Markedly Enhanced Surface Hydroxyl Groups of TiO2 Nanoparticles with Superior Water-Dispersibility for Photocatalysis.

The benefits of increasing the number of surface hydroxyls on TiO2 nanoparticles (NPs) are known for environmental and energy applications; however, the roles of the hydroxyl groups have not been characterized and distinguished. Herein, TiO2 NPs with abundant surface hydroxyl groups were prepared using commercial titanium dioxide (ST-01) powder pretreated with alkaline hydrogen peroxide. Through this simple treatment, the pure anatase phase was retained with an average crystallite size of 5 nm and the surface hydroxyl group density was enhanced to 12.0 OH/nm², estimated by thermogravimetric analysis, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy. Especially, this treatment increased the amounts of terminal hydroxyls five- to six-fold, which could raise the isoelectric point and the positive charges on the TiO2 surface in water. The photocatalytic efficiency of the obtained TiO2 NPs was investigated by the photodegradation of sulforhodamine B under visible light irradiation as a function of TiO2 content, pH of solution, and initial dye concentration. The high surface hydroxyl group density of TiO2 NPs can not only enhance water-dispersibility but also promote dye sensitization by generating more hydroxyl radicals.

Sensitivity enhancement in the fluorometric determination of aliphatic amines using naphthalene-2,3-dicarboxaldehyde derivatization followed by vortex-assisted liquid-liquid microextraction.

A highly sensitive liquid chromatographic method was developed for the fluorometric determination of trace amounts of linear aliphatic primary amines. Prior to extraction, amines were derivatized with naphthalene-2,3-dicarboxaldehyde (NDA) in the presence of cyanide ion (CN) and extracted by vortex-assisted liquid-liquid microextraction (VALLME). The optimum conditions were as follows: derivatization reaction time for 5 min in 2.0 mL aqueous donor samples with 50 µM NDA/CN, and 10mM borate buffer at pH 9; vortex extraction time for 20s in the VALLME step with 50 µL of isooctane as the extractant phase; centrifugation for 1 min at 6000 rpm. Under the optimum conditions, the limits of detection (LOD) were between 0.01 and 0.04 nmol L(-1). The calibration curves showed good linearity in the range of 0.1-20 nmol L(-1). In comparison with previous work using o-phthalaldehyde/2-mercaptoethanol derivatization, the method has much more stable fluorescent derivatives, higher fluorescence intensities, and greater extraction efficiencies. The sensitivity enhancement factors (SEF) were between 2 and 70, which is in good agreement with the theoretical values calculated from partition coefficients in VALLME system.

Photochemical redox reactions of copper(II)-alanine complexes in aqueous solutions.

The photochemical redox reactions of Cu(II)/alanine complexes have been studied in deaerated solutions over an extensive range of pH, Cu(II) concentration, and alanine concentration. Under irradiation, the ligand-to-metal charge transfer results in the reduction of Cu(II) to Cu(I) and the concomitant oxidation of alanine, which produces ammonia and acetaldehyde. Molar absorptivities and quantum yields of photoproducts for Cu(II)/alanine complexes at 313 nm are characterized mainly with the equilibrium Cu(II) speciation where the presence of simultaneously existing Cu(II) species is taken into account. By applying regression analysis, individual Cu(I) quantum yields are determined to be 0.094 ± 0.014 for the 1:1 complex (CuL) and 0.064 ± 0.012 for the 1:2 complex (CuL2). Individual quantum yields of ammonia are 0.055 ± 0.007 for CuL and 0.036 ± 0.005 for CuL2. Individual quantum yields of acetaldehyde are 0.030 ± 0.007 for CuL and 0.024 ± 0.007 for CuL2. CuL always has larger quantum yields than CuL2, which can be attributed to the Cu(II) stabilizing effect of the second ligand. For both CuL and CuL2, the individual quantum yields of Cu(I), ammonia, and acetaldehyde are in the ratio of 1.8:1:0.7. A reaction mechanism for the formation of the observed photoproducts is proposed.

