Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 5 de 5
Filter
Add more filters










Database
Language
Publication year range
1.
Nanoscale ; 15(42): 17085-17096, 2023 Nov 02.
Article in English | MEDLINE | ID: mdl-37847496

ABSTRACT

Biomedical photothermal therapy with optical nanoparticles is based on the conversion of optical energy into heat through three steps: optical absorption, thermal conversion of the absorbed energy and heat transfer to the surrounding medium. The light-to-heat conversion efficiency (LHCE) has become one of the main metrics to quantitatively characterize the last two steps and evaluate the merit of nanoparticules for photothermal therapy. The estimation of the LHCE is mostly performed by monitoring the temperature evolution of a solution under laser irradiation. However, this estimation strongly depends on the experimental set-up and the heat balance model used. We demonstrate here, theoretically and experimentally, that the LHCE at multiple wavelengths can be efficiently and directly determined, without the use of models, by calibrated photoacoustic spectroscopy. The method was validated using already characterized colloidal suspensions of silver sulfide nanoparticles and maghemite nanoflowers and an uncertainty of 3 to 7% was estimated for the LHCE determination. Photoacoustic spectroscopy provides a new, precise and robust method of analysis of the photothermal capabilities of aqueous solutions of nanoagents.

2.
IEEE Trans Ultrason Ferroelectr Freq Control ; 70(12): 1607-1620, 2023 Dec.
Article in English | MEDLINE | ID: mdl-37079412

ABSTRACT

Volumetric, multimodal imaging with precise spatial and temporal coregistration can provide valuable and complementary information for diagnosis and monitoring. Considerable research has sought to combine 3-D photoacoustic (PA) and ultrasound (US) imaging in clinically translatable configurations; however, technical compromises currently result in poor image quality either for PA or ultrasonic modes. This work aims to provide translatable, high-quality, simultaneously coregistered dual-mode PA/US 3-D tomography. Volumetric imaging based on a synthetic aperture approach was implemented by interlacing PA and US acquisitions during a rotate-translate scan with a 5-MHz linear array (12 angles and 30-mm translation to image a 21-mm diameter, 19 mm long cylindrical volume within 21 s). For coregistration, an original calibration method using a specifically designed thread phantom was developed to estimate six geometrical parameters and one temporal offset through global optimization of the reconstructed sharpness and superposition of calibration phantom structures. Phantom design and cost function metrics were selected based on analysis of a numerical phantom and resulted in a high estimation accuracy for the seven parameters. Experimental estimations validated the calibration repeatability. The estimated parameters were used for the bimodal reconstruction of additional phantoms with either identical or distinct spatial distributions of US and PA contrasts. The superposition distance of the two modes was within < 10% of the acoustic wavelength, and a wavelength-order uniform spatial resolution was obtained. This dual-mode PA/US tomography should contribute to more sensitive and robust detection and follow-up of biological changes or the monitoring of slower-kinetic phenomena in living systems such as the accumulation of nanoagents.

3.
ACS Appl Mater Interfaces ; 14(49): 54439-54457, 2022 Dec 14.
Article in English | MEDLINE | ID: mdl-36468426

ABSTRACT

Smart microgels (µGels) made of polymeric particles doped with inorganic nanoparticles have emerged recently as promising multifunctional materials for nanomedicine applications. However, the synthesis of these hybrid materials is still a challenging task with the necessity to control several features, such as particle sizes and doping levels, in order to tailor their final properties in relation to the targeted application. We report herein an innovative modular strategy to achieve the rational design of well-defined and densely filled hybrid particles. It is based on the assembly of the different building blocks, i.e., µGels, dyes, and small gold nanoparticles (<4 nm), and the tuning of nanoparticle loading within the polymer matrix through successive incubation steps. The characterization of the final hybrid networks using UV-vis absorption, fluorescence, transmission electron microscopy, dynamic light scattering, and small-angle X-ray scattering revealed that they uniquely combine the properties of hydrogel particles, including high loading capacity and stimuli-responsive behavior, the photoluminescent properties of dyes (rhodamine 6G, methylene blue and cyanine 7.5), and the features of gold nanoparticle assembly. Interestingly, in response to pH and temperature stimuli, the smart hybrid µGels can shrink, leading to the aggregation of the gold nanoparticles trapped inside the polymer matrix. This stimuli-responsive behavior results in plasmon band broadening and red shift toward the near-infrared region (NIR), opening promising prospects in biomedical science. Particularly, the potential of these smart hybrid nanoplatforms for photoactivated hyperthermia, photoacoustic imaging, cellular internalization, intracellular imaging, and photothermal therapy was assessed, demonstrating well controlled multimodal opportunities for theranostics.


