The Association of Nanostructured Carbonated Hydroxyapatite with Denatured Albumin and Platelet-Rich Fibrin: Impacts on Growth Factors Release and Osteoblast Behavior.

Platelet-rich Fibrin (PRF), a second-generation blood concentrate, offers a versatile structure for bone regeneration due to its composition of fibrin, growth factors, and cytokines, with adaptations like denatured albumin-enriched with liquid PRF (Alb-PRF), showing potential for enhanced stability and growth factor dynamics. Researchers have also explored the combination of PRF with other biomaterials, aiming to create a three-dimensional framework for enhanced cell recruitment, proliferation, and differentiation in bone repair studies. This study aimed to evaluate a combination of Alb-PRF with nanostructured carbonated hydroxyapatite microspheres (Alb-ncHA-PRF), and how this association affects the release capacity of growth factors and immunomodulatory molecules, and its impact on the behavior of MG63 human osteoblast-like cells. Alb-PRF membranes were prepared and associated with nanocarboapatite (ncHA) microspheres during polymerization. MG63 cells were exposed to eluates of both membranes to assess cell viability, proliferation, mineralization, and alkaline phosphatase (ALP) activity. The ultrastructural analysis has shown that the spheres were shattered, and fragments were incorporated into both the fibrin mesh and the albumin gel of Alb-PRF. Alb-ncHA-PRF presented a reduced release of growth factors and cytokines when compared to Alb-PRF (p < 0.05). Alb-ncHA-PRF was able to stimulate osteoblast proliferation and ALP activity at lower levels than those observed by Alb-PRF and was unable to positively affect in vitro mineralization by MG63 cells. These findings indicate that the addition of ncHA spheres reduces the biological activity of Alb-PRF, impairing its initial effects on osteoblast behavior.

The Effects of Platelet-Rich Fibrin in the Behavior of Mineralizing Cells Related to Bone Tissue Regeneration-A Scoping Review of In Vitro Evidence.

Platelet-rich fibrin (PRF) is a second-generation blood concentrate that serves as an autologous approach for both soft and hard tissue regeneration. It provides a scaffold for cell interaction and promotes the local release of growth factors. PRF has been investigated as an alternative to bone tissue therapy, with the potential to expedite wound healing and bone regeneration, though the mechanisms involved are not yet fully understood. This review aims to explore the in vitro evidence of PRF's effects on the behavior of mineralizing cells related to bone tissue regeneration. A systematic electronic search was conducted up to August 2023, utilizing three databases: PubMed, Web of Science, and Scopus. A total of 76 studies were selected, which presented in vitro evidence of PRF's usefulness, either alone or in conjunction with other biomaterials, for bone tissue treatment. PRF membranes' influence on the proliferation, differentiation, and mineralization of bone cells is linked to the constant release of growth factors, resulting in changes in crucial markers of bone cell metabolism and behavior. This further reinforces their therapeutic potential in wound healing and bone regeneration. While there are some notable differences among the studies, the overall results suggest a positive effect of PRF on cell proliferation, differentiation, mineralization, and a reduction in inflammation. This points to its therapeutic potential in the field of regenerative medicine. Collectively, these findings may help enhance our understanding of how PRF impacts basic physiological processes in bone and mineralized tissue.

Clinical and Biochemical Evaluation of the Use of Alb-PRF versus L-PRF in Mandibular Third Molar Extractions: A Split-Mouth Randomized Clinical Trial.

Bone tissue engineering seeks biomaterials that enable cell migration, angiogenesis, matrix deposition, and tissue regeneration. Blood concentrates like platelet-rich fibrin (L-PRF) offer a cost-effective source of cells and growth factors to enhance healing. The present study aimed to evaluate heated serum albumin with liquid PRF (Alb-PRF) and L-PRF clinically and biochemically after placement in dental sockets following mandibular third molar extraction. In a controlled, split-mouth study involving 10 volunteers, 20 extracted molars were treated with either Alb-PRF or L-PRF. Post-extraction, pain, trismus, infection presence, and swelling were measured. The concentrations of different analytes in the surgical sites were also examined. The data were statistically analyzed, with significance defined at p < 0.05 (t-test). No significant difference was noted between the groups for pain and trismus, but Alb-PRF showed a significant reduction in swelling on day seven. The Alb-PRF group showed lower levels of pro-inflammatory cytokines (GM-CSF, IL-1b, IL-6, IFNy, IL-8, IL-15, RANTES, and MIP-1a) after seven days, with only higher expressions of MIP-1b, IL-1b, and MCP-1 found in the L-PRF group. Differences were observed in the release of analytes between L-PRF and Alb-PRF, with Alb-PRF significantly reducing edema after seven days. Alb-PRF reduced edema, while L-PRF increased inflammatory cytokines. When compared to L-PRF, Alb-PRF reduced edema and the release of inflammatory cytokines, suggesting promising effects in socket healing while underscoring the role of growth factors and cytokines in potential applications of blood concentrates.

The influence of methodology on the comparison of cytotoxicity of total-etch and self-etch adhesive systems.

