A membrane-based ELISA assay and electrochemical immunosensor for microcystin-LR in water samples.

We describe within this paper the development of an affinity sensor for the detection of the cyanobacterial toxin microcystin-LR. The first stage of the work included acquiring and testing of the antibodies to this target. Following the investigation, a heterogeneous direct competitive enzyme-linked immunosorbent assay (ELISA) format for microcystin-LR detection was developed, achieving a detection limit, LLD(80) = 0.022 µg L(-1). The system was then transferred to an affinity membrane sorbent-based ELISA. This was an amenable format for immunoassay incorporation into a disposable amperometric immunosensor device. This membrane-based ELISA achieved a detection limit, LLD(80) = 0.06 µg L(-1). A three-electrode immunosensor system was fabricated using thick-film screen-printing technology. Amperometric horseradish peroxidase transduction of hydrogen peroxide catalysis, at low reducing potentials, versus Ag/AgCl reference and carbon counter electrodes, was facilitated by hydroquinone-mediated electron transfer. A detection limit of 0.5 µg L(-1) for microcystin-LR was achieved. Similar levels of detection could be obtained using direct electrochemical sensing of the dye produced using the membrane-based ELISA. These techniques proved to be simple, cost-effective, and suitable for the detection of microcystin-LR in buffer and spiked tap and river water samples.

Biotin synthase mechanism: an overview.

Biotin synthase, a member of the 'radical SAM' (S-adenosylmethionine) family, converts DTB (dethiobiotin) into biotin. The active form of the Escherichia coli enzyme contains two (Fe-S) centres, a (4Fe-4S) and a (2Fe-2S). The (4Fe-4S)2+/+ mediates the electron transfer required for the reductive cleavage of SAM into methionine and a DOA* (deoxyadenosyl radical). Two DOA*, i.e. two SAM molecules, are consumed to activate the positions 6 and 9 of DTB. A direct transfer of isotope from the labelled substrate into DOAH (deoxyadenosine) has been observed with 2H, although not quantitatively, but not with tritium. The source of the sulphur introduced to form biotin is still under debate. We have shown that the (2Fe-2S)2+ cluster can be reconstituted in the apoenzyme with S2- and Fe2+. When S2- was replaced by [34S2-], [35S2-] or Se2-, biotin containing mostly the sulphur isotopes or selenium was obtained. This leads us to favour the hypothesis that the (2Fe-2S) centre is the sulphur donor, which may explain the absence of turnover of the enzyme. DTBSH (9-mercaptodethiobiotin), which already contains the sulphur atom of biotin, was shown to be an alternative substrate of biotin synthase both in vivo and with a crude extract. When this compound was tested with a well-defined in vitro system, the same turnover of one and similar reaction rates were observed for DTB and DTBSH. We postulate that the same intermediate is formed from both substrates.

Surface plasmon resonance sensor for domoic acid based on grafted imprinted polymer.

A molecularly imprinted polymer (MIP) film for domoic acid (DA) was synthesised by direct photo-grafting onto a gold chip suitable for a surface plasmon resonance (SPR) based bioanalytical instrument system, the BIAcore 3000. The gold surface was first functionalised with a self-assembled monolayer of 2-mercaptoethylamine and subsequent carbodiimide chemistry was performed for covalent attachment of the photoinitiator, 4,4'-azobis(cyanovaleric acid). This ensured that the formation of the MIP thin film, comprising 2-(diethylamino) ethyl methacrylate as functional monomer and ethylene glycol dimethacrylate as cross-linker, occurred only at the surface level. Optimisation and control over the grafting procedure were achieved using contact angle measurements and atomic force microscope (AFM) imaging. The surface grafting resulted in the formation of thin and homogeneous MIP film with thickness of 40 nm. A competitive binding assay was performed with free DA and its conjugate with horseradish peroxidase, which was used as a refractive label. The sensor was evaluated for its sensitivity, cross-reactivity, and robustness by using a BIAcore 3000. Likewise, monoclonal antibodies acting as natural receptors for the toxin were studied with the same BIAcore system. Results of a comparison between the artificial and natural receptors are reported. In contrast to monoclonal antibodies, the regeneration of MIP chip did not affect its recognition properties and continuous measurement was possible over a period of at least 2 months.