Vortex-assisted liquid-liquid microextraction coupled with derivatization for the fluorometric determination of aliphatic amines.

A new one-step derivatization and microextraction technique was developed for the fluorometric determination of C(1)-C(8) linear aliphatic primary amines in complex sample solutions containing high levels of amino acids. In this method, amines were derivatized with o-phthalaldehyde (OPA) and 2-mercaptoethanol (2-ME) in aqueous solution and extracted simultaneously by vortex-assisted liquid-liquid microextraction (VALLME). Parameters affecting the extraction efficiency were investigated in detail. The optimum conditions were as follows: 50 µL of isooctane as the extractant phase; 2.0 mL aqueous donor samples with 12 mM OPA, 24 mM 2-ME, and 0.1 M borate buffer at pH 10; 1 min vortex extraction time; centrifugation for 4 min at 6000 rpm. After centrifugation, the enriched analytes in the floated extractant phase were determined by HPLC-FL in less than 14 min. Under the optimum conditions, the limits of detection were of the order of 0.09-0.31 nM. The calibration curves showed good linearity over the investigated concentration range between 0.4 and 40 nM. The proposed method has been applied to the determination of aliphatic amines in acidophilus milk, beer, and Cu(II)/amino acid solution.

Covalent linkage of nanodiamond-paclitaxel for drug delivery and cancer therapy.

A nanoparticle-conjugated cancer drug provides a novel strategy for cancer therapy. In this study, we manipulated nanodiamond (ND), a carbon nanomaterial, to covalently link paclitaxel for cancer drug delivery and therapy. Paclitaxel was bound to the surface of 3-5 nm sized ND through a succession of chemical modifications. The ND-paclitaxel conjugation was measured by atomic force microscope and nuclear magnetic resonance spectroscopy, and confirmed with infrared spectroscopy by the detection of deuterated paclitaxel. Treatment with 0.1-50 microg ml(-1) ND-paclitaxel for 48 h significantly reduced the cell viability in the A549 human lung carcinoma cells. ND-paclitaxel induced both mitotic arrest and apoptosis in A549 cells. However, ND alone or denatured ND-paclitaxel (after treatment with strong alkaline solution, 1 M NaOH) did not induce the damage effects on A549 cells. ND-paclitaxel was taken into lung cancer cells in a concentration-dependent manner using flow cytometer analysis. The ND-paclitaxel particles were located in the microtubules and cytoplasm of A549 cells observed by confocal microscopy. Furthermore, ND-paclitaxel markedly blocked the tumor growth and formation of lung cancer cells in xenograft SCID mice. Together, we provide a functional covalent conjugation of ND-paclitaxel, which can be delivered into lung carcinoma cells and preserves the anticancer activities on the induction of mitotic blockage, apoptosis and anti-tumorigenesis.

Comparative atomic force and scanning electron microscopy: an investigation of structural differentiation of hepatic stellate cells.

The molecular mechanism leading to the transdifferentiation of hepatic stellate cells (HSC) into myofibroblast-like cells following liver injury is not well understood. The state of cultured rat HSCs was determined using primarily fluorescence microscopy (UV), immunofluorescence (IF) (Glial fibrillary acidic protein (GFAP), Desmin, alpha-smooth muscle actin (alpha-SMA), F-actin) and immunocytochemistry (ICC) (GFAP, Desmin, alpha-SMA, Fibulin-2). Additionally, tapping-mode atomic force microscopy (TM-AFM) and field-emission scanning electron microscopy (FE-SEM) with low-resistivity indium-tin-oxide (ITO) thin-film were performed to observe the micro-morphological character of cells during HSC differentiation. Quiescent HSCs changed to the activated state were identified via UV, IF, and ICC observations. Normal rat HSCs (NHSCs) and thioacetamide-induced rat HSCs (THSCs) were demonstrated to be UV(-), GFAP(+), Desmin(+), alpha-SMA(+) and Fibulin-2(-). After F-actin staining, lamellipodia and filopodia were found in both NHSCs and THSCs, but membrane ruffles were only seen in THSCs. The micro-structures of lamellipodia and filopodia in both NHSCs and THSCs were confirmed using FE-SEM and TM-AFM with ITO; in contrast, the micro-projection was not found. Moreover, "aerial root" structures were observed for the first time in the filopodia of THSCs using TM-AFM. These results reveal that HSC transdifferentiation to a myofibroblastic-like cell (activated HSC) from thioacetamide-induced rat HSC induces extensive changes in the cytoskeleton.

