Accuracy of 12 Intraocular Lens Power Formulas After Corneal Myopic Refractive Surgery.

PURPOSE: To assess the predictive accuracy of new-generation online intraocular lens (IOL) power formulas in eyes with previous myopic laser refractive surgery (LRS) and to evaluate the influence of corneal asphericity on the predictive accuracy. METHODS: The authors retrospectively evaluated 52 patients (78 eyes) with a history of laser in situ keratomileusis (LASIK) or photorefractive keratectomy (PRK) who subsequently underwent cataract surgery. Refractive prediction errors were calculated for 12 no-history new online formulas: 8 formulas with post-LRS versions (Barrett True-K, EVO 2.0, Hoffer QST, and Pearl DGS) using keratometry and posterior/total keratometry measured by IOLMaster 700 and 4 formulas without post-LRS versions (Cooke K6 and Kane) using keratometry and total keratometry. The refractive prediction error, mean absolute error (MAE), and percentages of eyes with prediction errors of ±0.25, ±0.50, ±0.75, ±1.00, and ±1.50 diopters (D) were compared. RESULTS: The MAEs of the 12 formulas were significantly different (F = 83.66, P < .001). The MAEs ranged from 0.62 to 0.94 D and from 1.07 to 1.84 D in the formulas with and without post-LRS versions, respectively. The EVO formula produced the lowest MAE (0.60) and MedAE (0.47), followed by the Barrett True-K (0.69 and 0.50, respectively). Each percentage of eyes with refractive prediction error was also significantly different among the 12 formulas (P < .001). CONCLUSIONS: The EVO and Barrett True-K formulas demonstrate comparable performance to the other existing formulas in eyes with a history of myopic LASIK/PRK. Surgeons should use these formulas with post-LRS versions and input keratometric values whenever possible. [J Refract Surg. 2024;40(6):e354-e361.].

Dissipation behavior, residue transfer, and safety evaluation of chlorantraniliprole and indoxacarb during tea growing and brewing by ultrahigh-performance liquid chromatography-tandem mass spectrometry.

A reliable and simple analytical method was developed and validated to simultaneously determine chlorantraniliprole and indoxacarb in tea using ultrahigh-performance liquid chromatography-tandem mass spectrometry. The average recoveries of chlorantraniliprole were in the range of 86-110%, with the precision of intraday (n = 5) and interday (n = 15) ranging from 1.9 to 8.4% and from 2.4 to 8.8%, respectively. The average recoveries of indoxacarb were in the range 81-105%, with the precision of intraday (n = 5) and interday (n = 15) ranging from 2.0 to 9.8% and from 2.7 to 9.1%, respectively. The limits of quantification (LOQs) were all 0.01 mg/kg. The results based on the supervised field trials showed that chlorantraniliprole and indoxacarb in two tea samples followed first-order kinetics models with half-lives of 2.2-4.7 days and 2.5-3.5 days, which could be regarded as a moderately degrading pesticide. The terminal residues of chlorantraniliprole and indoxacarb in made tea were below 6.7 and 4.5 mg/kg, respectively, lower than their corresponding maximum residue limits (MRLs) established by several major countries and organizations (50 and 5 mg/kg). The leaching rates of chlorantraniliprole and indoxacarb during the tea brewing ranged from 4.78 to 12.62% and 4.13 to 10.67%, respectively. The chronic intake risk quotient (RQc) values for chlorantraniliprole and indoxacarb were 0.24% and 35.10%, while the acute dietary risk assessment (RQa) value of indoxacarb was 5.8%, which were all much lower than 100%. The results in the present study indicated that the health risk posed by the chlorantraniliprole and indoxacarb mixture pesticides was negligible in tea for consumers at the recommended dosages.

A Primary Study of Variable Polarity Plasma Arc Welding Using a Pulsed Plasma Gas.

A process variant of variable polarity plasma arc welding (VPPAW), that is, the pulsed plasma gas VPPAW process, was developed. The pulsed plasma gas was transmitted into the variable polarity plasma arc through a high-frequency solenoid valve to modify the output of the plasma arc. The collection of arc electrical characteristics, arc shapes, and weld formation from VPPAW, double-pulsed VPPAW (DP-VPPAW), and pulsed plasma gas VPPAW (PPG-VPPAW) was carried out to examine if the pulsed plasma gas was able to play a positive role in improving the stability and quality of the VPPAW process. The arc voltage shows that the pulsed plasma gas had a greater influence on the electrode positive polarity voltage. The lower the plasma gas frequency was, the lower the arc voltage fluctuation frequency was and the greater the arc voltage fluctuation amplitude was. From the arc image, it could be observed that the arc core length had a short decrease during the general rising trend after plasma gas was turned on. The arc core width only had a slight change due to the restriction of the torch orifice. Compared with pulsed current wave, the pulsed plasma gas could better enhance the fluidity of the molten pool to reduce porosity during aluminum keyhole welding.