Crystal Violet-Impregnated Slippery Surface to Prevent Bacterial Contamination of Surfaces.

Biofilms which are self-organized communities can contaminate various infrastructural systems. Preventing bacterial adhesion on surfaces is more desirable than cleaning or disinfection of bacteria-contaminated surfaces. In this study, a 24 h bacterial adhesion test showed that "slippery surfaces" had increased resistance to bacterial contamination compared to polydimethylsiloxane and superhydrophobic surfaces. However, it did not completely inhibit bacterial attachment, indicating that it only retards surface contamination by bacteria. Hence, a strategy of killing bacteria with minimal bacterial adhesion was developed. A crystal violet-impregnated slippery (CVIS) surface with bactericidal and slippery features was produced through a simple dipping process. The CVIS surface had a very smooth and lubricated surface that was highly repellent to water and blood contamination. Bactericidal tests against Escherichia coli and Staphylococcus aureus showed that the CVIS surface exhibited bactericidal activity in dark and also showed significantly enhanced bactericidal activity (>3 log reduction in bacteria number) in white light.

Antibacterial Surfaces with Activity against Antimicrobial Resistant Bacterial Pathogens and Endospores.

Hospital-acquired bacterial infections are a significant burden on healthcare systems worldwide causing an increased duration of hospital stays and prolonged patient suffering. We show that polyurethane containing crystal violet (CV) and 3-4 nm zinc oxide nanoparticles (ZnO NPs) possesses excellent bactericidal activity against hospital-acquired pathogens including multidrug resistant Escherichia coli (E. coli), Pseudomonas aeruginosa, methicillin-resistant Staphylococcus aureus (MRSA), and even highly resistant endospores of Clostridioides (Clostridium) difficile. Importantly, we used clinical isolates of bacterial strains, a protocol to mimic the environmental conditions of a real exposure in the healthcare setting, and low light intensity equivalent to that encountered in UK hospitals (∼500 lux). Our data shows that ZnO NPs enhance the photobactericidal activity of CV under low intensity light even with short exposure times, and we show that this involves both Type I and Type II photochemical pathways. Interestingly, polyurethane containing ZnO NPs alone showed significant bactericidal activity in the dark against one strain of E. coli, indicating that the NPs possess both light-activated synergistic activity with CV and inherent bactericidal activity that is independent of light. These new antibacterial polymers are potentially useful in healthcare facilties to reduce the transmission of pathogens between people and the environment.

Microstructure and antibacterial efficacy of graphene oxide nanocomposite fibres.

Antibacterial polymer nanocomposite fibre meshes containing graphene oxide (GO) nanosheets were successfully prepared by pressurised gyration. The morphological and chemical composition of the resulting fibre meshes were determined using Scanning Electron Microscopy (SEM), Raman spectroscopy, Raman mapping and Fourier-Transform Infrared Spectroscopy (FT-IR). SEM showed the fibres to have an average diameter increasing from ~1-4 µm as the GO loading increased. FT-IR and Raman spectroscopy confirmed the inclusion of GO nanosheets on the fibre surface. The antibacterial potential of GO nanocomposite fibres were investigated using Escherichia coli K12. Average bacterial reduction ranged from 46 to 85 % with results favouring the strongest bioactivities of the nanocomposite containing 8 wt% of GO. Finally, bacterial toxicity of the nanocomposites was evaluated by reactive oxygen species (ROS) formation. A mechanism for the antibacterial behaviour of the nanocomposite fibres is presented. Stimulated Raman scattering imaging and spectra of the fibres post antibacterial studies showed flakes of GO distributed across the surface of the poly(methyl 2-methylpropenoate) (PMMA) fibres, which contribute to the high killing efficacy of the composites towards E. coli. GO nanosheets embedded in a polymer matrix have demonstrated the ability to retain their antibacterial properties, thus offering themselves as a promising antibacterial agent.

Effects of bovine serum albumin on light activated antimicrobial surfaces.

Bovine serum albumin (BSA) is currently recommended as an interfering substance to emulate organic soiling, in evaluating the efficacy of disinfectants. The European Standard recommends 0.03% BSA to test clean conditions and 0.3% for dirty conditions. Reactive oxygen species are known to exert excellent antimicrobial activity with low specificity against a broad range of pathogens. Herein, we present our data from the first study of the effects of the addition of BSA on the antibacterial activity of light activated antimicrobial surfaces. Light activated antimicrobial surfaces were made from polyurethane swell-encapsulated with gold nanoparticles (AuNPs) coated with the light active triarylmethane dye, crystal violet (PU-AuNP-CV). The antibacterial efficacy of the antimicrobial substrates was tested against two strains of Staphylococcus aureus 8325-4, a well-characterised laboratory strain and MRSA 4742, a recent clinical isolate, in the presence of 0.1% to 1% BSA by irradiating the substrates with a fluorescent lamp (300 lux). After 6 hours of irradiation, the number of surviving bacteria was determined. The results showed that BSA reduced the antibacterial efficacy of all the PU-AuNP-CV surfaces with increasing BSA concentrations resulting in a progressive reduction in antibacterial activity towards the bacteria tested. However, the light activated surfaces did perform well at 0.1 and 0.25% BSA levels, showing they may have potential for real world environments with low levels of organic soiling.