Biodegradable Water-Soluble Matrix for Immobilization of Biocidal 4-Hexylresorcinol.

Biocidal coatings have been used in biomedicine, cosmetology and the food industry. In this article, the coatings are described as being composed of non-stoichiometric polycomplexes, products of electrostatic coupling of two commercial biodegradable ionic polymers, anionic sodium alginate and cationic quaternized hydroxyethyl cellulose ethoxylate. Non-stoichiometric polycomplexes with a 5-fold excess of the cationic polymer were used for immobilizing hydrophobic biocidal 4-hexylresorcinol (HR). Being dispersed in water, the polycomplex particles were capable of absorbing a tenfold excess of HR in relation to the polycation. After deposition onto the plastic surface and drying, the aqueous polycomplex-HR composite formulation forms a transparent homogeneous coating, which swells slightly in water. The interpolyelectrolyte complex (IPEC) is substantially non-toxic. The incorporation of HR in the IPEC imparts antimicrobial activity to the resulting composite, in both aqueous solutions and coatings, against Gram-negative and Gram-positive bacteria and yeast. The polysaccharide-based polycomplexes with embedded HR are promising for the fabrication of biocidal films and coatings.

Crude Oil Degradation in Temperatures Below the Freezing Point by Bacteria from Hydrocarbon-Contaminated Arctic Soils and the Genome Analysis of Sphingomonas sp. AR_OL41.

Intensive human activity in the Arctic region leads to hydrocarbon pollution of reservoirs and soils. Isolation of bacteria capable of growing at low temperatures and degrading oil and petroleum products is of scientific and practical value. The aim of this work was to study the physiology and growth in oil at temperatures below 0 °C of four strains of bacteria of the genera Pseudomonas, Rhodococcus, Arthrobacter, and Sphingomonas-previously isolated from diesel-contaminated soils of the Franz Josef Land archipelago-as well as genomic analysis of the Sphingomonas sp. AR_OL41 strain. The studied strains grew on hydrocarbons at temperatures from -1.5 °C to 35 °C in the presence of 0-8% NaCl (w/v). Growth at a negative temperature was accompanied by visual changes in the size of cells as well as a narrowing of the spectrum of utilized n-alkanes. The studied strains were psychrotolerant, degraded natural biopolymers (xylan, chitin) and n-alkanes of petroleum, and converted phosphates into a soluble form. The ability to degrade n-alkanes is rare in members of the genus Sphingomonas. To understand how the Sphingomonas sp. AR_OL41 strain has adapted to a cold, diesel-contaminated environment, its genome was sequenced and analyzed. The Illumina HiSeq 2500 platform was used for AR_OL41 genome strain sequencing. The genome analysis of the AR_OL41 strain showed the presence of genes encoding enzymes of n-alkane oxidation, pyruvate metabolism, desaturation of membrane lipids, and the formation of exopolysaccharides, confirming the adaptation of the strain to hydrocarbon pollution and low habitat temperature. Average nucleotide identity and digital DNA-DNA hybridization values for genomes of the AR_OL41 strain with that of the phylogenetically relative Sphingomonas alpine DSM 22537T strain were 81.9% and 20.9%, respectively, which allows the AR_OL41 strain to be assigned to a new species of the genus Sphingomonas. Phenomenological observations and genomic analysis indicate the possible participation of the studied strains in the self-purification of Arctic soils from hydrocarbons and their potential for biotechnological application in bioremediation of low-temperature environments.

Biodegradable Interpolycomplexes for Anti-Erosion Stabilization of Soil and Sand.

A linear anionic polysaccharide, sodium alginate, electrostatically interacts with a cationic polysaccharide, quaternized hydroxyethyl cellulose ethoxylate, in aqueous solution, thus giving an interpolyelectrolyte complex. Aqueous solutions of the initial polysaccharides and polycomplexes with an excess of the cationic or anionic polymers were used for the stabilization of soil and sand against water erosion. Physicochemical, mechanical and biological properties of the polymers and coatings were characterized by gravimetric analysis, viscosimetry, mechanical strength assessment, cell viability, and cell-mediated degradation with the following main conclusions. (a) Non-stoichiometric polycomplexes with an excess of cationic or anionic units ("cationic" and "anionic" polycomplexes, respectively) form transparent solutions or stable-in-time dispersions. (b) The complexation results in a decrease in the viscosity of polymer solutions. (c) A complete dissociation of polycomplexes to the initial components is achieved in a 0.2 M NaCl solution. (d) Soil/sand treatment with 1 wt% aqueous solutions of polymers or polycomplexes and further drying lead to the formation of strong composite coatings from polymer(s) and soil/sand particles. (e) Cationic polycomplexes form stronger coatings in comparison with anionic polycomplexes. (f) The polymer-soil coatings are stable towards re-watering, while the polymer-sand coatings show a much lower resistance to water. (g) The individual polysaccharides demonstrate a negligible toxicity to Gram-negative and Gram-positive bacteria and yeast. (h) The addition of Bacillus subtilis culture initiates the degradation of the polysaccharides and polycomplexes. (i) Films from polysaccharides and polycomplexes decompose down to small fragments after being in soil for 6 weeks. The results of the work are of importance for constructing water-resistant, low toxicity and biodegradable protective coatings for soil and sand.

