Ciprofloxacin in Layered Double Hydroxides: Looking for the Best Synthesis Method.

It is important to develop new methods of release to improve pharmacokinetic parameters of drugs, especially antibiotics, whose plasmatic concentration is determinant to ensure an effective treatment. Layered double hydroxides (LDH) are inorganic and biocompatible materials with high drug intercalation capacity and release properties that can be tuned by controlling the pH value. These materials can be an excellent choice to achieve a sustained release and an optimal drug concentration in plasm. In this work, LDH were synthesized with intercalated ciprofloxacin (CIP) by three different methods: coprecipitation, reconstruction and ion exchange. LDH-CIP complexes were characterized by XRD, TG-DSC, TEM, SEM, FTIR, electrophoretic mobilities, and drug release and dissolution kinetics in NaCl solutions and under physiological conditions. The coprecipitation and reconstruction methods lead to the formation of ill-defined products, whereas the ion exchange method rendered the best intercalation results. CIP release was controlled by dissolution at pH<3 and by desorption and ion exchange at intermediate and high pH. In comparison with a commercial formulation, the LDH-CIP complex prepared by ion exchange presented a slower release profile. The fast dissolution at gastric pH raises the need of developing some type of coating for protecting LDH materials.

Synthesis of Layered Double Hydroxides Intercalated With Drugs for Controlled Release: Successful Intercalation of Ibuprofen and Failed Intercalation of Paracetamol.

This work examines the effect of drug structure and ionization degree on the formation and properties of biocompatible layered double hydroxides (LDH) intercalated with ibuprofen and paracetamol. Ibuprofen (pKa = 5.3) is in its anionic form, whereas paracetamol (pKa 9.4) is only partially ionized at the synthesis pH (9.0), and thus intercalation is expected to be different in the two cases. Chemical analyses, X-ray diffraction, electron microscopy, infrared spectroscopy and thermal analyses were applied to characterize the materials. Dissolution kinetics and drug release kinetics were also investigated, in an ample range of pH (3.0-9.0) in NaCl solutions, and in physiological buffers (1.2, 4.5 and 6.8). All characterization techniques showed that an efficient intercalation of ibuprofen took place, resulting in a material with 30% of its weight corresponding to the drug. On the contrary, all techniques revealed a very poor intercalation of paracetamol (1.2%). The dissolution kinetics of LDHs was highly pH-dependent, being higher as pH decreased. The drug release kinetics, conversely, increased as pH increased. In physiological buffers the release rate depended not only on the pH but also on the type of buffer. This last behavior is useful to control the release in different parts of the digestive system.

Quantum chemical study on surface complex structures of phosphate on gibbsite.

Quantum mechanics calculations based on the density functional theory (DFT) were used to identify phosphate surface complexes on gibbsite at low and high pH. The different phosphate species were represented using the Al6(OH)18(H2O)6 cluster model considering four different geometries: monodentate mononuclear (Pmm), monodentate binuclear (Pmb), bidentate mononuclear (Pbm) and bidentate binuclear (Pbb). The corresponding adsorption reactions were modelled via ligand exchange between phosphate species and surface functional groups (hydroxyls and protonated hydroxyls at high and low pH, respectively). The theoretical results indicate that phosphate surface complexes are thermodynamically more favored at acid pH, in agreement with experimental evidences. The first step in these reactions, i.e., the generation of required aluminum vacant sites, was predicted to be particularly favorable when singly coordinated aquo groups are released. Stretching and bending vibrational frequencies associated with the different surface structures were calculated at both pH conditions. The corresponding values at low pH were found to be shifted to higher frequencies with respect to those ones at high pH. ATR-FTIR studies were also carried out. The resulting spectra are dominated by a strong band within the 800-840 cm(-1) interval due to P-OH stretching modes. The corresponding peak appearing around 820 cm(-1) at high pH is shifted to lower frequencies with respect to the position at low pH, a tendency well predicted by DFT calculations.

Arsenate adsorption and desorption kinetics on a Fe(III)-modified montmorillonite.

The adsorption-desorption kinetics of arsenate on a Fe(III)-modified montmorillonite (Fe-M) was studied at different arsenate concentrations, pH and stirring rates. The synthesized solid was a porous sample with Fe(III) present as a mix of monomeric and polymeric Fe(III) species in the interlayer and on the external surface. Adsorption took place in a two-step mechanism, with an initial fast binding of arsenate to Fe(III) species at the external surface (half-lives of 1 min or shorter) followed by a slower binding to less accessible Fe(III) species in pores and the interlayer (half-lives of around 1 h). Desorption kinetics also reflected the presence of externally and internally adsorbed arsenate. At pH 6 the maximum adsorbed arsenate was 52 µmol/g, a value that is low as compared to adsorption on ferrihydrite (700 µmol/g) and goethite (192-220 µmol/g). However, since the Fe(III) content of Fe-M is much lower than that of ferrihydrite and goethite, Fe(III) species in Fe-M are more efficient in binding arsenate than in ferrihydrite or goethite (one As atom is attached every 8.95 iron atoms). This high binding efficiency indicates that Fe(III) species are well spread on montmorillonite, forming small oligomeric species or surface clusters containing just a few iron atoms.

An ATR-FTIR study of different phosphonic acids adsorbed onto boehmite.