Subject(s)
Hyperthermia, Induced , Metal Nanoparticles , Microgels , Nanoparticles , Photoacoustic Techniques , Gold/chemistry , Fluorescent Dyes/chemistry , Photothermal Therapy , Photoacoustic Techniques/methods , Metal Nanoparticles/chemistry , Hyperthermia, Induced/methods , Nanoparticles/chemistry , Polymers/chemistry , Microscopy, Electron, Transmission , Hydrogen-Ion Concentration , Phototherapy , Cell Line, Tumor
4.
Sensors (Basel) ; 22(17)2022 Aug 30.
Article in English | MEDLINE | ID: mdl-36081006

ABSTRACT

Photoacoustic (PA) imaging systems are spreading in the biomedical community, and the development of new PA contrast agents is an active area of research. However, PA contrast agents are usually characterized with spectrophotometry or uncalibrated PA imaging systems, leading to partial assessment of their PA efficiency. To enable quantitative PA spectroscopy of contrast agents in vitro with conventional PA imaging systems, we have developed an adapted calibration method. Contrast agents in solution are injected in a dedicated non-scattering tube phantom imaged at different optical wavelengths. The calibration method uses a reference solution of cupric sulfate to simultaneously correct for the spectral energy distribution of excitation light at the tube location and perform a conversion of the tube amplitude in the image from arbitrary to spectroscopic units. The method does not require any precise alignment and provides quantitative PA spectra, even with non-uniform illumination and ultrasound sensitivity. It was implemented on a conventional imaging setup based on a tunable laser operating between 680 nm and 980 nm and a 5 MHz clinical ultrasound array. We demonstrated robust calibrated PA spectroscopy with sample volumes as low as 15 µL of known chromophores and commonly used contrast agents. The validated method will be an essential and accessible tool for the development of new and efficient PA contrast agents by improving their quantitative characterization.


Subject(s)
Photoacoustic Techniques , Contrast Media/chemistry , Phantoms, Imaging , Photoacoustic Techniques/methods , Spectrum Analysis/methods , Ultrasonography/methods
5.
ACS Appl Mater Interfaces ; 14(36): 40501-40512, 2022 Sep 14.
Article in English | MEDLINE | ID: mdl-36044427

ABSTRACT

We have designed a new Bodipy scaffold for efficient in vivo photoacoustic (PA) imaging of nanoparticles commonly used as drug nanovectors. The new dye has an optimized absorption band in the near-infrared window in biological tissue and a low fluorescence quantum yield that leads to a good photoacoustic generation efficiency. After Bodipy-initiated ring-opening polymerization of lactide, the polylactide-Bodipy was formulated into PEGylated nanoparticles (NPs) by mixing with PLA-PEG at different concentrations. Formulated NPs around 100 nm exhibit excellent PA properties: an absorption band at 760 nm and a molar absorption coefficient in between that of molecular PA absorbers and gold NPs. Highly improved photostability compared to cyanine-labeled PLA NPs as well as innocuity in cultured macrophages were demonstrated. After intravenous injection in healthy animals, NPs were easily detected using a commercial PA imaging system and spectral unmixing, opening the way to their use as theranostic agents.


Subject(s)
Nanoparticles , Photoacoustic Techniques , Animals , Boron Compounds , Contrast Media , Photoacoustic Techniques/methods , Polyesters , Polymers
SELECTION OF CITATIONS
SEARCH DETAIL
...