Bond-Breaking Efficiency of High-Energy Ions in Ultrathin Polymer Films.

Thin films of poly(methyl methacrylate) and poly(vinyl chloride) of different thickness are used to investigate the effect of spatial confinement on the efficiency of bond breaking induced by 2 MeV H^{+} and 2.1 GeV Bi ions. Effective cross sections for oxygen and chlorine loss are extracted for films down to a thickness of about 5 nm and are compared to theoretical estimations based on radial energy density profiles simulated with geant-dna. The cross sections are to a large extent thickness independent, indicating that bond breaking is dominated by short-range processes. This is in contrast to the strongly reduced efficiencies found recently for cratering induced by high-energy ions in similar ultrathin polymer films [Phys. Rev. Lett. 114, 118302 (2015)PRLTAO0031-900710.1103/PhysRevLett.114.118302].

Synthesis and characterization of MoS2 nanosheets.

Here, we report on the synthesis of MoS2 nanosheets using a simple two-step additive-free growth technique. The as-synthesized nanosheets were characterized to determine their structure and composition, as well as their optical properties. The MoS2 nanosheets were analyzed by scanning electron microscopy, transmission electron microscopy (TEM), including high-resolution scanning TEM imaging and energy-dispersive x-ray spectroscopy, x-ray photoelectron spectroscopy (XPS), Raman spectroscopy and photoluminescence (PL). The as-produced MoS2 nanosheets are vertically aligned with curved edges and are densely populated. The TEM measurements confirmed that the nanosheets have the 2H-MoS2 crystal structure in agreement with the Raman results. The XPS results revealed the presence of high purity MoS2. Moreover, a prominent PL similar to mechanically exfoliated few and mono-layer MoS2 was observed for the as-grown nanosheets. For the thin (≤50 nm) nanosheets, the PL feature was observed at the same energy as that for a direct band-gap monolayer MoS2 (1.83 eV). Thus, the as-produced high-quality, large-area, MoS2 nanosheets could be potentially useful for various optoelectronic and catalysis applications.

Adsorption of peroxidase on titanium surfaces: A pilot study.

The present study demonstrates the in vitro and in vivo adsorption of peroxidase onto titanium surfaces. Titanium foils (mean +/- SEM: 365 +/- 2 mm(2), n = 114) were incubated during 30 min with lactoperoxidase (4 mg in 5 mL 100 mM phosphate buffer pH 7). After 15 washings by H(2)O, titanium foils were incubated with o-phenylenediamine (6 mg/mL) and H(2)O(2) (7 mM) during 30 min. The reaction was then stopped by the addition of HCI 1M and the absorbance of the liquid phase was read on a spectrophotometer at 492 nm. In vitro adsorbed lactoperoxidase onto titanium surfaces was 0.70 +/- 0.05 ng/mm(2) (mean +/- SEM, n = 30). X-ray photoelectron spectroscopy confirmed the incorporation of protein nitrogen onto titanium surfaces: the nitrogen atomic percentage increased from 0.9 +/- 0.3 to 12.7 +/- 0.2% (n = 3) and from 3.7 +/- 0.1 to 14.4 +/- 0. 4% (n = 5) when titanium foils were incubated in the lactoperoxidase solution during 30 min and 24 h respectively. In vivo, oral peroxidases adsorbed on titanium healing abutments from 0.01 to 0.58 ng/mm(2) (n = 19) after 2 weeks in the oral environment.

Comparison between different strategies of covalent attachment of DNA to glass surfaces to build DNA microarrays.

DNA microarray is a powerful tool allowing simultaneous detection of many different target molecules present in a sample. The efficiency of the array depends mainly on the sequence of the capture probes and the way they are attached to the support. The coupling procedure must be quick, covalent, and reproducible in order to be compatible with automatic spotting devices dispensing tiny drops of liquids on the surface. We compared several coupling strategies currently used to covalently graft DNA onto a glass surface. The results indicate that fixation of aminated DNA to an aldehyde-modified surface is a choice method to build DNA microarrays. Both the coupling procedure and the hybridization efficiency have been optimized. The detection limit of human cytomegalovirus target DNA amplicons on such DNA microarrays has been estimated to be 0.01 nM by fluorescent detection.

Re-establishment of the atomic composition and the oxide structure of contaminated titanium surfaces by means of carbon dioxide laser and hydrogen peroxide: an in vitro study.

BACKGROUND: In clinical situations with peri-implant bone resorption, re-integration of the exposed implant surface is sometimes preferable, which requires a clean surface. Previous investigations have shown that cleaning of contaminated titanium surfaces using chemical and abrasive methods is difficult. PURPOSE: The aim of this investigation was to evaluate the efficacy of different combinations of chemical and physical methods (citric acid, hydrogen peroxide, and carbon dioxide [CO2] laser irradiation) for removal of contaminants and subsequent reconstruction of the surface oxide of intraorally contaminated titanium foils. MATERIALS AND METHODS: Commercially pure titanium foils (99.6%, 5 x 5 mm in size) were contaminated by placement on dentures in volunteering patients, simulating a peri-implantitis situation. The contaminated foils and clean control foils were treated by seven and six combinations of citric acid, hydrogen peroxide, and CO2 laser irradiation, respectively. The effect of the cleaning procedures was evaluated by x-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). RESULTS: The initial elemental composition of the contaminated foils was 70% carbon (C), 20% oxygen (O), 10% nitrogen (N), and only traces of titanium (Ti) (< 1%). One treatment proved to be more effective than the others: irradiations by 5-second cycles of superpulsed CO2 laser at a power of 7 W, 10-millisecond pulse width, and with an 80-Hz frequency on a wet surface, followed by repeated application of supersaturated citric acid for 30 seconds, each time followed by rinsing with ultrapure water until all tissue remnants had been removed. Finally, hydrogen peroxide of 10-mM concentration was added to the implant surface and evaporated by CO2 laser at the same settings. This treatment protocol resulted in 10% Ti, 45% O, 41% C, and 2 to 3% N, a composition comparable to that of unused foils: 9% Ti, 40% O, 48% C, and traces of N and chlorine (CI). X-ray photoelectron spectroscopy profiles showed that the thickness of the surface oxide was restored and even augmented with this protocol for treatment of contaminated titanium. CONCLUSION: A combination of citric acid, hydrogen peroxide, and CO2 laser irradiation seems to be effective for cleaning and reestablishment of the atomic composition and oxide structure of contaminated titanium surfaces.