Tooth wear and bruxism: A scoping review.

OBJECTIVE: This study presents a scoping review to determine the association between tooth wear and bruxism. DATA: A protocol was developed a priori (Open Science Framework (DOI 10.17605/OSF.IO/CS7JX)). Established scoping review methods were used for screening, data extraction, and synthesis. Risk of bias was assessed using JBI tools. Direct associations between tooth wear and bruxism were assessed. SOURCES: Embase, SCOPUS, Web of Science, Cochrane, and PubMed were searched. STUDY SELECTION: Any clinical study containing tooth wear and bruxism assessment done on humans in any language was included. Animal, in-vitro studies and case reports were excluded. CONCLUSIONS: Thirty publications reporting on the association between tooth wear and bruxism were included. The majority of publications were cross-sectional studies (90%) while only three were longitudinal (10%). Eleven papers assessed definitive bruxism for analysis (instrumental tools), one paper assessed probable bruxism (clinical inspection with self-report) and eighteen assessed possible bruxism (self-report). Of the eleven papers assessing definitive bruxism, eight also reported outcomes of non-instrumental tools. Tooth wear was mostly scored using indexes. Most studies reported no or weak associations between tooth wear and bruxism, except for the studies done on cervical tooth wear. When bruxism assessment was done through self-report, more often an association was found. Studies using multivariate analyses did not find an association between tooth wear and bruxism, except the cervical wear studies. Evidence shows inconclusive results as to whether bruxism and tooth wear are related or not. Therefore, well-designed longitudinal trials are needed to address this gap in the literature. CLINICAL SIGNIFICANCE: Based on the evidence, dental clinicians should not infer bruxism activity solely on the presence of tooth wear.

Combining public datasets for automated tooth assessment in panoramic radiographs.

OBJECTIVE: Panoramic radiographs (PRs) provide a comprehensive view of the oral and maxillofacial region and are used routinely to assess dental and osseous pathologies. Artificial intelligence (AI) can be used to improve the diagnostic accuracy of PRs compared to bitewings and periapical radiographs. This study aimed to evaluate the advantages and challenges of using publicly available datasets in dental AI research, focusing on solving the novel task of predicting tooth segmentations, FDI numbers, and tooth diagnoses, simultaneously. MATERIALS AND METHODS: Datasets from the OdontoAI platform (tooth instance segmentations) and the DENTEX challenge (tooth bounding boxes with associated diagnoses) were combined to develop a two-stage AI model. The first stage implemented tooth instance segmentation with FDI numbering and extracted regions of interest around each tooth segmentation, whereafter the second stage implemented multi-label classification to detect dental caries, impacted teeth, and periapical lesions in PRs. The performance of the automated tooth segmentation algorithm was evaluated using a free-response receiver-operating-characteristics (FROC) curve and mean average precision (mAP) metrics. The diagnostic accuracy of detection and classification of dental pathology was evaluated with ROC curves and F1 and AUC metrics. RESULTS: The two-stage AI model achieved high accuracy in tooth segmentations with a FROC score of 0.988 and a mAP of 0.848. High accuracy was also achieved in the diagnostic classification of impacted teeth (F1 = 0.901, AUC = 0.996), whereas moderate accuracy was achieved in the diagnostic classification of deep caries (F1 = 0.683, AUC = 0.960), early caries (F1 = 0.662, AUC = 0.881), and periapical lesions (F1 = 0.603, AUC = 0.974). The model's performance correlated positively with the quality of annotations in the used public datasets. Selected samples from the DENTEX dataset revealed cases of missing (false-negative) and incorrect (false-positive) diagnoses, which negatively influenced the performance of the AI model. CONCLUSIONS: The use and pooling of public datasets in dental AI research can significantly accelerate the development of new AI models and enable fast exploration of novel tasks. However, standardized quality assurance is essential before using the datasets to ensure reliable outcomes and limit potential biases.

5.5-year-survival of CAD/CAM resin-based composite restorations in severe tooth wear patients.

