Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 16 de 16
Filter
Add more filters










Publication year range
1.
J Phys Chem Lett ; 10(6): 1374-1381, 2019 Mar 21.
Article in English | MEDLINE | ID: mdl-30829040

ABSTRACT

We employed bias-assisted charge extraction techniques to investigate the transient and steady-state recombination of photogenerated charge carriers in complete devices of a disordered polymer-fullerene blend. Charge recombination is shown to be dispersive, with a significant slowdown of the recombination rate over time, consistent with the results from kinetic Monte Carlo simulations. Surprisingly, our experiments reveal little to no contributions from early time recombination of nonequilibrated charge carriers to the steady-state recombination properties. We conclude that energetic relaxation of photogenerated carriers outpaces any significant nongeminate recombination under application-relevant illumination conditions. With equilibrated charges dominating the steady-state recombination, quasi-equilibrium concepts appear suited for describing the open-circuit voltage of organic solar cells despite pronounced energetic disorder.

2.
ACS Appl Mater Interfaces ; 9(48): 42011-42019, 2017 Dec 06.
Article in English | MEDLINE | ID: mdl-29083145

ABSTRACT

Hybrid lead halide perovskites are introduced as charge generation layers (CGLs) for the accurate determination of electron mobilities in thin organic semiconductors. Such hybrid perovskites have become a widely studied photovoltaic material in their own right, for their high efficiencies, ease of processing from solution, strong absorption, and efficient photogeneration of charge. Time-of-flight (ToF) measurements on bilayer samples consisting of the perovskite CGL and an organic semiconductor layer of different thickness are shown to be determined by the carrier motion through the organic material, consistent with the much higher charge carrier mobility in the perovskite. Together with the efficient photon-to-electron conversion in the perovskite, this high mobility imbalance enables electron-only mobility measurement on relatively thin application-relevant organic films, which would not be possible with traditional ToF measurements. This architecture enables electron-selective mobility measurements in single components as well as bulk-heterojunction films as demonstrated in the prototypical polymer/fullerene blends. To further demonstrate the potential of this approach, electron mobilities were measured as a function of electric field and temperature in an only 127 nm thick layer of a prototypical electron-transporting perylene diimide-based polymer, and found to be consistent with an exponential trap distribution of ca. 60 meV. Our study furthermore highlights the importance of high mobility charge transporting layers when designing perovskite solar cells.

3.
Nat Commun ; 8(1): 79, 2017 07 19.
Article in English | MEDLINE | ID: mdl-28724989

ABSTRACT

A long standing question in organic electronics concerns the effects of molecular orientation at donor/acceptor heterojunctions. Given a well-controlled donor/acceptor bilayer system, we uncover the genuine effects of molecular orientation on charge generation and recombination. These effects are studied through the point of view of photovoltaics-however, the results have important implications on the operation of all optoelectronic devices with donor/acceptor interfaces, such as light emitting diodes and photodetectors. Our findings can be summarized by two points. First, devices with donor molecules face-on to the acceptor interface have a higher charge transfer state energy and less non-radiative recombination, resulting in larger open-circuit voltages and higher radiative efficiencies. Second, devices with donor molecules edge-on to the acceptor interface are more efficient at charge generation, attributed to smaller electronic coupling between the charge transfer states and the ground state, and lower activation energy for charge generation.Molecular orientation profoundly affects the performance of donor-acceptor heterojunctions, whilst it has remained challenging to investigate the detail. Using a controllable interface, Ran et al. show that the edge-on geometries improve charge generation at the cost of non-radiative recombination loss.

4.
J Chem Phys ; 144(7): 074904, 2016 Feb 21.
Article in English | MEDLINE | ID: mdl-26896999

ABSTRACT

Using optical spectroscopy in solution and thin film, and supported by quantum chemical calculations, we investigated the aggregation process of the donor-acceptor type molecule p-DTS(FBTTH2)2. We demonstrate that cooling a solution induces a disorder-order phase transition that proceeds in three stages analogous to the steps observed in semi-rigid conjugated polymers. By analyzing the spectra, we are able to identify the spectral signature of monomer and aggregate in absorption and emission. From this we find that in films, the fraction of aggregates is near 100% which is in contrast to films made from semi-rigid conjugated polymers.

