Fast gas chromatography-atmospheric pressure (photo)ionization mass spectrometry of polybrominated diphenylether flame retardants.

Gas chromatography (GC) and mass spectrometry (MS) are powerful, complementary techniques for the analysis of environmental toxicants. Currently, most GC-MS instruments employ electron ionization under vacuum, but the concept of coupling GC to atmospheric pressure ionization (API) is attracting revitalized interest. API conditions are inherently compatible with a wide range of ionization techniques as well high carrier gas flows that enable fast GC separations. This study reports on the application of atmospheric pressure chemical ionization (APCI) and a custom-built photoionization (APPI) source for the GC-MS analysis of polybrominated diphenyl ethers (PBDEs), a ubiquitous class of flame retardants. Photoionization of PBDEs resulted in the abundant formation of molecular ions M•+ with very little fragmentation. Some photo-oxidation was observed, which differentiated critical BDE isomers. Formation of protonated molecules [M+H]+ did not occur in GC-APPI because the ionization energy of H2O (clusters) exceeds the energy of the ionizing photons. Avoiding mixed-mode ionization is a major advantage of APPI over APCI, which requires careful control of the source conditions. A fast GC-API-MS method was developed using helium and nitrogen carrier gases that provides good separation of critical isomers (BDE-49/71) and elution of BDE 209 in less than 7 min (with He) and 15 min (with N2). It will be shown that the GC-APPI and GC-APCI methods match the sensitivity and improve upon the selectivity and throughput of established methods for the analysis of PBDEs using standard reference materials (NIST SRM 1944 and SRM 2585) and selected environmental samples.

Linking Natural Oil Seeps from the Gulf of Mexico to Their Origin by Use of Fourier Transform Ion Cyclotron Resonance Mass Spectrometry.

We report chemical characterization of natural oil seeps from the Gulf of Mexico by Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) and Gas Chromatography/Atmospheric Pressure Chemical Ionization Mass Spectrometry (GC/APCI-MS), to highlight how FT-ICR MS can also be employed as a means to determine petroleum connectivity, in addition to traditional GC/MS techniques. The source of petroleum is the Green Canyon (GC) 600 lease block in the Gulf of Mexico. Within GC600, two natural oil seepage zones, Mega Plume and Birthday Candles, continuously release hydrocarbons and develop persistent oil slicks at the sea surface above them. We chemically trace the petroleum from the surface oil slicks to the Mega Plume seep itself, and further to a petroleum reservoir 5 km away in lease block GC645 (Holstein Reservoir). We establish the connectivity between oil samples and confirm a common geological origin for the oil slicks, oil seep, and reservoir oil. The ratios of seven common petroleum biomarkers detected by GC/APCI-MS display clear similarity between the GC600 and GC645 samples, as well as a distinct difference from another reservoir oil collected ∼300 km away (Macondo crude oil from MC252 lease block). FT-ICR MS and principal component analysis (PCA) demonstrate further similarities between the GC600 and GC645 samples that distinctly differ from MC252. A common geographical origin is postulated for the GC600/GC645 samples, with petroleum migrating from the GC645 reservoir to the oil seeps found in GC600 and up through the water column to the sea surface as an oil slick.

Gas Chromatography/Atmospheric Pressure Chemical Ionization Tandem Mass Spectrometry for Fingerprinting the Macondo Oil Spill.

We report the first application of a new mass spectrometry technique (gas chromatography combined to atmospheric pressure chemical ionization tandem mass spectrometry, GC/APCI-MS/MS) for fingerprinting a crude oil and environmental samples from the largest accidental marine oil spill in history (the Macondo oil spill, the Gulf of Mexico, 2010). The fingerprinting of the oil spill is based on a trace analysis of petroleum biomarkers (steranes, diasteranes, and pentacyclic triterpanes) naturally occurring in crude oil. GC/APCI enables soft ionization of petroleum compounds that form abundant molecular ions without (or little) fragmentation. The ability to operate the instrument simultaneously in several tandem mass spectrometry (MS/MS) modes (e.g., full scan, product ion scan, reaction monitoring) significantly improves structural information content and sensitivity of analysis. For fingerprinting the oil spill, we constructed diagrams and conducted correlation studies that measure the similarity between environmental samples and enable us to differentiate the Macondo oil spill from other sources.

The Missing C1-C5 Cycloaromatization Reaction: Triplet State Antiaromaticity Relief and Self-Terminating Photorelease of Formaldehyde for Synthesis of Fulvenes from Enynes.

The last missing example of the four archetypical cycloaromatizations of enediynes and enynes was discovered by combining a twisted alkene excited state with a new self-terminating path for intramolecular conversion of diradicals into closed-shell products. Photoexcitation of aromatic enynes to a twisted alkene triplet state creates a unique stereoelectronic situation, which is facilitated by the relief of excited state antiaromaticity of the benzene ring. This enables the usually unfavorable 5-endo-trig cyclization and merges it with 5-exo-dig closure. The 1,4-diradical product of the C1-C5 cyclization undergoes internal H atom transfer that is coupled with the fragmentation of an exocyclic C-C bond. This sequence provides efficient access to benzofulvenes from enynes and expands the utility of self-terminating aromatizing enyne cascades to photochemical reactions. The key feature of this self-terminating reaction is that, despite the involvement of radical species in the key cyclization step, no external radical sources or quenchers are needed to provide the products. In these cascades, both radical centers are formed transiently and converted to the closed-shell products via intramolecular H-transfer and C-C bond fragmentation. Furthermore, incorporating C-C bond cleavage into the photochemical self-terminating cyclizations of enynes opens a new way for the use of alkenes as alkyne equivalents in organic synthesis.

