ABSTRACT
A novel magnetic carbon-silicon composite (Fe-HH-CGFS) was prepared from solid waste coal gasification fine slag (CGFS) by a two-step acid leaching and one-step chemical co-precipitation process, which was optimized using a 3-factor, 3-level Box-Behnken design and then analyzed for correlation. Fe-HH-CGFS was characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Brunauer-Emmett-Teller (BET), thermal gravimetric analysis (TGA), and vibrating sample magnetometer (VSM) measurements. The results demonstrated that Fe-HH-CGFS had a reverse spinel structure with an average particle size of 5.14 nm, exhibiting a microporous/mesoporous structure with a specific surface area (SSA) of 196.84 m2 g-1 and pore volume of 0.346 cm3 g-1. Furthermore, Fe-HH-CGFS could achieve 97.59% removal efficiency of rhodamine B (RhB) under the optimal conditions: an initial concentration of RhB of 100 mg L-1, an adsorption time of 60 min, and a dosage of Fe-HH-CGFS of 1.0 g L-1. The pseudo-second-order model and the Langmuir isotherm satisfactorily described the adsorption behavior. The results indicated that the RhB removal process was a single-molecule layer endothermic adsorption, which is dominated by chemical adsorption reactions. This work is expected to provide an alternative route for the high-value utilization of CGFS and offer a valuable insight for the recycling of other solid wastes, aligning with the green development concept of "treating wastes with wastes".
ABSTRACT
Coal gasification crude slag (CGCS) is the side-product of the coal gasification process, and its effective utilization has attracted great attention. A novel flocculant of poly-aluminum-ferric-acetate-chloride (PAFAC) was synthesized based on the recovery of CGCS by a two-step acid leaching process, namely HCl-acid leaching and HAc-acid leaching, which was optimized by an acid leaching liquor volume ratio of HCl to HAc of 3 : 2, polymerization pH of 3.5, and reaction temperature and time of 70 °C and 3.0 h, respectively. The performance of PAFAC was further evaluated by kaolin simulated wastewater, domestic sewage, river water, and aquaculture wastewater. The results revealed that PAFAC was feasible for the removal of turbidity, chemical oxygen demand (COD) and total phosphorus (TP). Moreover, PAFAC was characterized by X-ray Diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), X-ray fluorescence spectrometry (XRF) and scanning electron microscopy (SEM), which proved that PAFAC was a kind of amorphous polyionic composite. Additionally, the acid leaching kinetics and flocculation mechanisms were further investigated. It was found that the acid leaching process was followed by the unreacted shrinkage core model, and the flocculation process was dominated by charge neutralization, adsorption bridging and precipitation net trapping. The work is expected to develop a new method for the safe disposal of CGCS and provide a novel way for the preparation of Fe-Al composite flocculants, especially, offering a potential strategy for the promotion of the additional value of the coal chemical industry.
ABSTRACT
Coal gasification fine slag (FS), a kind of by-product of coal chemical industry, was recovered for the preparation of functional adsorbents by acid leaching process, which was orthogonally optimized by HCl, HNO3, HF, HAc, and H2SO4. Methylene blue (MB) was used to evaluate the performance of functional adsorbents. The results demonstrated that 57.6% of the leaching efficiency (RLE) and 162.94 mg/g of adsorption capacity (CAC) of MB were achieved under the optimal conditions of HNO3 of 2.0 mol/L, acid leaching time of 2.0 h, and acid leaching temperature of 293K. The detections on X-ray Diffraction (XRD), Scanning Electron Microscope (SEM), Fourier Transform Infrared Spectroscopy (FTIR), and BET surface area (SBET) indicated that the synthesized functional adsorbents were characterized by mesoporous materials. The good fitting of adsorption process using pseudo-second-order and Langmuir models demonstrated that the chemisorption contributed to MB removal. The results of thermodynamics further revealed that the adsorption process of MB occurred spontaneously due to the exothermic properties. The work is expected to develop a novel and cost-effective strategy for the safe disposal of FS, and potentially offer an alternative pathway to increase the additional value for the coal chemical industry.