OBJECTIVES: Aim of this prospective study was to assess full mouth rehabilitation of severe tooth wear patients using minimally invasive CAD/CAM resin-based composite (RBC) restorations and direct veneers by evaluating restoration survival up to 5.5-years. METHODS: Twenty-two patients with generalized severe tooth wear with functional and/or esthetic problems were included. Following minimally invasive preparation, CAD/CAM RBC restorations (LAVA Ultimate,3M) were adhesively luted, direct RBC veneers (Filtek Supreme XTE, 3M) were applied in the aesthetic region. Patients were recalled after 1m,1y,3y,5y and seen in between recalls by their general dentists or at the clinical study center if complaints occurred. Failures were categorized as F1 (severe deficiencies requiring replacement/extraction), F2 (localized deficiencies requiring re-cementation/repair) and F3 (small chippings requiring refurbishment/monitoring). Survival of indirect restorations was evaluated using lifetables and Kaplan-Meier-graphs, distinguishing between failure categories and tooth type (front teeth=FT, premolars=PM, molars=M). F1 + F2 and F1 + F2 + F3 failures were analyzed using Cox regression on the variables tooth type/ location, age, gender and VDO increase (p < 0.05). RESULTS: 568 indirect restorations and 200 direct veneers in 21 patients evaluated for up to 5.5-years. For indirect restorations, 96 failures were recorded (F1:6;F2:41;F3:49) and annual failure rates were 0.29%(FT), 1.56%(PM), 2.93%(M) for F1 +F2 and 0.53%(FT), 2.42%(PM), 6.11%(M) for F1 + F2 + F3. Reasons for failure were chipping fracture (48), adhesive fracture (32), complete debonding (7), caries (4), endodontic treatment (1) and reasons unknown (documentation general dentists, 4). Molar tooth type had a statistically significantly increased probability of failure compared with front teeth and premolars for F1 + F2 + F3 (p < 0.006). Direct veneer restorations showed 18 failures (F1:2;F2:9;F3:7). SIGNIFICANCE: Minimally invasive CAD/CAM RBC restorations combined with direct RBC veneers showed an acceptable clinical mid-term survival for restorative rehabilitation of severely worn dentitions.

Detection of caries around restorations on bitewings using deep learning.

OBJECTIVE: Secondary caries lesions adjacent to restorations, a leading cause of restoration failure, require accurate diagnostic methods to ensure an optimal treatment outcome. Traditional diagnostic strategies rely on visual inspection complemented by radiographs. Recent advancements in artificial intelligence (AI), particularly deep learning, provide potential improvements in caries detection. This study aimed to develop a convolutional neural network (CNN)-based algorithm for detecting primary caries and secondary caries around restorations using bitewings. METHODS: Clinical data from 7 general dental practices in the Netherlands, comprising 425 bitewings of 383 patients, were utilized. The study used the Mask-RCNN architecture, for instance, segmentation, supported by the Swin Transformer backbone. After data augmentation, model training was performed through a ten-fold cross-validation. The diagnostic accuracy of the algorithm was evaluated by calculating the area under the Free-Response Receiver Operating Characteristics curve, sensitivity, precision, and F1 scores. RESULTS: The model achieved areas under FROC curves of 0.806 and 0.804, and F1-scores of 0.689 and 0.719 for primary and secondary caries detection, respectively. CONCLUSION: An accurate CNN-based automated system was developed to detect primary and secondary caries lesions on bitewings, highlighting a significant advancement in automated caries diagnostics. CLINICAL SIGNIFICANCE: An accurate algorithm that integrates the detection of both primary and secondary caries will permit the development of automated systems to aid clinicians in their daily clinical practice.

Single crown vs. composite for glass fiber post-retained restorations: An 8-year randomized clinical trial.