5.
Beilstein J Org Chem ; 12: 2543-2555, 2016.
Article in English | MEDLINE | ID: mdl-28144323

ABSTRACT

A novel molecular chromophore, p-SIDT(FBTThCA8)2, is introduced as an electron-donor material for bulk heterojunction (BHJ) solar cells with broad absorption and near ideal energy levels for the use in combination with common acceptor materials. It is found that films cast from chlorobenzene yield devices with strongly s-shaped current-voltage curves, drastically limiting performance. We find that addition of the common solvent additive diiodooctane, in addition to facilitating crystallization, leads to improved vertical phase separation. This yields much better performing devices, with improved curve shape, demonstrating the importance of morphology control in BHJ devices and improving the understanding of the role of solvent additives.

6.
Adv Mater ; 28(7): 1482-8, 2016 Feb 17.
Article in English | MEDLINE | ID: mdl-26663421

ABSTRACT

A low-bandgap polymer:fullerene blend that has significantly reduced energetic losses from photon absorption to VOC is described. The charge-transfer state and polymer singlet are of nearly equal energy, yet the short-circuit current still reaches 14 mA cm(-2).

7.
Adv Mater ; 26(43): 7405-12, 2014 Nov 19.
Article in English | MEDLINE | ID: mdl-25212949

ABSTRACT

Electroluminescence (EL) from the charge-transfer state and singlet excitons is observed at low applied voltages from high-performing small-molecule bulk-heterojunction solar cells. Singlet emission from the blends emerges upon altering the processing conditions, such as thermal annealing and processing with a solvent additive, and correlates with improved photovoltaic performance. Low-temperature EL measurements are utilized to access the physics behind the singlet emission.


Subject(s)
Solar Energy , Molecular Structure , Organic Chemicals/chemistry , Photochemical Processes , Pyrazoles/chemistry , Pyrimidines/chemistry , Temperature , Thiadiazoles/chemistry
8.
Adv Mater ; 26(43): 7308-16, 2014 Nov 19.
Article in English | MEDLINE | ID: mdl-25244408

ABSTRACT

A relationship between solvent additive concentration and active layer thickness in small-molecule solar cells is investigated. Specifically, the additive concentration must scale with the amount of semiconductor material and not as absolute concentration in solution. Devices with a wide range of active layers with thickness up to 200 nm can readily achieve efficiencies close to 6% when the right concentration of additive is used.


Subject(s)
Electric Power Supplies , Solar Energy , Solvents/chemistry , Chlorobenzenes/chemistry , Equipment Design , Esters/chemistry , Linear Models , Microscopy, Atomic Force , Molecular Structure , Octanes/chemistry , Photochemical Processes , Semiconductors , Solutions , Thiadiazoles/chemistry
9.
ACS Nano ; 8(8): 8141-51, 2014 Aug 26.
Article in English | MEDLINE | ID: mdl-25080374

ABSTRACT

New methods connecting molecular structure, self-organization, and optoelectronic performance are important for understanding the current generation of organic photovoltaic (OPV) materials. In high power conversion efficiency (PCE) OPVs, light-harvesting small-molecules or polymers are typically blended with fullerene derivatives and deposited in thin films, forming a bulk heterojunction (BHJ), a self-assembled three-dimensional nanostructure of electron donors and acceptors that separates and transports charges. Recent data suggest micrometer-scale orientational order of donor domains exists within this complex nanomorphology, but the link to the optoelectronic properties is yet unexplored. Here we introduce polarization-dependent, photoconductive atomic force microscopy (pd-pcAFM) as a combined probe of orientational order and nanoscale optoelectronic properties (∼20 nm resolution). Using the donor 7,7'-(4,4-bis(2-ethylhexyl)-4H-silolo[3,2-b:4,5-b']dithiophene-2,6-diyl)bis(6-fluoro-4-(5'-hexyl[2,2'-bithiophen]-5-yl)benzo[c][1,2,5]thiadiazole), p-DTS(FBTTh2)2, we show significant spatial dependence of the nanoscale photocurrent with polarized light in both pristine and BHJ blends (up to 7.0% PCE) due to the local alignment of the molecular transition dipoles. By mapping the polarization dependence of the nanoscale photocurrent, we estimate the molecular orientation and orientational order parameter. Liquid crystalline disclinations are observed in all films, in agreement with complementary electron microscopy experiments, and the order parameter exceeds 0.3. The results demonstrate the utility of pd-pcAFM to investigate the optical/structural anisotropy that exists within a well-performing BHJ system and its relationship to optoelectronic properties on both the nanometer and micrometer length scales.

