ABSTRACT
Electrochemical processing of spent nuclear fuel in molten chloride salts results in radioactive salt waste. Chlorine removal from the salt has been identified as an effective and efficient first step in the management of high-level waste. In this work, a simple salt was dechlorinated with a phosphoric acid phosphate precursor, resulting in a glassy dechlorinated product. The dechlorination efficacy was evaluated in air and argon environments. This work serves as an initial step to advance the Technological Readiness Level of H3PO4-based dechlorination step toward implementation of iron phosphate waste forms to immobilize electrochemical fuel reprocessing salt waste streams.
ABSTRACT
This paper describes an apparatus used to remove chlorine from chloride salt-based nuclear wastes from electrochemical reprocessing and/or chloride-based molten salt reactors (MSRs) through dechlorination by reacting the salts with ammonium dihydrogen phosphate (NH4H2PO4 or ADP) at temperatures up to 600 °C to produce NH4Cl as a byproduct. The benefits of removing the Cl from these salts include 37Cl recovery from Cl-based MSR salts, formation of UCl3 from the NH4Cl, as well as removal of Cl from the salts and conversion of the salt cations to oxides to allow for immobilization in a chemically durable iron phosphate waste form. This generation-2 system is an improvement over the generation-1 system and provides a means for scaling up salt throughput as well as NH4Cl recovery. The generation-2 system includes a five-zone furnace so the temperature of the four-zone gradient furnace can be tailored to control the location of NH4Cl condensation on a four-piece fused quartz off-gas system. Both ADP and NH4Cl decomposition reactions include the production of NH3 and acids (i.e., H3PO4 and HCl, respectively), so careful temperature control is needed during the ADP-salt reactions to maximize the NH4Cl production and minimize NH4Cl decomposition. In two sets of experiments run in the generation-1 and generation-2 apparatuses, NH4Cl yields were ≥5.5-fold higher for the new system compared to the original prototype system and the batch sizes can be ≥2.5-fold higher. In addition, some thermodynamic experiments evaluating the reactions of ADP + KCl as well as decomposition of pure NH4Cl were performed to assess the temperatures of the reactions and identify off-gas products.
ABSTRACT
A novel photothermal process to spatially modulate the concentration of sub-wavelength, high-index nanocrystals in a multicomponent Ge-As-Pb-Se chalcogenide glass thin film resulting in an optically functional infrared grating is demonstrated. The process results in the formation of an optical nanocomposite possessing ultralow dispersion over unprecedented bandwidth. The spatially tailored index and dispersion modification enables creation of arbitrary refractive index gradients. Sub-bandgap laser exposure generates a Pb-rich amorphous phase transforming on heat treatment to high-index crystal phases. Spatially varying nanocrystal density is controlled by laser dose and is correlated to index change, yielding local index modification to ≈+0.1 in the mid-infrared.