Building a Cell House from Cellulose: The Case of the Soil Acidobacterium Acidisarcina polymorpha SBC82T.

Acidisarcina polymorpha SBC82T is a recently described representative of the phylum Acidobacteriota from lichen-covered tundra soil. Cells of this bacterium occur within unusual saccular chambers, with the chamber envelope formed by tightly packed fibrils. These extracellular structures were most pronounced in old cultures of strain SBC82T and were organized in cluster-like aggregates. The latter were efficiently destroyed by incubating cell suspensions with cellulase, thus suggesting that they were composed of cellulose. The diffraction pattern obtained for 45-day-old cultures of strain SBC82T by using small angle X-ray scattering was similar to those reported earlier for mature wood samples. The genome analysis revealed the presence of a cellulose biosynthesis locus bcs. Cellulose synthase key subunits A and B were encoded by the bcsAB gene whose close homologs are found in genomes of many members of the order Acidobacteriales. More distant homologs of the acidobacterial bcsAB occurred in representatives of the Proteobacteria. A unique feature of bcs locus in strain SBC82T was the non-orthologous displacement of the bcsZ gene, which encodes the GH8 family glycosidase with a GH5 family gene. Presumably, these cellulose-made extracellular structures produced by A. polymorpha have a protective function and ensure the survival of this acidobacterium in habitats with harsh environmental conditions.

Biocidal Coatings from Complexes of Carboxylated Latex Particles and a Linear Cationic Polymer.

A linear polycation, poly(diallyldimethylammonium chloride), electrostatically interacts with anionic latex particles from a carboxylated butadiene-styrene copolymer in aqueous solution thus forming an interpolyelectrolyte complex. A mutual neutralization of oppositely charged latex and polycation groups occurs at W = latex/polycation = 50 w/w ratio. At W = 27, an ultimate polycation adsorption is reached, resulting in the formation of positive polycomplex particles, while at W ˂ 27, two-component systems are formed composed of positive polycomplex particles and free polycation. A film created from the W = 12 formulation shows a high toxicity to Gram-positive and Gram-negative bacteria and yeast. Repeated washing the film leads to partial removal of polycation and a 50% decrease in the activity of the film only towards Gram-negative Pseudomonas aeruginosa. The results indicate the potential for use of the mixed polymer formulations for the fabrication of antimicrobial films and coatings.

Sulfidogenic Microbial Communities of the Uzen High-Temperature Oil Field in Kazakhstan.

Application of seawater for secondary oil recovery stimulates the development of sulfidogenic bacteria in the oil field leading to microbially influenced corrosion of steel equipment, oil souring, and environmental issues. The aim of this work was to investigate potential sulfide producers in the high-temperature Uzen oil field (Republic of Kazakhstan) exploited with seawater flooding and the possibility of suppressing growth of sulfidogens in both planktonic and biofilm forms. Approaches used in the study included 16S rRNA and dsrAB gene sequencing, scanning electron microscopy, and culture-based techniques. Thermophilic hydrogenotrophic methanogens of the genus Methanothermococcus (phylum Euryarchaeota) predominated in water from the zone not affected by seawater flooding. Methanogens were accompanied by fermentative bacteria of the genera Thermovirga, Defliviitoga, Geotoga, and Thermosipho (phylum Thermotogae), which are potential thiosulfate- or/and sulfur-reducers. In the sulfate- and sulfide-rich formation water, the share of Desulfonauticus sulfate-reducing bacteria (SRB) increased. Thermodesulforhabdus, Thermodesulfobacterium, Desulfotomaculum, Desulfovibrio, and Desulfoglaeba were also detected. Mesophilic denitrifying bacteria of the genera Marinobacter, Halomonas, and Pelobacter inhabited the near-bottom zone of injection wells. Nitrate did not suppress sulfidogenesis in mesophilic enrichments because denitrifiers reduced nitrate to dinitrogen; however, thermophilic denitrifiers produced nitrite, an inhibitor of SRB. Enrichments and a pure culture Desulfovibrio alaskensis Kaz19 formed biofilms highly resistant to biocides. Our results suggest that seawater injection and temperature of the environment determine the composition and functional activity of prokaryotes in the Uzen oil field.