ABSTRACT
The possibility of creating a biofuel cell based on a metal stent was shown in this study. Given the existing stent implantation approaches, the integration of a biofuel cell into a stent naturally entails capacity for biofuel cells to be installed into a human body. As a counter electrode, a hydrogel based on iota-carrageenan, polyvinyl alcohol, and PEDOT:PSS, with an immobilized glucose oxidase enzyme, was proposed. Tension tests demonstrated that the hydrogel mechanical behavior resembles that of a bovine's vein. To obtain an analytical description, the deformation curves were fitted using Gent and Ogden models, prompting the fitting parameters which can be useful in further investigations. During cyclic biaxial studies the samples strength was shown to decreases insignificantly in the first 50 cycles and, further, remains stable up to more than 100 cycles. The biofuel cell was designed with the PEDOT:PSS based material as an anode and a Co-Cr self-expanding stent as a cathode. The maximum biofuel cell power density with a glucose concentration of 5 mM was 7.87 × 10-5 W in phosphate buffer and 3.98 × 10-5 W in blood mimicking buffer. Thus, the biofuel cell integration in the self-expanding stent was demonstrated.
ABSTRACT
A novel high-tech composite biomimetic matrixes for a wide range of medical purposes were prepared. The structure of scaffolds was inspired by the architecture of native decellularized tissue: material consists of a sponge and fibrous components of different spatial geometry based on cellulose acetate with collagen or chitosan filler. The fibrous component was prepared by electrospinning, the sponge - freeze-drying technique. The influence of main technological parameters, such as freeze mode, polymer type and concentration, etc. on the fiber-sponge architecture and properties was examined. It was shown that scaffolds with different types of microstructure can be obtained employing this technique. The impregnation of chitosan or collagen filler in fiber matrix also significantly improves mechanical properties up to 40â¯MPa for strength and 600â¯MPa for Young's modulus.