Comparison of the timing of development of immunity in Romney lambs from resistant and resilient selection lines.

Variation in the timing of development of immunity to gastro-intestinal nematode parasites was assessed in resistant and resilient Romney selection lines exposed to mixed natural infection. From weaning, at mean 92 days-of-age, animals (n = 53) were sampled for faecal egg count (FEC) expressed as eggs per gram of faeces (epg), saliva for immunoglobulin (IgG and IgA) determination and fasted live weight (LW) every 10 days until 351 days-of-age. Overall, mean back-transformed FEC were consistently low for resistant animals (<200 epg) whereas resilient counterparts' FEC increased with time to reach a peak of 1400 epg at day 230 for females and 1800 epg for males at day 280 before declining to less than 500 epg by day 300, respectively (P < 0.001). Resistant lambs reached a threshold for Trichostrongylus colubriformis L3-specific IgG which was indicative of the presence of immunity earlier at 220.6 ± 8.8 days-of-age compared with resilient-line animals which reach this threshold 40 days later at 263.4 ± 6.9 days-of-age (P < 0.001). In addition, resistant females reached sexual maturity earlier compared with their resilient counterparts viz. 263.5 ± 3.7 c.f. 274.4 ± 3.4 days-of-age, respectively, (P = 0.048). Mean fasted live weight (LW) showed a selection line by time interaction (P < 0.001) which reflected greater LW in the early phase of the study in resilient males but increasing for all groups until day 280 before declining and being similar for all groups from day 330. In summary, differences appear to exist in the timing of immune development between these Romney lines, with resistant animals developing immunity earlier and these resistant-line animals also appear to be more physiologically mature at the same chronological age than resilient animals. These observations have implications on the timing of identification and selection of resistant animals.

Effects of feed intake and genetics on tissue nitrogen-15 enrichment and feed conversion efficiency in sheep.

This study investigated the effects of sheep genetics and feed intake on nitrogen isotopic fractionation (ΔN) and feed conversion efficiency (FCE; live weight gain/DMI), using a 2 × 2 factorial design, with 2 levels of genetic merit for growth (high vs. low) and 2 levels of feed intake (110 vs. 170% of ME for maintenance [MEm]). No effect of genetic merit was detected for live weight gain ( = 0.64), FCE ( = 0.46), plasma urea nitrogen ( = 0.52), plasma glucose ( = 0.78), and ΔN of wool ( = 0.45), blood ( = 0.09), and plasma ( = 0.51). Sheep receiving 170% of MEm had 175% higher live weight gain ( < 0.001) and 77% higher FCE ( < 0.001) than sheep receiving 110% of MEm. There was no difference among treatments at the beginning of the study for either blood or plasma ∆N, but the treatment groups started to diverge in blood and plasma ∆N at 21 and 7 d, respectively. Blood, plasma, and wool samples were enriched in N compared with feed. There was a higher blood, plasma, and wool ∆N for the low feed intake group than the high feed intake group ( < 0.001 in all cases). Across the 4 treatment groups, higher FCE in sheep was associated with lower ∆N for plasma, blood, and wool. Overall, the results are consistent with the potential of ∆N as a rapid, low-cost biomarker of FCE in sheep, despite there being no effects of genetic treatment on FCE and ∆N.

Investigation of the medium-term effects of Olibratrade mark fat emulsion on food intake in non-obese subjects.

OBJECTIVE: To investigate the effect of Olibra fat emulsion on medium-term food intake and appetite in non-obese subjects. DESIGN: Double-blind, placebo-controlled, within-subject crossover. SETTING: University of Ulster, Coleraine. SUBJECTS: A total of 28 subjects (14 male, 14 female). INTERVENTIONS: Subjects were randomly assigned to receive either a 200 g portion of test (5 g of Olibra fat) or control (5 g milk fat) yoghurt for breakfast for 2 x 3 week 'study' phases, separated by a 3-week 'wash-out' phase. On days 1, 8 and 22 of the study phases, food intake 4 h post-consumption of the yoghurt was assessed by pre- and post-covert weighing at an ad libitum buffet-style test lunch. Throughout each of these study days, appetite was assessed using visual analogue scales (VAS) at regular intervals. For the remainder of the study days, and the following 24 h ('post-study days'), subjects reported their food intake using weighed dietary records. RESULTS: Consumption of the Olibra emulsion had no significant effect on mean energy, macronutrient or amounts of food consumed at the lunch 4 h post-consumption. Self-reported food intakes indicated that there was no significant effect of the emulsion on energy intakes for the remainder of each study day and post-study days. There was considerable individual variation in food intakes following consumption of the Olibra emulsion, with 46, 59 and 57% of subjects reducing their energy intakes at lunch on days 1, 8 and 22. There was no consistent effect of the emulsion on appetite ratings. CONCLUSIONS: In contrast to earlier studies, there was no evidence of a short- or medium-term effect of the Olibra emulsion on food intake or appetite. This could be owing to numerous confounding factors influencing eating behaviour and/or the different study design used in the present study.

