ABSTRACT
A thermodynamic study of the structural large-pore (LP) to narrow pore (NP) transition in various Metal Organic Frameworks (MOFs) is presented. First, the pressure induced transition at a constant temperature is investigated using a Tian-Calvet microcalorimeter set-up equipped with a high pressure cell. This device permits simultaneous measurements of the mechanical work and heat associated with the LP â NP transition. It is shown that MIL-53(Al) and MIL-53(Cr) have similar thermodynamic and mechanical behaviour whilst the MIL-47(V) system is characterized by much higher transition energy and mechanical work. Second, the temperature induced transition at ambient pressure is studied by means of differential scanning calorimetry (DSC) combined with X-ray absorption spectroscopy. This set-up enables one to follow simultaneously the structural changes associated with the phase transition detected by DSC. The MIL-53(Cr)-Br functionalized MOF is chosen here as a case study where both energetics and structural changes are discussed.
ABSTRACT
Stability and sorption of Metal-Organic Frameworks (MOFs) towards water are critical in many applications, and can a priori be modulated through the introduction of suitable organic functional groups on their backbone. We report here the preparation of a series of Zr(iv)-based MOFs functionalized with alkyl and perfluoroalkyl groups and their characterization by X-ray powder diffraction, multi-nuclei ((1)H, (13)C, (19)F) solid state nuclear magnetic resonance analyses, and nitrogen sorption measurements at 77 K. Their water sorption behavior was evaluated at 298 K and related to their physico-chemical features, highlighting both the effect of the confinement and the nature of the functional groups on the hydrophilic/hydrophobic balance.
ABSTRACT
The scalable and environmentally-friendly synthesis of mixed Fe(III)/M(II) (M = Ni, Co, Mg) polycarboxylate porous MOFs based on the Secondary Building Unit approach is reported. A combination of in situ infrared spectroscopy, (57)Fe Mössbauer spectrometry and adsorption microcalorimetry confirms the direct accessibility of the iron(III) and metal(II) sites under low temperature activation conditions.
ABSTRACT
The adsorption of short linear alkanes has been explored in the highly flexible MIL-53(Cr) porous metal-organic framework by means of molecular simulations based on configurational bias grand canonical Monte Carlo. The unusual shape of the adsorption isotherms with the existence of steps has been successfully modelled by creating a (narrow pore, large pore) phase mixture domain, the composition of which varies with pressure. A further step consisted of combining our computational approach with several experimental tools including microcalorimetry, gravimetry and in situ X-ray diffraction, to fully characterize the adsorption behaviour of the isostructural MIL-47(V) rigid MOF, i.e. the preferential arrangement of each type of alkane inside the pores and the resulting interaction energy. Finally, relationships are established between the adsorption enthalpies and both alkyl chain length and polarisability of the alkanes that can be further utilised to predict the energetics of the adsorption process for longer alkane chains.
ABSTRACT
This investigation is based on a combination of experimental tools completed by a computational approach to deeply characterize the unusual adsorption behavior of the flexible MIL-53(Fe) in the presence of short linear alkanes. In contrast to the aluminum or chromium analogues we previously reported, the iron MIL-53 solid, which initially exhibits a closed structure in the dry state, shows more complex adsorption isotherms with multisteps occurring at pressures that depend on the nature of the alkane. This behavior has been attributed to the existence of four discrete pore openings during the whole adsorption process. Molecular simulations coupled with in situ X-ray powder diffraction were able to uncover these various structural states.
ABSTRACT
Quasielastic neutron scattering measurements are combined with molecular dynamics simulations to extract the self-diffusion coefficient of hydrogen in the metal organic frameworks MIL-47(V) and MIL-53(Cr). We find that the diffusivity of hydrogen at low loading is about 2 orders of magnitude higher than in zeolites. Such a high mobility has never been experimentally observed before in any nanoporous materials, although it was predicted in carbon nanotubes. Either 1D or 3D diffusion mechanisms are elucidated depending on the chemical features of the MIL framework.
ABSTRACT
The thermal and structural stability of sulfonated cross-linked PEEK (polyether ether ketone) and its silicon-containing class II hybrid derivatives were characterized by combination of mass spectrometry, infrared spectroscopy, X-ray diffraction, thermogravimetric analysis, and differential scanning calorimetry. Thermodynamic properties of the hybrids were determined, including glass-transition temperature, degree of crystallinity, and thermal stability. The decomposition processes of the hybrid polymers could be consistently interpreted and their energetics quantitatively determined. The introduction of inorganic silanol moieties improves the thermal stability compared to sulfonated products.
Subject(s)
Ketones/chemistry , Polymers/chemistry , Temperature , Thermodynamics , Electric Conductivity , Molecular Structure , ProtonsABSTRACT
Molecular Dynamics simulations have been carried out in NaX and NaY Faujasite systems to deepen understanding of the cation rearrangement during the CO2 adsorption process suggested by our recent diffusivity measurements. This study is a major contribution since the rearrangement of the cations in Faujasite, the most promising adsorbent for CO2 storage, can represent a significant breakthrough in understanding the adsorption and diffusion processes at the mircroscopic scale. For NaY, it has been shown that at low and intermediate loadings, SII cations can migrate toward the center of the supercage due to strong interactions with the adsorbates, followed by a hopping of SI'cation from the sodalite cage into the supercage to fill the vacant SII site. The SI cations are only displaced at a higher loading, leading to cation de-trapping out of the double six rings into the vacant SI' sites. For NaX, the SIII' cations which occupy the most accessible adsorption sites move significantly upon coordination to the carbon dioxide molecules. The SI' and SII cations remain consistently located in their initial sites whatever the loading. Indeed, the most probable migration mechanism involves SIII' cation displacements into nearby vacant SIII' sites.
ABSTRACT
Molecular simulations have been coupled with adsorption microcalorimetry measurements in order to understand more deeply the interactions between carbon dioxide and various types of faujasite surfaces. The modeling studies, based on newly derived interatomic potentials for describing the interactions within the whole system, provide isotherms and evolutions of the differential enthalpy of adsorption as a function of coverage for DAY, NaY, and NaLSX which are in very good accordance with those obtained experimentally. The microscopic mechanism of CO2 adsorption was carefully analyzed, with different behaviors proposed, depending on the energetic characteristics of each faujasite surface, which are consistent with the trends observed for the differential enthalpies of adsorption.