10.
Adv Mater ; 26(34): 5957-61, 2014 Sep 10.
Article in English | MEDLINE | ID: mdl-25047697

ABSTRACT

Analysis of measured charge-carrier mobilities and fill factors in solution-processable small-molecule bulk-heterojunction solar cells reveals that in order to achieve a high FF, the hole and electron mobilities must be >10(-4) cm 2 V(-1) s(-1) . Neat-film mobility measurements are also found to be a useful predictor of the maximum blend film mobility and FF obtained in blend film solar cells.

11.
J Am Chem Soc ; 136(15): 5591-4, 2014 Apr 16.
Article in English | MEDLINE | ID: mdl-24655050

ABSTRACT

The molecule AT1, with two weakly conjugated chromophores, was designed, synthesized, and examined within the context of its film forming tendencies. While the addition of the second chromophore to the central core enables broadening of the absorption spectrum, this change is mostly apparent in films that are grown slowly. Grazing incidence X-ray scattering (GIWAXS) analysis indicates that these spectral characteristics correspond to an increase in solid state ordering. This information, in combination with differential scanning calorimetry, suggests that the overall molecular shape provides a kinetic barrier to crystallization. As a result, one finds the absence of molecular order when AT1 is combined with PC71BM in solution-cast blends. These findings highlight the importance of molecular topology when designing molecular components for solar cell devices.

12.
J Am Chem Soc ; 136(9): 3597-606, 2014 Mar 05.
Article in English | MEDLINE | ID: mdl-24559286

ABSTRACT

A novel solution-processable small molecule, namely, benzo[1,2-b:4,5-b]bis(4,4'-dihexyl-4H-silolo[3,2-b]thiophene-2,2'-diyl)bis(6-fluoro-4-(5'-hexyl-[2,2'-bithiophene]-5-yl)benzo[c][1,2,5]thiadiazole (p-SIDT(FBTTh2)2), was designed and synthesized by utilizing the silaindacenodithiophene (SIDT) framework as the central D(2) donor unit within the D(1)AD(2)AD(1) chromophore configuration. Relative to the widely studied 7,7'-[4,4-bis(2-ethylhexyl)-4H-silolo[3,2-b:4,5-b']dithiophene-2,6-diyl]bis[6-fluoro-4-(5'-hexyl-[2,2'-bithiophene]-5-yl)benzo[c][1,2,5]thiadiazole] (p-DTS(FBTTh2)2), which contains the stronger donor fragment dithienosilole (DTS) as D(2), one finds that p-SIDT(FBTTh2)2 exhibits a wider band gap and can be used to fabricate bulk heterojunction solar cells with higher open circuit voltage (0.91 V). Most remarkably, thin films comprising p-SIDT(FBTTh2)2 can achieve exceptional levels of self-organization directly via solution deposition. For example, high-resolution transmission electron microscopy analysis shows that p-SIDT(FBTTh2)2 spin-cast from chlorobenzene organizes into crystalline domains with lattice planes that extend over length scales on the order of hundreds of nanometers. Such features suggest liquid crystalline properties during the evolution of the film. Moreover, grazing incidence wide-angle X-ray scattering analysis shows a strong tendency for the molecules to exist with a strong "face-on" orientation relative to the substrate plane. Similar structural features, albeit of more restricted dimensions, can be observed within p-SIDT(FBTTh2)2:PC71BM bulk heterojunction thin films when the films are processed with 0.4% diiodooctane (DIO) solvent additive. DIO use also increases the solar cell power conversion efficiencies (PCEs) from 1.7% to 6.4%. Of significance from a practical device fabrication perspective is that, for p-SIDT(FBTTh2)2:PC71BM blends, there is a wide range of compositions (from 20:80 to 70:30 p-SIDT(FBTTh2)2:PC71BM) that provide good photovoltaic response, i.e., PCE = 4-6%, indicating a robust tendency to form the necessary continuous phases for charge carrier collection. Light intensity photocurrent measurements, charge selective diode fabrication, and internal quantum efficiency determinations were carried out to obtain insight into the mechanism of device operation. Inclusion of DIO in the casting solution results in films that exhibit much lower photocurrent dependence on voltage and a concomitant increase in fill factor. At the optimum blend ratio, devices show high charge carrier mobilities, while mismatched hole and electron mobilities in blends with high or low donor content result in reduced fill factors and device performance.

