ABSTRACT
We report the design and characterization of external-cavity DBR lasers built with a III-V-semiconductor reflective-SOA with spot-size converter edge-coupled to SOI waveguides containing Bragg grating mirrors. The un-cooled lasers have wall-plug-efficiencies of up to 9.5% at powers of 6 mW. The lasers are suitable for making power efficient, hybrid WDM transmitters in a CMOS-compatible SOI optical platform.
Subject(s)
Lasers , Lenses , Refractometry/instrumentation , Semiconductors , Energy Transfer , Equipment Design , Equipment Failure AnalysisABSTRACT
Previously demonstrated high-order silicon ring filters typically have bandwidths larger than 100 GHz. Here we demonstrate 1-2 GHz-bandwidth filters with very high extinction ratios (~50 dB). The silicon waveguides employed to construct these filters have propagation losses of ~0.5 dB/cm. Each ring of a filter is thermally controlled by metal heaters situated on the top of the ring. With a power dissipation of ~72 mW, the ring resonance can be tuned by one free spectral range, resulting in wavelength-tunable optical filters. Both second-order and fifth-order ring resonators are presented, which can find ready application in microwave/radio frequency signal processing.
ABSTRACT
This paper presents the detailed design and characterisation of a regenerable integrated optical surface plasmon resonance immunoprobe as a detector for the triazine herbicide simazine. A sensor design theoretically optimised for use in the aqueous environment is presented and its fabrication described. Experimental results on the sensitivity to changes in bulk refractive index of the analyte and on non-specific binding of ovalbumin are presented. Binding inhibition immunoassays were conducted for simazine and the lower limit of detection determined to be 0.16 microgram/l using anti-simazine IgG antibodies and 0.11 microgram/l using anti-simazine Fab fragments. A sample test cycle of 20 min was established.
Subject(s)
Biosensing Techniques , Environmental Monitoring/methods , Herbicides/analysis , Optics and Photonics , Simazine/analysis , Surface Plasmon Resonance , Equipment Design , Immunoassay , Sensitivity and Specificity , TransducersABSTRACT
The use of indium tin oxide (ITO) thin films as electrodes for integrated optical electrochemical sensor devices is discussed. The effect of various thicknesses of ITO overlayers exhibiting low resistivity and high transparency on potassium ion-exchanged waveguides fabricated in glass substrates is investigated over the wavelength range 500-900 nm. ITO overlayers are formed by reactive thermal evaporation in oxygen, followed by annealing in air to a maximum temperature of 320 degrees C. With air as the superstrate, losses in the waveguides were found to increase dramatically above 30-nm ITO thickness for TE polarization and above 50-nm thickness for TM. Losses were increased over the whole wavelength range for a superstrate index close to that of water. A one-dimensional, multilayer waveguide model is used in the interpretation of the experimental results.
ABSTRACT
We present measurements of biomolecular binding reactions, using a new type of integrated-optical biosensor based on a planar directional coupler structure. The device is fabricated by Ag(+) - Na(+) ion exchange in glass, and definition of the sensing region is achieved by use of transparent fluoropolymer isolation layers formed by thermal evaporation. The suitability of the sensor for application to the detection of environmental pollutants is considered.