OBJECTIVES: The present study aimed to compare the in vitro cytocompatibility of two etch-and-rinse (Adper Scothbond, Optibond) and two self-etch (Clearfill SE Bond and Single Bond Universal) dental adhesives through a dentin-barrier model with human pulp fibroblasts. METHODS: Human fibroblasts were placed on a plastic device containing 500µm human dentin discs treated with each adhesive or without treatment (control). Other groups were directly exposed to media conditioned with adhesive samples according to ISO 10993-5:2009. After 24h exposure, cell viability was assessed by XTT, and released inflammatory mediators were detected with a multiparametric immunoassay. RESULTS: The standardized test without barrier indicated both etch-and-rinse adhesives and self-etch as cytotoxic, promoting viabilities under 70% of the control group (p<0.05). The dentin-barrier model identified increased cell viability for self-etch adhesives, with Clearfill SE Bond identified as non-cytotoxic. The immunoassay evidenced high rates of cytokines by cells exposed to the conditioned media of Adper Scotchbond, Optibond S, and Single Bond Universal. CONCLUSIONS: The use of a dentin-barrier in vitro model detected a better biocompatibility for self-etching adhesives and, in the case of Clearfill SE Bond, with a reversion from cytotoxic to biocompatible when compared to the indirect standardized test. CLINICAL SIGNIFICANCE: The use of a dentin-barrier in vitro model was able to detect a better biocompatibility for self-etching adhesives when compared to the indirect standardized test and presents itself as a predictive in vitro method for assessing the cytotoxicity of dental restorative materials that may simulate the clinical condition more accurately.

"Sticky Bone" Preparation Device: A Pilot Study on the Release of Cytokines and Growth Factors.

Sticky bone, a growth factor-enriched bone graft matrix, is a promising autologous material for bone tissue regeneration. However, its production is strongly dependent on manual handling steps. In this sense, a new device was developed to simplify the confection of the sticky bone, named Sticky Bone Preparation Device (SBPD®). The purpose of this pilot study was to investigate the suitability of the SBPD® to prepare biomaterials for bone regeneration with autologous platelet concentrates. The SBPD® allows the blending of particulate samples from synthetic, xenograft, or autogenous bone with autologous platelet concentrates, making it easy to use and avoiding the need of further manipulations for the combination of the materials. The protocol for the preparation of sticky bone samples using the SBPD® is described, and the resulting product is compared with hand-mixed SB preparations regarding in vitro parameters such as cell content and the ability to release growth factors and cytokines relevant to tissue regeneration. The entrapped cell content was estimated, and the ability to release biological mediators was assessed after 7 days of incubation in culture medium. Both preparations increased the leukocyte and platelet concentrations compared to whole-blood samples (p < 0.05), without significant differences between SB and SBPD®. SBPD® samples released several growth factors, including VEGF, FGFb, and PDGF, at concentrations physiologically equivalent to those released by SB preparations. Therefore, the use of SBPD® results in a similar product to the standard protocol, but with more straightforward and shorter preparation times and less manipulation. These preliminary results suggest this device as a suitable alternative for combining bone substitute materials with platelet concentrates for bone tissue regeneration.

Prognosis of Regenerative Endodontic Procedures in Mature Teeth: A Systematic Review and Meta-Analysis of Clinical and Radiographic Parameters.

This work aimed to investigate the use of Regenerative Endodontic Procedures (REP) on the treatment of pulp necrosis in mature teeth through systematic review and meta-analysis of evidence on clinical and radiographic parameters before and after REP. A search was performed in different databases on 9 September 2020, including seven clinical studies and randomized controlled trials (RCT). The methodological quality was assessed using Revised Cochrane risk-of-bias (RoB 2) and Before-and-After tools. Meta-analyses were performed to evaluate the success incidences regarding the reduction of periapical lesion and recovery of sensitivity. The certainty of the evidence was assessed using GRADE. Meta-analysis showed a high overall success of 0.95 (0.92, 0.98) I2 = 6%, with high periapical lesion reduction at 12 months (0.93 (0.86, 0.96) I2 = 37%) and by the end of follow-up (0.91 (0.83, 0.96) I2 = 13%). Lower incidences of positive sensitivity response were identified for the electrical (0.58 (0.46, 0.70) I2 = 51%) and cold tests (0.70 (0.54, 0.84) I2 = 68%). The calculated levels of REP success were similar to those reported for immature teeth. With a very low certainty of evidence, the meta-analysis showed a high incidence of REP's success for mature teeth with necrotic pulp evidenced by periapical lesion reduction and moderate positive responses to sensitivity tests.

Digital Management Systems in Academic Health Sciences Laboratories: A Scoping Review.

