ABSTRACT
Traditional optical information recognition (OIR), particle capture and manipulation require many optical devices or mechanical moving system components to achieve a specific function, which is difficult to achieve integration. This paper proposes a new method to realize these functions by using multi-focus metalens combining spectrum and polarization selection. The design incorporates three spectral bands, namely 500â nm, 580â nm, and 660â nm, within the visible light range. Additionally, it utilizes either left-handed or right-handed circularly polarized (LCP/RCP) light, resulting in six distinct focus focusing effects on a single focal plane. By analyzing the normalized light intensity (NLI) at the corresponding focus position, the OIR of any wavelength and polarization detection in the design can be realized, and the particle capture at different focusing positions can be realized. Our work can provide a new idea for the high integration of on-chip light recognition and operation and inspire the design of a highly integrated optical system with a smaller size and more substantial function.
ABSTRACT
The remarkable ultrathin ability of metalenses gives them potential as a next-generation imaging candidate. However, the inherent chromatic aberration of metalenses restricts their widespread application. We present an achromatic metalens with optoelectronic computing fusion (OCF) to mitigate the impact of chromatic aberration and simultaneously avoid the significant challenges of nanodesign, nanofabrication, and mass production of metalenses, a method different from previous methods. Leveraging the nonlinear fitting, we demonstrate that OCF can effectively learn the chromatic aberration mapping of metalens and thus restore the chromatic aberration. In terms of the peak signal-to-noise ratio index, there is a maximum improvement of 12 dB, and â¼8 ms is needed to correct the chromatic aberration. Furthermore, the edge extraction of images and super-resolution reconstruction that effectively enhances resolution by a factor of 4 are also demonstrated with OCF. These results offer the possibility of applications of metalenses in mobile cameras, virtual reality, etc.
ABSTRACT
To improve the sensing performance of optical fiber magnetic field sensor based on magneto-refractive effect, a D-shaped photonic crystal fiber-surface plasmon resonance (PCF-SPR) sensor based on magneto-refractive effect is proposed and its magnetic field sensing characteristics are investigated. The designed D-shaped PCF has a core-analyte-gold structure. Within the D-shaped PCF, the side polishing surface is coated with the gold film and the special hole is sandwiched between the core and the gold film. To realize the high magnetic field sensitivity for the fiber SPR magnetic field sensor, the special hole is filled with magnetic fluid (MF). In this paper, we analyze the mode transmission characteristics and magnetic field sensing characteristics of this fiber sensor by finite element method. We also obtain a general rule for the optimization of PCF-SPR sensors by analyzing the dispersion curves, the energy of the surface plasmon polariton mode and the core mode on the sensing performance of the designed fiber sensor. The maximum refractive index sensitivity and magnetic field sensitivity of the optimized fiber are 59714.3 nm/RIU and 21750 pm/mT (50-130 Oe), respectively. Compared with optical fiber magnetic field sensors based on magneto-refractive effect reported previously, the magnetic field sensitivity in this paper is nearly two orders of magnitude higher and it can initially achieve nT magnitude magnetic field resolution and testing capability. The proposed fiber sensor has the advantages of simple structure, easy production, high sensitivity, and strong environmental adaptability. It not only improves the sensing performance of optical fiber magnetic field sensors, but also provides an ideal alternative platform for biosensors like microfluidics because of its high refractive index sensitivity and the special structure.
