ABSTRACT
Solvents purification mainly used in pharmaceutical field such as acetone and methyl ethyl ketone (MEK) were performed through hybrid silica membranes and from binary and multi-components mixtures. Two hybrid silica membranes-zirconia doped bis(triethoxysilyl)methane and bis(triethoxysilyl)ethane (BTESE)-were studied. Flux, permeance, and separation factor were evaluated depending on temperature, composition, and number of organic compounds in the feed. Dehydration tests of acetone were operated at 30 and 45 °C following by acetone and MEK purification at 50 °C from multi-components hydro-organic mixtures where hydrophilic compounds (water, methanol) but also hydrophobic (dichloromethane (DCM) and/or toluene) were present. Results showed that the presence of Zr nanoparticles affected flux and improved selectivity in the case of dehydration. Experiments related to acetone and MEK purification, revealed a mass transfer alteration and a decrease of performance, from 99 to 97 wt% and from 98 to 95 wt% respectively, when the number of compounds in the initial feed grown up and more precisely, in the presence of DCM and toluene thus highlighting a possible coupling effect.
ABSTRACT
In the quest of YBa2Cu3O(7-δ) (Y123) bulk superconductors providing strong magnetic fields without failure, it is of paramount importance to achieve high thermal stabilities to safeguard the magnetic energy inside them during the trapping-field process, and sufficient mechanical reliability to withstand the stresses derived from the Lorenz force. Herein, we experimentally demonstrate a temperature rise induced by dissipative flux motion inside an Y123 thin-wall superconductor, and a significant thermal exchange in a composite bulk Y123 cryomagnet realized by embedding this superconductor with high thermal-conductivity metal network. It resulted in stimulating the maximum trapped field Bm, which reached 6.46 T on 15.9 mm-diameter single disk superconductor after magnetization by field cooling to 17 K under 7 T, leading to an improvement of 18% compared to the thin-wall superconductor. The composite cryomagnet particularly revealed the potential to trap stronger fields if larger magnetic activation is available. By virtue of the pore-free and crack-free microstructure of this cryomagnet, its strength σR was estimated to be 363 MPa, the largest one obtained so far for Y123 bulk superconductors, thus suggesting a striking mechanical reliability that seems to be sufficient to sustain stresses derived from trapped fields stronger than any values hitherto reported.