OBJECTIVES: This study aimed to compare the success and survival rates of metal-ceramic crowns and composite resin restorations applied in root filled teeth that received a glass fiber post. METHODS: A prospective, randomized controlled trial, with equivalent parallel groups was designed. Eighty-two teeth were randomly allocated to the metal-ceramic or composite resin groups. Multivariate Cox regression analysis with shared frailty for patients and Kaplan-Meier curves were performed using success and survival rates (p<0.05). RESULTS: Seventy-five post-retained restorations (34 metal-ceramic crowns and 41 composite restorations) in 62 patients were analyzed. The median follow-up was 8.1 years [IQR 4.0-9.9]. Twenty-seven failures were observed. Twenty-two failures (81.5 %) were observed in the composite resin group, of which six (27.3 %) were not repairable. Five failures (18.5 %) were observed in the metal-ceramic crown group, of which three (66.6 %) were non-repairable. The cumulative success rate at 8 years was 85.0 % for crowns (AFR=1.31 %) and 43.2 % for composite resins (AFR=6.58 %), while the survival rate was 93.8 % for crowns (AFR=0.52 %) and 97.6 % for composite resins (AFR=0.20 %). Considering the success rates, adjusted multivariate Cox regression showed that composite resin had a Hazard Ratio of 5.07 (95 %CI, 1.99-12.89) greater than the metal-ceramic crown. No significant difference in the failure risk was observed when the survival rates were considered (HR=0.38, 95 %CI (0.10 - 1.44), p = 0.156). Co-variables did not affect the success and survival rates (p>0.05). CONCLUSIONS: Metal-ceramic crowns showed a higher success rate than composite restorations. The survival rates were similar, but composite restorations presented a higher need for repairs. CLINICAL SIGNIFICANCE: Post-retained composite restorations may need more reinterventions during the lifecycle, although more preservation of sound tooth structure is expected with a large restoration of resin post-and-core. These aspects have to be discussed with the patient for decision-making planning.

The longevity of tooth-coloUred materials used for restoration of tooth wear: an evidence-based approach.

Patients with tooth wear are commonly encountered in general dental practice. When indicated, restorative rehabilitation is often accompanied by a request from the patient for an aesthetic, tooth-coloured outcome. This article seeks to provide an evidence-based approach, focussing on the longevity of the materials which can be used for the restorative treatment of tooth wear, as well as their modes of failure and observed performance.

Association between salivary characteristics and tooth wear: A systematic review and meta-analysis.

OBJECTIVE: Literature was systematically reviewed to identify salivary characteristics and their association with tooth wear. DATA: A protocol was developed a priori (PROSPERO CRD42022338590). Established systematic review methods were used for screening, data extraction, and synthesis. Risk of bias and the certainty of evidence were assessed using the JBI tools and GRADE, respectively. Direct and indirect association between tooth wear and salivary components and characteristics were assessed. SOURCES: MEDLINE, Embase, SCOPUS, Web of Science, CINAHL, and additional sources were searched. STUDY SELECTION: Studies reporting salivary characteristics in patients with tooth wear or models thereof were included. Animal and in-vitro studies and case reports were excluded. RESULTS: One-hundred eleven studies were included. Qualitative analyses showed a negative association between tooth wear and salivary pH and flow rate in many studies. The higher the study size the higher the chances that an association with pH and flow rate was found. Xerostomia, buffer capacity and salivary consistency/viscosity had also some degree of association with tooth wear in fewer studies. Associations with the 39 salivary components were scarcer. Random effects meta-analyses (7 studies) showed that pH levels in stimulated whole saliva were lower in patient with tooth wear compared to controls (-0.07 [-0.10 to -0.04]). However, there was not enough evidence to establish a quantitative association with flow rate. The general risk of bias was unclear and the certainty of evidence was low or very low. A large diversity of methodologies limited the inclusion of all studies in quantitative synthesis. CONCLUSION: From all potential risk factors, stimulated whole saliva pH showed a negative association, both quantitatively and qualitatively with tooth wear, indicating potential usefulness of pH monitoring in these patients. Moreover, associations between flow rate and tooth wear were observed qualitatively. However, in both cases the risk of bias was mostly unclear, and the certainty of evidence was low. No causal associations could be observed. CLINICAL SIGNIFICANCE: Tooth wear is a prevalent condition that may lead to functional or esthetic impairments and pain. Knowing the potential risk factors like salivary pH or flow rate and their dynamics could be relevant during tooth wear monitoring and to intervene accordingly, especially in conditions like gastroesophageal reflux disease.

Inter- and intra-variability in tooth wear progression at surface-, tooth- and patient-level over a period of three years: A cohort study: Inter- and intra-variation in tooth wear progression.

