Stability of Plasmonic Mg-MgO Core-Shell Nanoparticles in Gas-Phase Oxidative Environments.

Magnesium is a recent addition to the plasmonic toolbox: nanomaterials that efficiently utilize photons' energy due to their ability to sustain localized surface plasmon resonances. Magnesium nanoparticles protected by a native oxide shell can efficiently absorb light across the solar spectrum, making them a promising photocatalytic material. However, their inherent reactivity toward oxidation may limit the number of reactions in which Mg-MgO can be used. Here, we investigate the stability of plasmonic Mg-MgO core-shell nanoplates under oxidative conditions. We demonstrate that the MgO shell stabilizes the metallic Mg core against oxidation in air at up to 400 °C. Furthermore, we show that the reactivity of Mg-MgO nanoplates with water vapor (3.5 vol % in N2) decreases with temperature, with no oxidation of the Mg core detected from 200 to 400 °C. This work unravels the potential of Mg-MgO nanoparticles for a broad range of catalytic transformations occurring in oxidative environments.

Capping Agents Enable Well-Dispersed and Colloidally Stable Metallic Magnesium Nanoparticles.

Mg nanoparticles are an emerging plasmonic material due to Mg's abundance and ability to sustain size- and shape-dependent localized surface plasmon resonances across a broad range of wavelengths from the ultraviolet to the near infrared. However, Mg nanoparticles are colloidally unstable due to their tendency to aggregate and sediment. Nanoparticle aggregation can be inhibited by the addition of capping agents that impart surface charges or steric repulsion. Here, we report that the common capping agents poly(vinyl) pyrrolidone (PVP), polyethylene glycol (PEG), cetyltrimethylammonium bromide (CTAB), and sodium dodecyl sulfate (SDS) interact differently and have varied effects on the aggregation and colloidal stability of Mg nanoparticles. Nanoparticles synthesized in the presence of PVP showed improvements in colloidal stability and reduced aggregation, as observed by electron microscopy and optical spectroscopy. The binding of PVP was confirmed through infrared and X-ray photoelectron spectroscopy. The influence of PVP on the reduction of di-n-butyl magnesium was evaluated through analysis of particle size distribution and Mg yield as a function of reaction time, reducing agent, and temperature. Furthermore, the presence of PVP drastically changes the growth pattern of metallic Mg structures obtained from the reduction of the Grignard reagents butylmagnesium chloride and phenylmagnesium chloride by lithium naphthalenide: large polycrystalline aggregates and well-separated faceted nanoparticles grow without and with PVP, respectively. This study provides new synthetic routes that generate colloidally stable and well-dispersed Mg nanoparticles for plasmonic and other applications.

Plasmonic Magnesium Nanoparticles Are Efficient Nanoheaters.

Understanding and guiding light at the nanoscale can significantly impact society, for instance, by facilitating the development of efficient, sustainable, and/or cost-effective technologies. One emergent branch of nanotechnology exploits the conversion of light into heat, where heat is subsequently harnessed for various applications including therapeutics, heat-driven chemistries, and solar heating. Gold nanoparticles are overwhelmingly the most common material for plasmon-assisted photothermal applications; yet magnesium nanoparticles present a compelling alternative due to their low cost and superior biocompatibility. Herein, we measured the heat generated and quantified the photothermal efficiency of the gold and magnesium nanoparticle suspensions. Photothermal transduction experiments and optical and thermal simulations of different sizes and shapes of gold and magnesium nanoparticles showed that magnesium is more efficient at converting light into heat compared to gold at near-infrared wavelengths, thus demonstrating that magnesium nanoparticles are a promising new class of inexpensive, biodegradable photothermal platforms.

Tip-Enhanced Raman Imaging of Plasmon-Driven Coupling of 4-Nitrobenzenethiol on Au-Decorated Magnesium Nanostructures.

