.

BACKGROUND AND OBJECTIVES: Differentiation of live and dead cells is an important challenge when using molecular diagnosis for microbial identification. This is particularly relevant when bacteria have been exposed to antimicrobial agents. The objective of this study was to test a method using quantitative real-time polymerase chain reaction (qPCR) combined with propidium monoazide (PMA), developed for the selective quantification of viable P. gingivalis, A. actinomycetemcomitans, F. nucleatum and total bacteria in an in vitro biofilm model after antimicrobial treatment. MATERIAL AND METHODS: PMA-qPCR method was tested in an in vitro biofilm model, using isopropyl alcohol as the antimicrobial agent. Matured biofilms were exposed for 1, 5, 10 and 30 min to isopropyl alcohol by immersion. Biofilms were disrupted and PMA added (final concentration of 100 µm). After DNA isolation, qPCR was carried out using specific primers and probes for the target bacteria. The differentiation of live and dead cells was tested by analysis of variance. RESULTS: When PMA was used in the presence of viable target bacterial cells, no statistically significant inhibition of qPCR amplification was detected (p > 0.05 in all cases). Conversely, after immersion in isopropyl alcohol of the biofilm, PMA resulted in a significant total reduction of qPCR amplification of about 4 log10 . P. gingivalis showed a vitality reduction in the biofilm of 3 log10 , while A. actinomycetemcomitans and F. nucleatum showed a 2 log10 reduction. CONCLUSION: These results demonstrate the efficiency of PMA for differentiating viable and dead P. gingivalis, A. actinomycetemcomitans and F. nucleatum cells, as well as total bacteria, in an in vitro biofilm model, after being exposed to an antimicrobial agent. Hence, this PMA-qPCR method may be useful for studying the effect of antimicrobial agents aimed at oral biofilms.

Analysis of viable vs. dead Aggregatibacter actinomycetemcomitans and Porphyromonas gingivalis using selective quantitative real-time PCR with propidium monoazide.

BACKGROUND AND OBJECTIVES: One of the major disadvantages of DNA-based microbial diagnostics is their inability to differentiate DNA between viable and dead microorganisms, which could be important when studying etiologically relevant pathogens. The aim of this investigation was to optimize a method for the selective detection and quantification of only viable Aggregatibacter actinomycetemcomitans and Porphyromonas gingivalis cells by combining quantitative real-time polymerase chain reaction (qPCR) and propidium monoazide (PMA). MATERIAL AND METHODS: Three different concentrations of PMA (10, 50 or 100 µm) were added to suspensions of 10(6) (CFU)/mL of viable/dead A. actinomycetemcomitans and P. gingivalis cells. After DNA isolation, qPCR was carried out using specific primers and probes for the tested bacteria. PMA was further tested with different mixtures containing varying ratios of viable and dead cells. The efficacy of PMA to detect viable/dead cells was tested by analysis of variance. RESULTS: For these specific bacterial pathogens, 100 µm PMA resulted in a significant reduction of qPCR amplification with dead cells (10(6) CFU/mL), while with viable cells no significant inhibition was detected. PMA was also effective in detecting selectively viable cells by qPCR detection, when mixtures of varying ratios of viable and dead bacteria were used. CONCLUSIONS: This study demonstrated the efficiency of PMA for differentiating viable and dead A. actinomycetemcomitans and P. gingivalis cells. This method of PMA-qPCR may be useful for monitoring new antimicrobial strategies and for assessing the pathogenic potential of A. actinomycetemcomitans and P. gingivalis in different oral conditions when using molecular diagnostic methods.

Structure, viability and bacterial kinetics of an in vitro biofilm model using six bacteria from the subgingival microbiota.

BACKGROUND AND OBJECTIVE: There are few in vitro models available in the scientific literature for study of the structure, formation and development of the subgingival biofilm. The purpose of this study was to develop and validate an in vitro biofilm model, using representative selected bacteria from the subgingival microbiota. MATERIAL AND METHODS: Six standard reference strains were used to develop biofilms over sterile ceramic calcium hydroxyapatite discs coated with saliva within the wells of presterilized polystyrene tissue culture plates. The selected species represent initial (Streptococcus oralis and Actinomyces naeslundii), early (Veillonella parvula), secondary (Fusobacterium nucleatum) and late colonizers (Porphyromonas gingivalis and Aggregatibacter actinomycetemcomitans). The structure of the biofilm obtained was studied using a vital fluorescence technique in conjunction with confocal laser scanning microscopy. The biofilm bacterial kinetics were studied by terminal restriction fragment length polymorphism analysis. RESULTS: After 12 h, initial and early colonizers were the first microorganisms detected adhering to the calcium hydroxyapatite discs. The intermediate colonizer F. nucleatum was not detected in the model until 24 h of incubation. Late colonizers A. actinomycetemcomitans and P. gingivalis could be measured inside the biofilm after 48 h. The biofilm reached its steady state between 72 and 96 h after inoculation, with bacterial vitality increasing from the hydroxyapatite surface to the central part of the biofilm. CONCLUSION: An in vitro biofilm model was developed and validated, demonstrating a pattern of bacterial colonization and maturation similar to the in vivo development of the subgingival biofilm.

Relative effects on virulence of mutations in the sap, pel, and hrp loci of Erwinia chrysanthemi.

We constructed strains of Erwinia chrysanthemi EC16 with multiple mutations involving three virulence systems in this bacterium, namely pel (coding for the major pectate lyases pelABCE), hrp (hypersensitive response and pathogenicity), and sap (sensitivity to antimicrobial peptides). The relative effects on virulence of those mutations have been analyzed on potato tubers and chicory leaves. In potato tubers, the sap mutation (BT105) had a greater effect in the reduction of the virulence than the pel (CUCPB5006) and hrp (CUCPB5039) mutations. This reduction was similar to that observed in the pel-hrp double mutant (CUCPB5037). The analysis of the strains affected in Pel-Sap (BT106), Hrp-Sap (BT107), and Pel-Hrp-Sap (BT108) suggested that the effects of these mutations are additive. In chicory leaves, the mutation in the sap locus appeared to have a greater effect than in potato tubers. The competitive indices of strains BT105, UM1005 (Pel-), CUCPB5039, and CUCPB5037 have been estimated in vivo and in vitro. These results indicate that the mutation in the hrp locus can be complemented in vivo by coinfection, whereas the mutations in pel and sap cannot.

Evidence against a direct antimicrobial role of H2O2 in the infection of plants by Erwinia chrysanthemi.

We have investigated the role of bacterial resistance to oxidative stress in pathogenesis. The oxyR gene from the pathogenic bacterium Erwinia chrysanthemi has been characterized. It is closely related to that found in Escherichia coli (88% overall amino acid identity). An E. chrysanthemi oxyR mutant strain was constructed by marker exchange. After induction with a sublethal dose of H2O2, this mutant was more sensitive to H2O2 and showed reduced levels of catalase and glutathione reductase activities, compared with the wild type. The oxyR mutant was unable to form individual colonies on agar plates unless catalase was added exogenously. However, it retained full virulence in potato tubers and tobacco leaves. These results suggest that the host-produced H2O2 has no direct antimicrobial effect on the interaction of E. chrysanthemi with the two plant species.