OBJECTIVE: To explore the variability of tooth wear progression at the surface-, tooth- and patient-level over a period of three years three years using in vivo 3D-measurements of full dentitions amongst patients with moderate to severe tooth wear and without demand for restorative rehabilitation. METHODS: Fifty-five eligible patients with moderate to severe tooth wear had intra-oral scans taken using either the 3 M True Definition Intraoral Scanner or the 3 M Lava Chairside Oral Scanner. The maximum height loss (µm) per cusp/incisal/palatal surface at unrestored surfaces was measured using the 3D Wear Analysis (3DWA)-protocol with Geomagic Qualify, resulting in sixty-four measurements per dentition. Data was visualized using box plots. Correlation was calculated between tooth wear progression rates of different tooth types and surfaces. RESULTS: Thirty patients with scans at intake and after three years were included (38 ± 8 years, 77% M, 23% F). Mean observation time was 3.1 ± 0.2 years. Surface measurements (N = 1,615) showed a high deviation and a high number of outliers at all surfaces, indicating large variability amongst the surfaces, tooth types and patients with tooth wear progression rates. Correlations between regions were very low: anterior-molar region -0.219, anterior-premolar region 0.116 and premolar-molar region 0.113. Correlations between the surfaces of molars were also low (between 0.190 and 0.565). CONCLUSIONS: In a group of patients with moderate to severe tooth wear, large differences in wear progression were found within and amongst patients. Tooth wear progression is therefore highly individualized and can be very localized. CLINICAL SIGNIFICANCE: This study confirms the necessity of individual management of patients with moderate to severe tooth wear. Effective monitoring of tooth wear is important when deciding the timing and need for restorative intervention. CLINICAL TRIAL REGISTRATION NUMBER: NCT04790110.

Fatigue behaviour of a self-healing dental composite.

OBJECTIVE: Novel self-healing resin-based composites containing microcapsules have been developed to improve the mechanical performance of dental restorations. However, the long-term fatigue behaviour of these self-healing composites has still been hardly investigated. Therefore, this manuscript studied the fatigue behaviour of self-healing composites containing microcapsules by subjecting the specimens to traditional staircase tests and ageing in a custom-designed chewing simulator (Rub&Roll) to simulate oral ageing physiologically relevant conditions. METHODS: To prepare self-healing composite, poly(urea-formaldehyde) microcapsules containing acrylic self-healing liquids were synthesized. Subsequently, these microcapsules (10 wt%) and initiator (benzoyl peroxide, BPO, 2 wt%) were incorporated into a commercial flowable resin-based composite. Microcapsule-free resin-based composites with and without BPO were also prepared as control specimens. A three-point flexural test was used to measure the initial flexural strength (Sinitial). Subsequently, half of the specimens were used for fatigue testing using a common staircase approach to measure the fatigue strengths (FS). In addition, the other specimens were aged in the Rub&Roll machine for four weeks where after the final flexural strength (Sfinal) was measured. RESULTS: Compared to Sinitial, FS of all tested specimens significantly decreased as measured through staircase testing. After 4 weeks of ageing in the Rub&Roll machine, Sfinal was significantly reduced compared to Sinitial for microcapsule-free resin-based composites, but not for the self-healing composites (p = 0.3658). However, the self-healing composites are still in the experimental phase characterized by a low mechanical strength, which still impedes further clinical translation. SIGNIFICANCE: Self-healing composites containing microcapsules exhibit improved fatigue resistance compared to microcapsule-free non-self-healing composites.

Long term clinical performance of 'open sandwich' and 'total-etch' Class II composite resin restorations showing proximal deterioration of glass-ionomer cement.

OBJECTIVES: To compare clinical performance of resin composite posterior Class-II restorations placed with etch-and-rinse adhesive or open sandwich technique using glass-ionomer cement. METHODS: Data on Class II restorations placed by one dentist between 1990 and 2016 were collected from patient files, including caries risk, tooth related variables, applied materials and dates of last check-up visit and restoration placement. Open sandwich restorations were placed before 2001, while after 2001, a total-etch technique using etch-and-rinse 3-step adhesive was used when placing a Class II composite restoration. For statistical analysis, Kaplan-Meier statistics and a multilevel Cox-Regression was conducted (p < 0.05). Annual Failures Rates (AFR) were calculated. RESULTS: 675 Class II restorations were placed in 91 patients, 491 total-etch restorations (observation time 2-18 y), and 184 open sandwich restorations (observation time 19-29 y) showing AFRs at 15 years as 2.9 % for total-etch and 9.7 % for open sandwich restorations. Secondary caries as failure was equally distributed among the 2 groups and 27 % of the failures in the open sandwich group were due to proximal deterioration of glass-ionomer cement. The Cox-regression showed a significant higher risk for failure for the open sandwich technique compared to total-etch class-II composite restorations (HR = 2.9; p < 0.001). SIGNIFICANCE: Application of glass-ionomer cement using the open sandwich technique cannot be recommended for class-II restorations as being more complex and showing poorer clinical performance.

