Mo-Doped LSCF as a Novel Coke-Resistant Anode for Biofuel-Fed SOFC.

Climate change and damage to the environment, as well as the limitations of fossil fuels, have pushed governments to explore infinite renewable energy options such as biofuels. Solid Oxide Fuel Cell (SOFC) is a sustainable energy device that transforms biofuels into power and heat. It is now being researched to function at intermediate temperatures (600-700 °C) in order to prevent material deterioration and improve system life span. However, one of the major disadvantages of reducing the temperature is that carbon deposition impairs the electrochemical performance of the cell with a Ni-YSZ traditional anode. Here, molybdenum was doped into La0.6Sr0.4Co0.2Fe0.8O3-δ (LSCFMo) as an innovative anode material with higher coke resistance and better phase stability under reducing conditions. X-ray diffraction (XRD) analysis showed increasing phase stability by increasing the Mo dopant. Electrochemical measurements proved that the LSCFMo anode is an active catalyst towards the methanol oxidation even at low temperatures as 600 °C, with an open circuit voltage (OCV) of 0.55 V, while GDC10 (Ga0.9Ce0.1O1.95) is used as the electrolyte. As an insightful result, no trace of any carbon deposition was found on the anode side after the tests. The combination of phase composition, morphological, and electrochemical studies demonstrate that LSCFMo is a suitable anode material for SOFCs fed by biofuels.

Lanthanum Ferrites-Based Exsolved Perovskites as Fuel-Flexible Anode for Solid Oxide Fuel Cells.

Exsolved perovskites can be obtained from lanthanum ferrites, such as La0.6Sr0.4Fe0.8Co0.2O3, as result of Ni doping and thermal treatments. Ni can be simply added to the perovskite by an incipient wetness method. Thermal treatments that favor the exsolution process include calcination in air (e.g., 500 °C) and subsequent reduction in diluted H2 at 800 °C. These processes allow producing a two-phase material consisting of a Ruddlesden-Popper-type structure and a solid oxide solution e.g., α-Fe100-y-zCoyNizOx oxide. The formed electrocatalyst shows sufficient electronic conductivity under reducing environment at the Solid Oxide Fuel Cell (SOFC) anode. Outstanding catalytic properties are observed for the direct oxidation of dry fuels in SOFCs, including H2, methane, syngas, methanol, glycerol, and propane. This anode electrocatalyst can be combined with a full density electrolyte based on Gadolinia-doped ceria or with La0.8Sr0.2Ga0.8Mg0.2O3 (LSGM) or BaCe0.9Y0.1O3-δ (BYCO) to form a complete perovskite structure-based cell. Moreover, the exsolved perovskite can be used as a coating layer or catalytic pre-layer of a conventional Ni-YSZ anode. Beside the excellent catalytic activity, this material also shows proper durability and tolerance to sulfur poisoning. Research challenges and future directions are discussed. A new approach combining an exsolved perovskite and an NiCu alloy to further enhance the fuel flexibility of the composite catalyst is also considered. In this review, the preparation methods, physicochemical characteristics, and surface properties of exsoluted fine nanoparticles encapsulated on the metal-depleted perovskite, electrochemical properties for the direct oxidation of dry fuels, and related electrooxidation mechanisms are examined and discussed.