Toposelective vapor deposition of hybrid and inorganic materials inside nanocavities by polymeric templating and vapor phase infiltration.

Selective deposition of hybrid and inorganic materials inside nanostructures could enable major nanotechnological advances. However, inserting ready-made composites inside nanocavities may be difficult, and therefore, stepwise approaches are needed. In this paper, a poly(ethyl acrylate) template is grown selectively inside cavities via condensation-controlled toposelective vapor deposition, and the polymer is then hybridized by alumina, titania, or zinc oxide. The hybridization is carried out by infiltrating the polymer with a vapor-phase metalorganic precursor and water vapor either via a short-pulse (atomic layer deposition, ALD) or a long-pulse (vapor phase infiltration, VPI) sequence. When the polymer-MO x hybrid material is calcined at 450 °C in air, an inorganic phase is left as the residue. Various suspected confinement effects are discussed. The infiltration of inorganic materials is reduced in deeper layers of the cavity-grown polymer and is dependent on the cavity geometry. The structure of the inorganic deposition after calcination varies from scattered particles and their aggregates to cavity-capping films or cavity-filling low-density porous deposition, and the inorganic deposition is often anisotropically cracked. A large part of the infiltration is achieved already during the short-pulse experiments with a commercial ALD reactor. Furthermore, the infiltrated polymer is more resistant to dissolution in acetone whereas the inorganic component can still be heavily affected by phosphoric acid.

Anomalous-Diffusion-Assisted Brightness in White Cellulose Nanofibril Membranes.

The understanding of the interaction between light and complex, random structures is the key for designing and tailoring the optical appearance and performance of many materials that surround us, ranging from everyday consumer products, such as those for personal care, paints, and paper, to light diffusers used in the LED-lamps and solar cells. Here, it is demonstrated that the light transport in membranes of pure cellulose nanofibrils (CNFs) can be controlled to achieve bright whiteness in structures only a few micrometers thick. This is in contrast to other materials, such as paper, which require hundreds of micrometers to achieve a comparable appearance. The diffusion of light in the CNF membranes is shown to become anomalous by tuning the porosity and morphological features. Considering also their strong mechanical properties and biocompatibility, such white coatings are proposed as a new application for cellulose nanofibrils.

Assessing the reactivity of cellulose by oxidation with 4-acetamido-2,2,6,6-tetramethylpiperidine-1-oxo-piperidinium cation under mild conditions.

The accessibility and reactivity of cellulose are key parameters in its conversion into various products. Several indirect measures, such as water retention value (WRV), fiber saturation point (FSP) and specific surface area (SSA), are often used to characterize cellulosic samples for their reactivity. In this paper, we report on using oxidation with 4-acetamido-2,2,6,6-tetramethylpiperidine-1-oxo-piperidinium cation (4-AcNH-TEMPO+) as a probe reaction for the reactivity of cellulose in mild conditions (pH 9, room temperature). 4-AcNH-TEMPO+ is able to selectively convert hydroxymethyl groups into carboxylate groups. The time dependence of the conversion was monitored by iodometric quantification of the residual 4-AcNH-TEMPO+. Soluble substrates, such as 1-propanol and maltose, were quantitatively oxidized in ca. 1min while 3-16% of cellulose was oxidized in ca. 15min depending on its origin. Extrapolation of the slow residual oxidation to zero time allowed quantification of the easily reactive or accessible cellulose. The 4-AcNH-TEMPO+ reactivity was correlated with several pulp characteristics, including WRV, FSP, SSA, chemical composition, crystallinity, the pulping process and the drying history.