Perception of oral health related quality of life and orofacial aesthetics following restorative treatment of tooth wear: A five-year follow-up.

OBJECTIVES: Non-carious tooth wear often has a multifactorial etiology and may lead to functional or aesthetically related problems. The most common complaints associated with tooth wear are dissatisfaction with dental appearance and a negative impact on the experienced Oral Health Related Quality of Life (OHRQoL). The aim of this study was to investigate the change in OHRQoL and the perception of aesthetics, following restorative treatment of moderate to severe tooth wear patients, with a five-year follow-up. METHODS: An explorative study, based on prospective data, was performed. OHRQoL and the perception of aesthetics were measured with the OHIP-NL and OES-NL. These questionnaires were completed before treatment, one month after treatment, and at 1-, 3- and 5-years post-treatment. Treatment involved full mouth reconstruction with composite resin restorations. The data was analysed as repeated measures by using a linear mixed-effects model. RESULTS: One hundred and twenty-three tooth wear patients that received restorative rehabilitation were included (97 males, 26 females, 37.5 ± 8.8 years-old). Data showed a statistically significant increase in both experienced OHRQoL and orofacial appearance after restorative treatment. The OHIP-scores remained stable over time, while the OES-scores slightly decreased during the years after treatment. Regarding the seven domains of the OHIP, the largest difference in OHIP-score was found in the domain of 'Psychological Discomfort'. The mean overall OHIP-score was 1.8 at baseline and 1.3 at the 5-years recall. The mean OES score increased from 41.8 at baseline to 66.1 at the 5-years follow-up. CONCLUSIONS: Tooth wear patients reported significant improvements in their OHRQoL and their perception of orofacial aesthetics after restorative treatment. This increase remained at least five years post-treatment. CLINICAL SIGNIFICANCE: The clinical impact of restorative treatment for tooth wear patients is considerable. This paper emphasizes the need to include a discussion of the patient related outcome measures when planning care.

Developing diagnostic criteria for tooth wear, a preliminary beta version based on expert opinion, and a narrative literature review.

BACKGROUND: Tooth wear is a multifactorial condition, leading to the irreversible loss of dental hard tissues. The availability of an unambiguous, universally applicable assessment protocol remains lacking. OBJECTIVES: The goal of the authors is to develop a set of diagnostic criteria for the assessment of tooth wear (DC-TW). A two-step approach will be used to achieve this objective: (1) to develop a preliminary beta version of the DC-TW, based on the authors' clinical experience and their shared expertise and supported by a narrative review of the existing literature, and (2) to develop the final DC-TW, with input from a larger group of experts using an international Delphi process. This paper relates to the first step. METHODS: The authors outlined the components that should be incorporated into the DC-TW. The literature search was performed to investigate if their concept was in line with the available literature. The search was conducted to identify eligible publications from inception to July 11, 2022. Two authors independently screened all publications, and differences in judgements were resolved through a consensus procedure. RESULTS: The search yielded 5362 publications, resulting in the final inclusion of 383. These publications were divided into four main topics: (1) nomenclature/taxonomies; (2) self-report tools; (3) clinical assessment tools; and (4) clinical decision-making. CONCLUSIONS: The information from the publications was used and fused with the clinical experience and shared expertise of the authors to contribute to the development of a preliminary beta version of the DC-TW.

Managing tooth wear with respect to quality of life: an evidence-based decision on when to intervene.

Patients with more severe forms of tooth wear may require restorative rehabilitation. The decision to commence treatment must be taken carefully and there are a multitude of factors to consider. Alongside the clinical signs and symptoms typically associated with tooth wear, there is also the need to assess the impact of the condition on the patient's oral health-related quality of life. As part of the discussions relating to the attainment of informed consent for the restoration of the worn dentition, not only is it relevant to appropriately appraise the risks, benefits, costs, reasonable alternatives and likely prognosis of the proposed treatments, but to also elaborate on the expected impact of the intervention on the patient's oral health-related quality of life. The aim of this article is to review the evidence relating to the impact of the quality of life with the management of tooth wear, with the introduction of the concept of an evidence-based approach to decision-making when planning care.

Monitoring of erosive tooth wear: what to use and when to use it.