Tetramethylammonium hydroxide as a reagent for complex mixture analysis by negative ion electrospray ionization mass spectrometry.

Ultrahigh-resolution Fourier transform ion cyclotron resonance mass spectrometry (FTICR MS) enables the direct characterization of complex mixtures without prior fractionation. High mass resolution can distinguish peaks separated by as little as 1.1 mDa), and high mass accuracy enables assignment of elemental compositions in mixtures that contain tens of thousands of individual components (crude oil). Negative electrospray ionization (ESI) is particularly useful for the speciation of the most acidic petroleum components that are implicated in oil production and processing problems. Here, we replace conventional ammonium hydroxide by tetramethylammonium hydroxide (TMAH, a much stronger base, with higher solubility in toluene) to more uniformly deprotonate acidic components of complex mixtures by negative ESI FTICR MS. The detailed compositional analysis of four crude oils (light to heavy, from different geographical locations) reveals that TMAH reagent accesses 1.5-6 times as many elemental compositions, spanning a much wider range of chemical classes than does NH4OH. For example, TMAH reagent produces abundant negative electrosprayed ions from less acidic and neutral species that are in low abundance or absent with NH4OH reagent. More importantly, the increased compositional coverage of TMAH-modified solvent systems maintains, or even surpasses, the compositional information for the most acidic species. The method is not limited to petroleum-derived materials and could be applied to the analysis of dissolved organic matter, coal, lipids, and other naturally occurring compositionally complex organic mixtures.

Charge reversal Fourier transform ion cyclotron resonance mass spectrometry.

We report the first charge reversal experiments performed by tandem-in-time rather than tandem-in-space MS/MS. Precursor odd-electron anions from fullerene C(60), and even-electron ions from 2,7-di-tert-butylfluorene-9-carboxylic acid and 3,3'-bicarbazole were converted into positive product ions ((-)CR(+)) inside the magnet of a Fourier transform ion cyclotron resonance mass spectrometer. Charge reversal was activated by irradiating precursor ions with high energy electrons or UV photons: the first reported use of those activation methods for charge reversal. We suggest that high energy electrons achieve charge reversal in one step as double electron transfer, whereas UV-activated (-)CR(+) takes place stepwise through two single electron transfers and formally corresponds to a neutralization-reionization ((-)NR(+)) experiment.

Compositional space boundaries for organic compounds.

An upper elemental compositional boundary for fossil hydrocarbons has previously been established as double-bond equivalents (i.e., DBE = rings plus double bonds) not exceeding 90% of the number of carbons. For heteroatom-containing fossil compounds, the 90% rule still applies if each N atom is counted as a C atom. The 90% rule eliminates more than 10% of the possible elemental compositions at a given mass for fossil database molecules. However, some synthetic compounds can fall outside the upper boundary defined for naturally occurring compounds. Their inclusion defines an "absolute" upper boundary as DBE (rings plus double bonds to carbon) equal to carbon number plus one, and applies to all organic compounds including fullerenes and other molecules containing no hydrogen. Finally, the DBE definition can fail for molecules with particular atomic valences. Therefore, we also present a generalized DBE definition that includes atomic valence to enable calculation of the correct total number of rings, double bonds, and triple bonds for heteroatom-containing compounds.

Cyclization of the substituted N-(ortho-cyclopropylphenyl)-N'-aryl ureas and thioureas in the gas phase and solution.

Electron ionization (EI), chemical ionization (CI), tandem mass spectrometry, high-resolution measurements, and labeling studies as well as quantum chemical calculations were used to understand the behavior of the molecular radical cations (EI) and protonated molecules (CI) of substituted N-(ortho-cyclopropylphenyl)-N'-aryl ureas and N-(ortho-cyclopropylphenyl)-N'-aryl thioureas in a mass spectrometer. Fragmentation schemes and possible mechanisms of primary isomerization were proposed. According to the fragmentation pattern, formation of the corresponding benzoxazines and benzothiazines was considered as the major process of isomerization of the original M(+.) and MH(+), although some portions of these ions definitely transformed into other structures. The treatment of N-(ortho-cyclopropylphenyl)-N'-phenyl urea and N-(ortho-cyclopropylphenyl)-N'-phenylthiourea in solution with strong acids formed predicted 4-ethyl-N-phenyl-4H-3,1-benzoxazin-2-amin and 4-ethyl-N-phenyl-4H-3,1-benzothiazin-2-amine as principal products.

Cyclization of N,N-dialkylditiocarbamate and alkylxanthate derivatives of polyhalogenated pyridines in gas and liquid phases.

The intramolecular cyclization of 31 polyhalogen substituted pyridines containing N,N-dialkyldithiocarbamate or alkylxanthate groups has been compared in reaction in solution with sodium N,N-dialkyldithiocarbamates or potassium carbetoxydithiolate and in the gas phase under electron ionization (EI). The scheme of fragmentation of the studied compounds has been proposed. An influence of the nature of leaving groups (Cl, F, CF(3), CN, COOEt), of the presence of electron withdrawing groups (Cl, F, CN, CCl(3), CF(3), COOEt) in ortho-,meta or para-positions to the leaving halogen, of the position of a dithio group toward pyridine nitrogen atom and of the role of oxygen and nitrogen in corresponding alkylxanthates and N,N-dialkyldithiocarbamates on the cyclization process has been investigated.