13.
J Phys Chem Lett ; 5(11): 2000-6, 2014 Jun 05.
Article in English | MEDLINE | ID: mdl-26273886

ABSTRACT

The dynamics of charge generation in a high performing molecular photovoltaic system, p-SIDT(FBTTh2)2 (see Figure 1 ) is studied with transient absorption. The optimized bulk heterojunction material shows behavior observed in many other systems; the majority of charges are generated at short time scales (<150 fs), and a slower contribution from incoherently diffusing excitons is observed at low pump fluence. In a separate experiment, the role of bulk heterojunction material morphology on the process of ultrafast charge generation was investigated with bilayers made with solution processed donor molecules on a photopolymerized C60 layer. The majority of carriers are again produced at short time scales, ruling out the idea that subpicosecond charge generation can be understood wholly in terms of localized excitons. We evaluate possible causes of this behavior and propose that the excited state is highly delocalized on short time scales, providing ample probability density at the charge generating interface.

14.
Adv Mater ; 25(44): 6380-4, 2013 Nov 26.
Article in English | MEDLINE | ID: mdl-24002890

ABSTRACT

Solvent additive processing can lead to drastic improvements in the power conversion efficiency (PCE) in solution processable small molecule (SPSM) bulk heterojunction solar cells. In situ grazing incidence wide-angle X-ray scattering is used to investigate the kinetics of crystallite formation during and shortly after spin casting. The additive is shown to have a complex effect on structural evolution invoking polymorphism and enhanced crystalline quality of the donor SPSM.


Subject(s)
Solar Energy , Solvents/chemistry , Crystallization , Glass/chemistry , Polystyrenes/chemistry , Thiophenes/chemistry , Tin Compounds/chemistry
15.
Adv Mater ; 24(27): 3646-9, 2012 Jul 17.
Article in English | MEDLINE | ID: mdl-22674636

ABSTRACT

A new small molecule, p-DTS(FBTTh(2))(2), is designed for incorporation into solution-fabricated high-efficiency organic solar cells. Of primary importance is the incorporation of electron poor heterocycles that are not prone to protonation and thereby enable the incorporation of commonly used interlayers between the organic semiconductor and the charge collecting electrodes. These features have led to the creation of p-DTS(FBTTh(2))(2)/PC(71)BM solar cells with power conversion efficiencies of up to 7%.


Subject(s)
Heterocyclic Compounds/chemistry , Organosilicon Compounds/chemistry , Solar Energy , Thiadiazoles/chemistry , Electrodes , Organosilicon Compounds/chemical synthesis , Polystyrenes/chemistry , Protons , Semiconductors , Solutions/chemistry , Thiadiazoles/chemical synthesis , Thiophenes/chemistry
16.
Physiother Theory Pract ; 22(4): 207-18, 2006 Sep.
Article in English | MEDLINE | ID: mdl-16920679

ABSTRACT

The purpose of this case study was to report data from a clinical evaluation of an individual with fascioscapulohumeral muscular dystrophy (FSHMD) while using a manual wheelchair versus the same wheelchair fitted with pushrim activated power-assisted wheelchair hubs (PAPAW). An individual with FSHMD was tested for change in heart rate (HR), rate of perceived exertion (RPE), propulsion speed (PS), time to completion (TC), and qualitative observation in a community-based environment. A modified Physiological Cost Index (mPCI) was calculated post hoc. Results indicate HR and mPCI for the PAPAW trials were lower; RPE was "Hard" for manual wheelchair propulsion and "Fairly or Very Light" for the PAPAW trials; PS was twice as fast in both conditions using the PAPAW; and TC was 53% faster with PAPAW than in the manual wheelchair. Qualitatively, the manual propulsion conditions had exaggerated trunk and hip flexion with simultaneous scapula elevation and upward rotation to initiate downward force on the hand rim more so than the PAPAW conditions. The data suggest that propulsion of a wheelchair enhanced by PAPAW is more energy efficient, biomechanically advantageous, and more timesaving than a manual wheelchair for the tested individual with FSHMD in his environment.


Subject(s)
Ergonomics , Muscular Dystrophy, Facioscapulohumeral/rehabilitation , Wheelchairs , Adult , Biomechanical Phenomena , Cost-Benefit Analysis , Energy Metabolism , Equipment Design , Humans , Male , Physical Exertion , United States , Wheelchairs/economics
SELECTION OF CITATIONS
SEARCH DETAIL
...