Alleviation of silver nanoparticle-induced sexual behavior and testicular parameters dysfunction in male mice by yttrium oxide nanoparticles.

Silver nanoparticles (Ag-NPs) can easily cross through the blood-testis barrier and encourage reproductive dysfunction. This study investigated the protective effects of yttrium oxide nanoparticles (YO-NPs) on sexual behavior and spermatotoxicity induced by Ag-NPs in male mice. Twenty-four male mice were separated into four groups and injected intraperitoneally once a week as the following: group I (Ag-NPs at the dose of 40 mg/kg), group II (YO-NPs at the dose of 40 mg/kg), group III (Ag + YO NPs at the doses of 40 mg/kg, each) and group IV (control; distilled water). After 35 days of the injections, the sexual behavior, oxidative parameters in testis, sperm parameters, serum testosterone, apoptotic germ cells and testicular histology were evaluated. Our findings showed that Ag-NPs decreased the weight of the reproductive organs, sexual behavior, oxidative defense parameters, sperm count and motility of male mice. In addition, the apoptotic cells in testicular cross-sections and TBARS level increased after Ag-NPs exposure when compared to other groups. However, the YO-NPs had protective effects in the studied parameters of testicles and minimized the Ag-NPs toxicity in male mice. In conclusion, the results revealed that the toxicity of Ag-NPS altered testicular functions in male mice that were effectively ameliorated by YO-NPs.

Synthesis of Electrospun TiO2 Nanofibers and Characterization of Their Antibacterial and Antibiofilm Potential against Gram-Positive and Gram-Negative Bacteria.

Recently, titanium dioxide (TiO2) nanomaterials have gained increased attention because of their cost-effective, safe, stable, non-toxic, non-carcinogenic, photocatalytic, bactericidal, biomedical, industrial and waste-water treatment applications. The aim of the present work is the synthesis of electrospun TiO2 nanofibers (NFs) in the presence of different amounts of air-argon mixtures using sol-gel and electrospinning approaches. The physicochemical properties of the synthesized NFs were examined by scanning and transmission electron microscopies (SEM and TEM) coupled with energy-dispersive X-ray spectroscopy (EDX), ultraviolet-visible spectroscopy and thermogravimetric analyzer (TGA). The antibacterial and antibiofilm activity of synthesized NFs against Gram-negative Pseudomonas aeruginosa and Gram-positive methicillin-resistant Staphylococcusaureus (MRSA) was investigated by determining their minimum bacteriostatic and bactericidal values. The topological and morphological alteration caused by TiO2 NFs in bacterial cells was further analyzed by SEM. TiO2 NFs that were calcined in a 25% air-75% argon mixture showed maximum antibacterial and antibiofilm activities. The minimum inhibitory concentration (MIC)/minimum bactericidal concentration (MBC) value of TiO2 NFs against P. aeruginosa was 3 and 6 mg/mL and that for MRSA was 6 and 12 mg/mL, respectively. The MIC/MBC and SEM results show that TiO2 NFs were more active against Gram-negative P. aeruginosa cells than Gram-positive S. aureus. The inhibition of biofilm formation by TiO2 NFs was investigated quantitatively by tissue culture plate method using crystal violet assay and it was found that TiO2 NFs inhibited biofilm formation by MRSA and P. aeruginosa in a dose-dependent manner. TiO2 NFs calcined in a 25% air-75% argon mixture exhibited maximum biofilm formation inhibition of 75.2% for MRSA and 72.3% for P. aeruginosa at 2 mg/mL, respectively. The antibacterial and antibiofilm results suggest that TiO2 NFs can be used to coat various inanimate objects, in food packaging and in waste-water treatment and purification to prevent bacterial growth and biofilm formation.

Effect of Nanosilica on Mechanical Properties and Microstructure of PVA Fiber-Reinforced Geopolymer Composite (PVA-FRGC).

This paper presents the effects of various nanosilica (NS) contents on the mechanical properties of polyvinyl alcohol (PVA) fiber-reinforced geopolymer composites (PVA-FRGC). Microstructure analysis with X-ray diffraction (XRD) and scanning electron microscopy (SEM) was used to characterize the geopolymer composites. The results showed that the mechanical properties in terms of compressive strength, impact strength, and flexural behavior were improved due to the addition of NS to the PVA-FRGC. The optimum NS content was 1.0 to 2.0 wt%, which exhibited highest improvement in the above mechanical properties. Microstructure analysis showed that the addition of NS up to an optimum level densified the microstructure of the matrix as well as the PVA fiber-geopolymer matrix interface.

Influence of Nano Silica Particles on Durability of Flax Fabric Reinforced Geopolymer Composites.

The durability of natural fibres as reinforcement in geopolymer composites continues to be a matter of concern due to the alkalinity of activators of geopolymer matrices. The alkaline environment is the main reason for natural fibres degradation in cementitious matrices. This paper presents the influence of nano silica (NS) on the durability and mechanical performance of geopolymer composites that are reinforced with flax fabric (FF). The durability investigations were conducted after the storage of samples at ambient temperature for 32 weeks. The study revealed that the addition of nano silica has a positive influence on the physical and mechanical properties of these composites. The presence of NS accelerated the geopolymeric reaction and lowered the alkalinity of the system, thus reducing the degradation of flax fibres.

An Overview of Parameters Controlling the Decomposition and Degradation of Ti-Based Mn+1AXn Phases.

A critical overview of the various parameters, such as annealing atmospheres, pore microstructures, and pore sizes, that are critical in controlling the decomposition kinetics of Ti-based MAX phases is given in this paper. Ti-based MAX phases tend to decompose readily above 1400 °C during vacuum annealing to binary carbide (e.g. TiCx) or binary nitride (e.g. TiNx), primarily through the sublimation of A elements such as Al or Si, forming in a porous MXx surface layer. Arrhenius Avrami equations were used to determine the activation energy of phase decomposition and to model the kinetics of isothermal phase decomposition. Ironically, the understanding of phase decomposition via exfoliating or selective de-intercalation by chemical etching formed the catalyst for the sensational discovery of Mxenes in 2011. Other controlling parameters that also promote decomposition or degradation as reported in the literature are also briefly reviewed and these include effects of pressure and ion irradiations.

Dynamic Diffraction Studies on the Crystallization, Phase Transformation, and Activation Energies in Anodized Titania Nanotubes.

The influence of calcination time on the phase transformation and crystallization kinetics of anodized titania nanotube arrays was studied using in-situ isothermal and non-isothermal synchrotron radiation diffraction from room temperature to 900 °C. Anatase first crystallized at 400 °C, while rutile crystallized at 550 °C. Isothermal heating of the anodized titania nanotubes by an increase in the calcination time at 400, 450, 500, 550, 600, and 650 °C resulted in a slight reduction in anatase abundance, but an increase in the abundance of rutile because of an anatase-to-rutile transformation. The Avrami equation was used to model the titania crystallization mechanism and the Arrhenius equation was used to estimate the activation energies of the titania phase transformation. Activation energies of 22 (10) kJ/mol for the titanium-to-anatase transformation, and 207 (17) kJ/mol for the anatase-to-rutile transformation were estimated.