Good laboratory practices (GLP) increase the quality and traceability of results in health sciences research. However, factors such as high staff turnover, insufficient resources, and a lack of training for managers may limit their implementation in research and academic laboratories. This Scoping Review aimed to identify digital tools for managing academic health sciences and experimental medicine laboratories and their relationship with good practices. Following the PRISMA-ScR 2018 criteria, a search strategy was conducted until April 2021 in the databases PUBMED, Web of Sciences, and Health Virtual Library. A critical appraisal of the selected references was conducted, followed by data charting. The search identified twenty-one eligible articles, mainly originated from high-income countries, describing the development and/or implementation of thirty-two electronic management systems. Most studies described software functionalities, while nine evaluated and discussed impacts on management, reporting both improvements in the workflow and system limitations during implementation. In general, the studies point to a contribution to different management issues related to GLP principles. In conclusion, this review identified evolving evidence that digital laboratory management systems may represent important tools in compliance with the principles of good practices in experimental medicine and health sciences research.

Effects of rotor angle and time after centrifugation on the biological in vitro properties of platelet rich fibrin membranes.

This study evaluated the impact of rotor angle and time of storage after centrifugation on the in vitro biological properties of platelet-rich fibrin (PRF) membranes. Blood samples (n = 9) were processed with a vertical fixed-angle (V) or a swing-out horizontal (H) centrifuge, with 20-60 min of sample storage after centrifugation. Leukocytes, platelets, and red blood cells were counted, and fibrin architecture was observed by scanning electron microscopy (SEM). The release of FGF2, PDGFbb, VEGF, IL-6, and IL-1ß was measured after incubation on culture media for 7-21 days. Cell content was equivalent in all experimental groups (p > .05). The fibrin matrix was similar for fixed-angle and horizontal centrifugation. Horizontal centrifugation induced a twofold increase in PDGF and 1.7× increase on FGF release as compared to V samples, while IL-1ß was significantly reduced (p < .05). No significant difference was observed on the release of growth factors and cytokines at different times after centrifugation (p < .05). These data suggest that both angles of centrifugation produce PRF membranes with similar structure and cellularity, but horizontal centrifugation induces a higher release of growth factors. Higher times of storage after centrifugation did not impact on cell content and the release of growth factors.

Does the association of blood-derived growth factors to nanostructured carbonated hydroxyapatite contributes to the maxillary sinus floor elevation? A randomized clinical trial.

OBJECTIVE: The combination of calcium phosphate with blood-derived growth factors (BDGF) has been widely used in bone regeneration procedures although its benefits are still unclear. The purpose of this study was to evaluate whether or not BDGF improves the efficacy of a modified carbonated calcium phosphate biomaterial in sinus floor augmentation. MATERIAL AND METHODS: Ten patients underwent 20 sinus floor augmentation procedures using nanostructured carbonated hydroxyapatite (cHA) microspheres alone or associated with BDGF in a randomized controlled clinical trial. The in vitro release of growth factors was assessed by an elution assay. Bone grafts were randomly implanted in the right and left maxillary sinuses of each participant, associated either with a 0.9% saline solution or BDGF. Bone gain was evaluated through cone beam tomography after 180 days. RESULTS: Nine women and one man composed the sample. The blood-derived concentrates were able to release high levels of growth factors and cytokines. A significant clinical advantage was observed in the use of the BDGF after fibrin polymerization around the biomaterial microspheres, optimizing the surgical procedures, thereby reducing the time and displacement, and improving the adaptation of the biomaterial in the maxillary sinus. No synergistic effect was observed in bone formation when cHA was associated with BDGF (p > 0.05). CONCLUSION: Equivalent new bone formation was observed for cHA in the presence or absence of the BDGF concentrate in bilateral sinus floor elevation after 6 months. Blood-derived growth factors did not improve bone repair when associated with calcium phosphate in sinus lift procedures.

The in vitro release of cytokines and growth factors from fibrin membranes produced through horizontal centrifugation.

Platelet-rich fibrin membranes are biomaterials widely used for therapeutic purposes, and canonically produced through the processing of peripheral blood with fixed-angle rotor centrifuges. In this work, we evaluate the in vitro stability and release of cytokines and growth factors when these biomaterials are produced with a horizontal swing-out clinical centrifuge. Membranes produced from the blood of 14 donors were morphologically evaluated by scanning electron microscopy and fluorescence microscopy, and their stability was assessed by photographic recording after incubation in culture medium for up to 28 days. The release of 27 cytokines and growth factors was monitored for three weeks through a multiparametric immunoassay. The fibrin membranes presented complex three-dimensional structure with a high density of nucleated cells. A large release of growth factors [platelet derived growth factor, fibroblastic growth factor (bFGF), and vascular endothelial growth factor] was detected in the first 24 h, followed by time-dependent decay, maintaining significant concentrations after three weeks. Both anti-inflammatory and pro-inflammatory cytokines presented different release peaks, maintaining high rates of elution for up to 21 days. Chemokines of relevance in tissue repair [RANTES, granulocyte colony-stimulating factor (G-CSF)] were also produced in large quantities throughout the experimental period. The present results demonstrate that blood-derived fibrin membranes with high structural stability and cell content can be generated by horizontal centrifugation, being able of a prolonged production/release of growth factors and pro- and anti-inflammatory cytokines. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 1373-1380, 2018.