Wood adhesives prepared from lucerne fiber fermentation residues of Ruminococcus albus and Clostridium thermocellum.

Fermentation residues (consisting of incompletely fermented fiber, adherent bacterial cells, and a glycocalyx material that enhanced bacterial adherence) were obtained by growing the anaerobic cellulolytic bacteria Ruminococcus albus 7 or Clostridium thermocellum ATCC 27405 on a fibrous fraction derived from lucerne (Medicago sativa L.). The dried residue was able to serve as an effective co-adhesive for phenol-formaldehyde (PF) bonding of aspen veneer sheets to one another. Testing of the resulting plywood panels revealed that the adhesive, formulated to contain 30% of its total dry weight as fermentation residue, displayed shear strength and wood failure values under both wet and dry conditions that were comparable with those of industry standards for PF that contained much smaller amounts of fillers or extenders. By contrast, PF adhesives prepared with 30% of dry weight as either unfermented lucerne fiber or conventional fillers or extenders rather than as fermentation residues, displayed poor performance, particularly under wet conditions.

Solid residues from Ruminococcus cellulose fermentations as components of wood adhesive formulations.

Residues from the fermentation of cellulose by the anaerobic bacteria Ruminococcus albus (strain 7) or Ruminococcus flavefaciens (strains FD-1 or B34b) containing residual cellulose, bacterial cells and their associated adhesins, were examined for their ability to serve as components of adhesives for plywood fabrication. The residues contained differing amounts of protein (0.4-4.2% of dry weight), but the ratios of monosaccharides recovered following two-stage treatment of the residue with detergent (pH 7) and TFA were similar for all three strains (0.71 glucose:0.18 xylose:0.08 mannose:0.02 galactose), suggesting similarities in exopolysaccharide composition. Three-ply aspen panels prepared with fermentation residues (FR) displayed better shear strength and wood failure under dry conditions than following a vacuum/pressure/soak/dry treatment, but adhesive properties were inferior to those prepared with conventional phenol-formaldehyde (PF) adhesives. However, panels prepared by incorporating the R. albus 7 FR into PF formulation, at 73% by weight of the total adhesive, exhibited shear strength and wood failure similar to that obtained with PF adhesive alone. Use of residues from fermentations by these bacteria as components of adhesives may add value to biomass fermentations aimed primarily at producing ethanol and other chemical products.

Oxygenation of 4-alkoxyl groups in alkoxybenzoic acids by Polyporus dichrous.

The degradation of several alkyl ethers of vanillic acid, of 3-ethoxy-4-hydroxybenzoic acid, and of syringic acid, by the lignin-decomposing fungus Polyporus dichrous included (i) 4-dealkylation (e.g., 3-ethoxy-4-isopropoxybenzoic acid was in part dealkylated to 3-ethoxy-4-hydroxybenzoic acid), (ii) hydroxylation of the 4-alkoxyl groups (e.g., 3-ethoxy-4-isopropoxybenzoic acid was oxidized in part to 2-[4-carboxy-2-ethoxyphenoxy]-propane-1-ol), and (iii) reduction of carboxyl groups (older cultures) (e.g., 3-ethoxy-4-isopropoxybenzoic acid was reduced to 3-ethoxy-4-isopropoxybenzaldehyde and 3-ethoxy-4-isopropoxybenzyl alcohol). Some ethers (e.g., tri-O-methyl gallic acid and glycerol-beta-[4-carboxy-2-ethoxyphenyl]-ether) were not affected. The dealkylations and hydroxylations indicate that the fungus has a relatively nonspecific mechanism for oxygenating various 4-alkoxyl groups of alkoxybenzoic acids; no evidence for oxygenation of 3-alkoxyl groups was obtained. Hydroxylation products were generally degraded further, probably via dealkylation. The vanillic acid and 3-ethoxy-4-hydroxybenzoic acid formed by dealkylations were readily metabolized. Although the isopropyl ether of syringic acid was hydroxylated to 2-(4-carboxy-2, 6-dimethoxyphenoxy)-propane-1-ol, neither this compound nor the parent isopropyl ether was dealkylated; syringic acid itself was only slowly and incompletely metabolized. The relationship of these results to lignin degradation is discussed.

Methoxyhydroquinone, an intermediate of vanillate catabolism by Polyporus dichrous.

Vanillate was metabolized by Polyporus dichrous in liquid culture via methoxyhydroquinone. Protocatechuate, gentisate, and hydroquinone were not affected by vanillate-metabolizing mycelial pellets that readily degraded methoxyhydroquinone.