An ATR-FTIR study of the vibrational spectra of N,N-bis(2-hydroxyethyl) aminomethylphosphonic acid (BHAMP), 1-hydroxyethane-1,1'-diphosphonic acid (HEDP) and nitrilotris(methylenephosphonic acid) (NTMP) adsorbed onto boehmite is presented. The study was performed in the pH range from 5 to 9, and bands assignments are given in the 1200-900 cm(-1) wavenumber range, where the bands associated with various P-O(H) vibrations can be found. The three phosphonic acids adsorb onto boehmite by forming inner-sphere surface complexes. ATR-FTIR data indicates the presence of both protonated and deprotonated mononuclear surface species. In all cases, the surface-bound ions undergo protonation reactions as pH is decreased. The results are in good agreement with previously proposed surface complexation models.

Reactive dyes remotion by porous TiO2-chitosan materials.

In this work, the aim was to evaluate the remotion (adsorption plus degradation) of two reactive dyes, Methylene Blue (MB) and Benzopurpurin (BP), from aqueous solutions by the utilization of TiO2-chitosan microporous materials. Two different TiO2-chitosan hybrid materials were synthesized: TiO2-Chit A with 280 mg chitosan/gTiO2 and TiO2-Chit B with 46.76 mg chitosan/g TiO2. Adsorption data obtained at different solution temperatures (25, 35, and 45 degrees C) revealed an irreversible adsorption that decrease with the increment of T. Langmuir, Freundlich and Sips isotherm equation were applied to the experimental data. The obtained parameters and correlation coefficient showed that the adsorption of both dyes on TiO2-Chit A at the three work temperatures was best predicted by the Langmuir isotherm, while Sips equation adjusted better to adsorption data on TiO2-Chit B. The adsorption enthalpy was relatively high and varied with T, indicating that interaction between adsorbent and adsorbate molecules was not only physical but chemical. There is a change in the adsorption heat capacity, (Delta(ads)C(p)<0), related with intense hydrophobic interactions. The kinetic adsorption data were processed by the application of Lagergren and Avrami models. It was found that adsorption of both dyes on both adsorbents under the operating conditions was best predicted by Avrami model. The variation of kinetic order, n, and k(av) with T are related to a pore followed by intra particle diffusion control of the adsorption rate. MB photodegradation on both TiO2-chitosan hybrid materials was of 91 (in A) and 41% (in B) and augmented with the chitosan content. For BP can be seen that the process in darkness resulted in a high remotion capacity than in UV light presence.

An ATR-FTIR study of different phosphonic acids in aqueous solution.

An ATR-FIR study of the vibrational spectra of 1-hydroxyethane-1,1'-diphosphonic acid (HEDP), nitrilotris(methylenephosphonic acid) (NTMP) and N,N-bis(2-hydroxyethyl)aminomethylphosphonic acid (BHAMP) in aqueous solution is presented. The study was performed in the range of pH from 5 to 9, and bands assignments are given in the 2000-890 cm(-1) range. However, as phosphonates display bands due to the PO stretching vibration mainly in the 900-1200 cm(-1) range, the study is focused in this midinfrared region, which shows important changes as the pH changes, specially the nu(POH) at approximately 925 cm(-1) and nu(PO(3)(2-)) at approximately 970 cm(-1) vibrations. IR analyses give also evidences for the zwitterionic nature of BHAMP and NTMP in solution with a strong indication that the zwitterion in both compounds remains intact throughout the pH range investigated. The successive protonation steps with the decrease of pH were evidenced in the IR spectra of the three studied phosphonates.

Adsorption kinetics of phosphate and arsenate on goethite. A comparative study.

The adsorption kinetics of phosphate and arsenate on goethite is studied and compared. Batch adsorption experiments were performed at different adsorbate concentrations, pH, temperatures and stirring rates. For both oxoanions the adsorption rate increases by increasing adsorbate concentration, decreasing pH and increasing temperature. It does not change by changing stirring rate. The adsorption takes place in two processes: a fast one that takes place in less than 5 min and a slow one that takes place in several hours or more. The rate of the slow process does not depend directly on the concentration of phosphate or arsenate in solution, but depends linearly on the amount of phosphate or arsenate that was adsorbed during the fast process. Apparent activation energies and absence of stirring rate effects suggest that the slow process is controlled by diffusion into pores, although the evidence is not conclusive. The similarities in the adsorption kinetics of phosphate and arsenate are quantitatively shown by using a three-parameters equation that takes into account both the fast and the slow processes. These similarities are in line with the similar reactivity that phosphate and arsenate have in general and may be important for theoretical and experimental studies of the fate of these oxoanions in the environment.

Kinetics of phosphate adsorption on goethite: comparing batch adsorption and ATR-IR measurements.

The adsorption kinetics of phosphate on goethite has been studied by batch adsorption experiments and by in situ ATR-IR spectroscopy at different pH, initial phosphate concentrations and stirring rates. Batch adsorption results are very similar to those reported by several authors, and show a rather fast initial adsorption taking place in a few minutes followed by a slower process taking place in days or weeks. The adsorption kinetics could be also monitored by integrating the phosphate signals obtained in ATR-IR experiments, and a very good agreement between both techniques was found. At pH 4.5 two surface complexes, the bidentate nonprotonated (FeO)(2)PO(2) and the bidentate protonated (FeO)(2)(OH)PO complexes, are formed at the surface. There are small changes in the relative concentrations of these species as the reaction proceeds, and they seem to evolve in time rather independently. At pH 7.5 and 9 the dominating surface species is (FeO)(2)PO(2), which is accompanied by an extra unidentified species at low concentration. They also seem to evolve independently as the reaction proceeds. The results are consistent with a mechanism that involve a fast adsorption followed by a slow diffusion into pores, and are not consistent with surface precipitation of iron phosphate.