DC current-voltage and impedance spectroscopy characterization of nCdS/pZnTe HJ.

This paper describes the electrical and dielectric behavior of the nCdS/pZnTe HJ by current-voltage, capacitance-voltage characteristics, and impedance spectroscopy in a temperature interval 220-350 K. A microcrystalline p-ZnTe layer and n-CdS were grown on glass/ZnO substrate by closed space sublimation method. As frontal contact to CdS, the transparent ZnO and as a back contact to ZnTe, silver conductive paste (Ag) treated at 50 °C in vacuum were used. The current-voltage results of nCdS/pZnTe HJ show a rectifying behavior. The junction ideality factor, barrier height, and series resistance values were extracted from the rectifying curves at different temperatures. The built-in voltage, carrier concentration and depletion width were obtained from the capacitance-voltage measurements. Analysis of the J-V-T and C-V-T characteristics shows that the thermionic emission and recombination current flow mechanisms dominate in the nCdS/pZnTe HJ. The dielectric study reveals that the experimental values of the AC conductivity, dielectric constant, dielectric loss, the imaginary part of the electric modulus are found to be very sensitive to frequency and temperature. The dielectric constant and dielectric loss are observed to be high at the low frequency region. The increase in the values of electric modulus with the frequency implies an increase in the interfacial polarization at the interface of nCdS/pZnTe HJ. Jonscher's universal power law shows that with increasing frequency, AC conductivity increased. The results conductivity show that the ionic conductivity and interfacial polarization are the main parameters affecting the dielectric properties of the device when the temperature changes.

Tuning structural and magnetic properties of Fe oxide nanoparticles by specific hydrogenation treatments.

Structural and magnetic properties of Fe oxide nanoparticles prepared by laser pyrolysis and annealed in high pressure hydrogen atmosphere were investigated. The annealing treatments were performed at 200 °C (sample A200C) and 300 °C (sample A300C). The as prepared sample, A, consists of nanoparticles with ~ 4 nm mean particle size and contains C (~ 11 at.%), Fe and O. The Fe/O ratio is between γ-Fe2O3 and Fe3O4 stoichiometric ratios. A change in the oxidation state, crystallinity and particle size is evidenced for the nanoparticles in sample A200C. The Fe oxide nanoparticles are completely reduced in sample A300C to α-Fe single phase. The blocking temperature increases from 106 K in A to 110 K in A200C and above room temperature in A300C, where strong inter-particle interactions are evidenced. Magnetic parameters, of interest for applications, have been considerably varied by the specific hydrogenation treatments, in direct connection to the induced specific changes of particle size, crystallinity and phase composition. For the A and A200C samples, a field cooling dependent unidirectional anisotropy was observed especially at low temperatures, supporting the presence of nanoparticles with core-shell-like structures. Surprisingly high MS values, almost 50% higher than for bulk metallic Fe, were evidenced in sample A300C.

Sources of hepatitis B virus infection in hospital environment.

Investigations on the incidence of hepatitis B antigen (HB Ag)-carriers among 1466 patients of 11 various hospitals and departments showed that sources of hepatitis infection were more numerous in hospitals for children than in those for adults. The high-risk departments were those of dialysis (5 out of 12 patients), clinical medicine (6.6%), and obstetrics and gynecology, for adults, and those of neuropsychiatry (17.9%) and clinical medicine (11.2%)for children . The highest incidence of HB Ag-carriers among the medico-sanitary personnel of 5 hospitals (436 sera) was recorded in a hospital of obstetrics and gynecology.