ABSTRACT
We demonstrated a compact and efficient Ho:YAG slab laser intra-cavity pumped by a Tm:YLF slab laser for the first time. In the Tm:YLF laser operation, the maximum power of 32.1 W with optical-to-optical efficiency of 52.8% was obtained. In the intra-cavity pumped Ho:YAG laser operation, the output power of 12.7 W at 2122â nm was obtained. The beam quality factors M2 in the vertical and horizontal directions were 1.22 and 1.11, respectively. The RMS instability was measured to be lower than 0.1%. To the best of our knowledge, this was the maximum power for the Tm-doped laser intra-cavity pumped Ho-doped laser with near-diffraction-limited beam quality.
ABSTRACT
We demonstrate a compact and efficient Ho:YLF slab laser that is pumped by a self-made Tm:YAP slab laser. The maximum output power of 125 W at 2064 nm was obtained with the incident pump power of 245 W. To the best of our knowledge, this is the first report for an Ho:YLF laser oscillator to reach hundred-watts-level output power. The slope efficiency with respect to the incident pump power was 62.5%, and the optical-to-optical conversion efficiency was 51%. The RMS instability of the maximum output power was measured to be 0.24% in 30 min. The beam quality factors M2 were 475 and 1.59 in the x and y directions, respectively.
ABSTRACT
All-fiber integrated phase shifters and optical switches have important applications in photonic devices, such as optical controlling, optical fiber sensing, and signal processing. In this Letter, for the first time to the best of our knowledge, we integrated the photothermal effect of a nanomaterial based on gold nanorods (GNRs) and a microfiber interferometer to realize a compact all-optical fiber phase shifter. GNRs surrounding the microfiber were excited by near-infrared light via the evanescent interaction, subsequently releasing the heat through the photothermal effect. Then, the refractive index around the microfiber was varied to shift the interference dips in a reversible manner. Experimentally, a spectral shift efficiency of 0.16 nm/mW near the wavelength of 1550 nm was obtained using an excitation laser at the wavelength of 808 nm. The device also provided an all-optical switching with the modulation depth of 76.4%. The proposed GNR-based all-fiber device can provide high potentials in all-optical signal control applications.
ABSTRACT
We demonstrate a novel integrated optical fiber interferometer for in-fiber optofluidic detection. It is composed of a specially designed hollow optical fiber with a micro-channel and two cores. One core on the inner surface of the micro-channel is served as sensing arm and the other core in the annular cladding is served as reference arm. Fusion-and-tapering method is employed to couple light from a single mode fiber to the hollow optical fiber in this device. Sampling is realized by side opening a microhole on the surface of the hollow optical fiber. Under differential pressure between the end of the hollow fiber and the microhole, the liquids can form steady microflows in the micro-channel. Simultaneously, the interference spectrum of the interferometer device shifts with the variation of the concentration of the microfluid in the channel. The optofluidic in-fiber interferometer has a sensitivity of refractive index around 2508 nm/RIU for NaCl. For medicine concentration detection, its sensitivity is 0.076 nm/mmolL-1 for ascorbic acid. Significantly, this work presents a compact microfluidic in-fiber interferometer with a micro-channel which can be integrated with chip devices without spatial optical coupling and without complex manufacturing procedure of the waveguide on the chips.