Although we are increasingly recognising the need to assess patients for accelerated rates of tooth wear progression, it is often difficult to do so within a feasible diagnostic window. This paper aims to provide evidence-based timelines which a diagnosing clinician can expect to assess tooth wear progression in study models, clinical indices, clinical photographs and visually with intraoral scans. It also discusses new technologies emerging for the quantitative assessment of tooth wear, timelines for diagnosis, and caveats in the 3D scan registration and analysis process.

Posterior Dahl: A Minimally Invasive Method for the Treatment of Localized Posterior Tooth Wear.

PURPOSE: This retrospective case series of 9 patients aimed to describe clinical outcomes and patient satisfaction following the implementation of the posterior Dahl concept to manage localized posterior tooth wear. MATERIALS AND METHODS: Localized occlusal space was created in the posterior dentition. Supra-occluding direct restorations were placed bilaterally for the restoration of molars. Intraoral scans were taken at the pre-treatment stage, immediately post-restoration, and during follow-up appointments. Scans were used to undertake analysis of any occlusal changes and re-establishment of the occlusion. A questionnaire was used to assess patient satisfaction, alleviation of any pre-treatment concerns, and evaluation of post-treatment complaints. RESULTS: Immediately post-treatment, all patients showed an increase in the vertical dimension. Opening of the bite in the untreated areas following restoration of worn posterior molars resulted either in a tendency towards or the actual reestablishment of the occlusion. One patient completely lacked compensatory vertical tooth movement in the untreated areas, culminating in the persistence of a vertical open bite. One restoration displayed cohesive fracture after 4 months. Pre-treatment problems (eg, sensitivity) were fully resolved amongst all patients after 6 months. Post-treatment complaints were minor and demonstrated resolution within a relatively short period of time. Eight patients reported being "very satisfied" with their treatment outcomes. CONCLUSION: Application of the posterior Dahl concept appears to offer a promising, relatively simple, minimally invasive and effective approach for the management of localized posterior tooth wear, which is well accepted by patients.

Revised FDI criteria for evaluating direct and indirect dental restorations-recommendations for its clinical use, interpretation, and reporting.

OBJECTIVES: The FDI criteria for the evaluation of direct and indirect dental restorations were first published in 2007 and updated in 2010. Meanwhile, their scientific use increased steadily, but several questions from users justified some clarification and improvement of the living document. MATERIALS AND METHODS: An expert panel (N = 10) initiated the revision and consensus process that included a kick-off workshop and multiple online meetings by using the Delphi method. During and after each round of discussion, all opinions were collected, and the aggregated summary was presented to the experts aiming to adjust the wording of the criteria as precisely as possible. Finally, the expert panel agreed on the revision. RESULTS: Some categories were redefined, ambiguities were cleared, and the descriptions of all scores were harmonized to cross-link different clinical situations with possible management strategies: reviewing/monitoring (score 1-4), refurbishment/reseal (score 3), repair (score 4), and replacement (score 5). Functional properties (domain F: fracture of material and retention, marginal adaptation, proximal contact, form and contour, occlusion and wear) were now placed at the beginning followed by biological (domain B: caries at restoration margin, hard tissue defects, postoperative hypersensitivity) and aesthetic characteristics (domain A: surface luster and texture, marginal staining, color match). CONCLUSION: The most frequently used eleven categories of the FDI criteria set were revised for better understanding and handling. CLINICAL RELEVANCE: The improved description and structuring of the criteria may help to standardize the evaluation of direct and indirect restorations and may enhance their acceptance by researchers, teachers, and dental practitioners.

Prevalence of tooth wear and associated factors: A birth cohort study.