Magnesium nanoparticles (MgNPs) exhibit localized surface plasmon resonances across the ultraviolet, visible, and near-infrared parts of electromagnetic spectrum and are attracting increasing interest due to their sustainability and biocompatibility. In this study, we used tip-enhanced Raman spectroscopy (TERS) to examine the photocatalytic properties of MgNP protected by a thin native oxide layer and their Au-modified bimetallic analogs produced by partial galvanic replacement, Au-MgNPs. We found no reduction of 4-nitrobenzenethiol (4-NBT) to p,p'-dimercaptoazobisbenzene (DMAB) when a Au-coated tip was placed in contact with a self-assembled monolayer of 4-NBT molecules adsorbed on MgNPs alone. However, decorating Mg with Au made these bimetallic structures catalytically active. The DMAB signal signature of photocatalytic activity was more delocalized around AuNPs attached to Mg than around AuNPs on a Si substrate, indicating coupling between the Mg core and Au decorations. This report on photocatalytic activity of a bimetallic structure including plasmonic Mg paves the way for further catalyst architectures benefiting from Mg's versatility and abundance.

Seed-mediated synthesis of monodisperse plasmonic magnesium nanoparticles.

We reduce di-n-butylmagnesium with arene (naphthalene, biphenyl, phenanthrene) radical anions and dianions to obtain metallic, plasmonic Mg nanoparticles. Their size and shape depends on the dianion concentration and reduction potential. Based on these results, we demonstrate a seeded growth Mg nanoparticle synthesis and report homogeneous shapes with controllable monodisperse size distributions.

Plasmonic magnesium nanoparticles decorated with palladium catalyze thermal and light-driven hydrogenation of acetylene.

Bimetallic Pd-Mg nanoparticles were synthesized by partial galvanic replacement of plasmonic Mg nanoparticles, and their catalytic and photocatalytic properties in selective hydrogenation of acetylene have been investigated. Electron probe studies confirm that the Mg-Pd structures mainly consist of metallic Mg and sustain several localized plasmon resonances across a broad wavelength range. We demonstrate that, even without light excitation, the Pd-Mg nanostructures exhibit an excellent catalytic activity with selectivity to ethylene of 55% at 100% acetylene conversion achieved at 60 °C. With laser excitation at room temperature over a range of intensities and wavelengths, the initial reaction rate increased up to 40 times with respect to dark conditions and a 2-fold decrease of the apparent activation energy was observed. A significant wavelength-dependent change in hydrogenation kinetics strongly supports a catalytic behavior affected by plasmon excitation. This report of coupling between Mg's plasmonic and Pd's catalytic properties paves the way for sustainable catalytic structures for challenging, industrially relevant selective hydrogenation processes.

Solvent effects on the kinetics of 4-nitrophenol reduction by NaBH4 in the presence of Ag and Au nanoparticles.

The reduction of 4-nitrophenol (4-NiP) to 4-aminophenol (4-AP) with an excess of sodium borohydride is commonly used as a model reaction to assess the catalytic activity of metallic nanoparticles. This reaction is considered both a potentially important step in industrial water treatment and an attractive, commercially relevant synthetic pathway. Surprisingly, an important factor, the role of the reaction medium on the reduction performance, has so far been overlooked. Here, we report a pronounced effect of the solvent on the reaction kinetics in the presence of silver and gold nanoparticles. We demonstrate that the addition of methanol, ethanol, or isopropanol to the reaction mixture leads to a dramatic decrease in the reaction rate. For typical concentrations of reactants, the reduction is completely suppressed in the presence of 50 vol% alcohols. 4-NiP reduction rate in aqueous alcohol mixtures can, however, be improved noticeably by increasing the borohydride concentration or the reaction temperature. The analysis of various factors responsible for solvent effects reveals that the decrease in the reduction rate in the presence of alcohols is related, amongst others, to a substantially higher oxygen solubility in alcohols compared to water. The results of this work show that the effects of solvent properties on reaction kinetics must be considered for unambiguous comparison and optimization of the catalytic performance of metallic nanoparticles in the liquid phase 4-NiP reduction.