Determination of volatile organic compounds in workplace air by multisorbent adsorption/thermal desorption-GC/MS.

Investigation of volatile organic compounds (VOCs) was first conducted in the air of class-100 cleanrooms at liquid crystal display (LCD) fabrication facilities. Air samples were collected on multisorbent tubes (including Carbopack B, Carbopack C, and Carbosieve S-III) and analyzed using adsorption/thermal desorption coupled with gas chromatography-mass spectrometry (GC-MS). Optimal conditions lead to average recoveries in the range of 96.2-98.2%, and method detection limits between 0.38 and 0.78 ppb, under the condition of 1-l sampling volume and 80% relative humidity. The method appears to be accurate, sensitive, simple and well-suited for determining VOC distributions from various stages of LCD manufacturing process and temporal variations of the analyte concentrations. About 15 VOCs were identified in workplace air. The major pollutants such as propylene glycol methyl ether acetate (PGMEA), butyl acetate, and acetone that are commonly used in the opto-electronics industry were detected and accurately quantified with the established method.

Capillary electrophoretic analysis of the derivatives and isomers of benzoate and phthalate.

A capillary electrophoretic method for the analysis of 12 commonly found derivatives and isomers of benzoate and phthalate, including p-toluic acid, p-acetamido and p-hydroxy derivatives of benzoic acid, salicylic acid and its acetyl ester, 2- and 4-isomers of carboxybenzaldehyde, meta-, para-, and ortho-isomers of phthalic acid, and monomethyl terephthalic acid was developed. Capillary electrophoresis (CE) was performed in the free zone electrophoresis mode. Performing CE in 10 mM phosphate buffer, pH 7.0 could separate most of the benzoic acid derivatives except the structural or positional isomers. The positional isomers of phthalic acids could be completely separated with co-addition of alpha- and beta-cyclodextrins. Addition of poly(ethylene glycol) 600 (4%) could further resolve some structural isomers. The CE method developed here is rapid, i.e. complete separation could be achieved in less than 8 min for the nine monoanionic benzoate derivatives and in less than 14 min for the three dianionic phthalate isomers. The new method has good precision and linearity and can be readily applied to real samples for quantitative analysis. It is sensitive and can detect sub-ppm (w/w) level of impurity in real terephthalic samples.

Measurement of toxic volatile organic compounds in indoor air of semiconductor foundries using multisorbent adsorption/thermal desorption coupled with gas chromatography-mass spectrometry.

A method for the qualitative and quantitative analysis of volatile organic compounds (VOCs) in the air of class-100 clean rooms at semiconductor fabrication facilities was developed. Air samples from two semiconductor factories were collected each hour on multisorbent tubes (including Carbopack B, Carbopack C, and Carbosieve SIII) with a 24-h automatic active sampling system and analyzed using adsorption/thermal desorption coupled with gas chromatography-mass spectrometry. Experimental parameters, including thermal desorption temperature, desorption time, and cryofocusing temperature, were optimized. The average recoveries and the method detection limits for the target compounds were in the range 94-101% and 0.31-0.89 ppb, respectively, under the conditions of a 1 L sampling volume and 80% relative humidity. VOCs such as acetone, isopropyl alcohol, 2-heptanone, and toluene, which are commonly used in the semiconductor and electronics industries, were detected and accurately quantified with the established method. Temporal variations of the analyte concentrations observed were attributed to the improper use of organic solvents during operation.