OBJECTIVES: To investigate the prevalence of tooth wear and associated factors in adults from the 1982 Pelotas Birth Cohort. METHODS: A subsample of the 5,914 individuals from the 1982 Pelotas Birth Cohort was randomly selected to be interviewed and clinically examined at the age of 31. Tooth wear was evaluated using a simplified version of the Tooth Wear Index (TWI), considering the absence or presence of tooth wear in dentin of first molars and anterior teeth (incisors and canines). Independent variables were socioeconomic, demographic, unhealthy behavior, and mental health. Crude and adjusted Poisson regression models were employed. A significant level of P ≤ 0.05 was adopted. RESULTS: A total of 537 individuals were evaluated. A tooth wear prevalence of 61.6% was observed. Females presented a statistically significant lower tooth wear in dentin prevalence ratio (PR) compared to males in the adjusted analysis (PR 0.76; 95% CI: 0.67-0.86). Acid beverage consumption (PR 1.22; 95% CI: 1.01-1.49) and consumption of alcoholic beverages (PR 1.19; 95% CI: 1.04-1.35) were positively associated with tooth wear. CONCLUSION: Almost 2/3 of the surveyed individuals presented tooth wear in dentin. Being a male, higher consumption of alcohol and acidic beverages were factors associated with tooth wear. CLINICAL SIGNIFICANCE: There was a high prevalence of tooth wear in dentin in the adult population. Data has also shown the etiological complexity of tooth wear, reinforcing the importance of an early diagnosis and the establishment of preventive measures to decrease the potentially hazardous effect of tooth wear over time.

Randomised controlled trial on testing an increased vertical dimension of occlusion prior to restorative treatment of tooth wear.

BACKGROUND: Evaluation of a new vertical dimension of occlusion (VDO) in complex restorative treatments is considered a necessary step prior to placement of restorations. OBJECTIVES: This randomised controlled trial (RCT) aimed to assess the effects of using an evaluation of a VDO increase before restorative treatment in patients with moderate-to-severe tooth wear, on OHRQoL, freeway space (FWS) and interventions to restorations. METHODS: Forty-two patients with tooth wear were included and randomly allocated to either a test phase with a Removable Appliance (RA) or no test phase. Restorative treatment consisted of restoration of all teeth using composite restorations in an increased VDO. OHIP-score, freeway space (FWS) and clinical acceptability of restorations were assessed at baseline and at recall appointments (1 month and 1 year). Intervention to restoration was scored in case of material chipping or when the abutment tooth had increased sensitivity that could be linked to occlusal overloading. ANCOVA analyses, Univariate Cox regression, t-tests and descriptive analyses were performed (p < .05). RESULTS: Clinical follow-up after 1 year was completed for 41 patients. No significant effect of testing the VDO with a RA could be found on the OHIP-score (p = .14). Reduction of FWS in the RA group, compared to the control group, was significantly lower at 1 year (p = .01, 95% CI -1.09 to -0.15). No effect on early interventions to restorations was found (p = .94). CONCLUSION: This RCT showed that a removable appliance is not indicated to functionally test the increased VDO prior to restorative treatment in patients with tooth wear.

Evaluation of direct restorations using the revised FDI criteria: results from a reliability study.

OBJECTIVES: The purpose of this in vitro reliability study was to determine the intra- and inter-examiner agreement of the revised FDI criteria including the categories "fracture of material and retention" (F1) and "caries at restoration margin" (B1). MATERIALS AND METHODS: Forty-nine photographs of direct tooth-coloured posterior (n = 25) and anterior (n = 24) restorations with common deficiencies were included. Ten dental experts repeated the assessment in three blinded rounds. Later, the experts re-evaluated together all photographs and agreed on a reference standard. Statistical analysis included the calculation of Cohen's (Cκ), Fleiss' (Fκ), and weighted Kappa (wκ), the development of a logistic regression with a backward elimination model and Bland/Altman plots. RESULTS: Intra- and inter-examiner reliability exhibited mostly moderate to substantial Cκ, Fκ, and wκ values for posterior restorations (e.g. Intra: F1 Cκ = 0.57, wκ = 0.74; B1 Cκ = 0.57, wκ = 0.73/Inter F1 Fκ = 0.32, wκ = 0.53; B1 Fκ = 0.41, wκ = 0.64) and anterior restorations (e.g. Intra F1 Cκ = 0.63, wκ = 0.76; B1 Cκ = 0.48, wκ = 0.68/Inter F1 Fκ = 0.42, wκ = 0.57; B1 Fκ = 0.40, wκ = 0.51). Logistic regression analyses revealed significant differences between the evaluation rounds, examiners, categories, and tooth type. Both the intra- and inter-examiner reliability increased along with the evaluation rounds. The overall agreement was higher for anterior restorations compared to posterior restorations. CONCLUSIONS: The overall reliability of the revised FDI criteria set was found to be moderate to substantial. CLINICAL RELEVANCE: If properly trained, the revised FDI criteria set are a valid tool to evaluate direct and indirect restorations in a standardized way. However, training and calibration are needed to ensure reliable application.