Regional variations in the nematode worm populations of breeding ewes in New Zealand.

AIM: To determine whether the generic composition of nematode parasites in lactating ewes varies between geographic regions in New Zealand and whether age and fecundity of ewes affect nematode egg output. METHODS: Four ram breeding properties in each of the northern (NNI) and southern (SNI) North Island and the northern South Island (NSI) regions, together with six properties in the southern South Island (SSI) were investigated. Faecal samples were obtained on one occasion, 2-6 weeks after lambing, from at least 60 ewes on each property, stratified according to age and reproductive status. Nematode eggs were counted and coprocultures prepared to identify genera present. Information on the history of anthelmintic use on each property was also collected. RESULTS: Highest faecal egg counts (FEC) were observed from ewes in the NNI and SSI regions. Lambed hoggets and twin-rearing two-tooth ewes had higher FEC than their unlambed or single-lamb-rearing contemporaries, respectively. However, no significant effect of reproductive effort on FEC was demonstrated in mixed-aged ewes. Significant regional differences in generic composition of nematode parasites were observed: Teladorsagia spp (also referred to as Ostertagia spp) eggs made up 56% of total eggs shed from sheep in the SSI compared with14% in the NNI, and values for Haemonchus spp were 1%and 24% for these same regions, respectively. Trichostrongylus colubriformis and T. vitrinus together made up 7, 15, 13 and15% of eggs counted from sheep in the SSI, NSI, SNI and NNI, respectively. CONCLUSIONS: More comprehensive epidemiological information may suggest regional-specific approaches to the management of nematode parasites in ewes should be devised in the future.

Blurring artifacts in megavoltage radiography with a flat-panel imaging system: comparison of Monte Carlo simulations with measurements.

Originally designed for use at medical-imaging x-ray energies, imaging systems comprising scintillating screens and amorphous Si detectors are also used at the megavoltage photon energies typical of portal imaging and industrial radiography. While image blur at medical-imaging x-ray energies is strongly influenced both by K-shell fluorescence and by the transport of optical photons within the scintillator layer, at higher photon energies the image blur is dominated by radiation scattered from the detector housing and internal support structures. We use Monte Carlo methods to study the blurring in a notional detector: a series of semi-infinite layers with material compositions, thicknesses, and densities similar to those of a commercially available flat-panel amorphous Si detector system comprising a protective housing, a gadolinium oxysulfide scintillator screen, and associated electronics. We find that the image blurring, as described by a point-spread function (PSF), has three length scales. The first component, with a submillimeter length scale, arises from electron scatter within the scintillator and detection electronics. The second component, with a millimeter-to-centimeter length scale, arises from electrons produced in the front cover of the detector. The third component, with a length scale of tens of centimeters, arises from photon scatter by the back cover of the detector. The relative contributions of each of these components to the overall PSF vary with incident photon energy. We present an algorithm that includes the energy-dependent sensitivity and energy-dependent PSF within a ray-tracing formalism. We find quantitative agreement (approximately 2%) between predicted radiographs with radiographs of copper step wedges, taken with a 9 MV bremsstrahlung source and a commercially available flat-panel system. The measured radiographs show the blurring artifacts expected from both the millimeter-scale electron transport and from the tens-of-centimeters length scale arising from the scattered photon transport. Calculations indicate that neglect of the energy-dependent blurring would lead to discrepancies in the apparent transmission of these wedges of the order of 9%.

Using a tungsten rollbar to characterize the source spot of a megavoltage bremsstrahlung linac.

In photon teletherapy, the size and functional form of the photon source spot affect both the sharpness of the penumbra of treatment fields and the sharpness of portal images. Photon source spot parameters are also used in photon teletherapy dose calculation codes. A simple method for characterizing the source spot would complement the existing, more involved methods that have been described in the medical physics literature. Such a method, using a rollbar made of tungsten or other high-Z metal, is used in industrial radiography. We describe the use of a tungsten rollbar for characterizing the source spot edge spread function (and thereby the source spot size and shape) of a megavoltage bremsstrahlung photon source. We use Monte Carlo simulations to quantify anticipated experimental artifacts of the method, assuming typical spot sizes for circ-function, Gaussian, and Bennett line shapes. We illustrate the use of the rollbar method by characterizing the source spot of a typical 9 MV linac used for industrial radiography. The source spot is analyzed using two approaches: (a) fitting the rollbar image with analytic functions and (b) using Abel inversion to obtain the cylindrically symmetric spot profile consistent with the measured rollbar image. Monte Carlo simulations, based on a 6 MV photon teletherapy accelerator, suggest that aspects of the method are applicable to medical bremsstrahlung sources.