ABSTRACT
Anti/deicing coatings that combine active and passive methods can utilize various energy sources to achieve anti/deicing effects. However, poor photothermal or electrothermal performance and inevitable heat loss often reduce their anti/deicing efficiency. Herein, copper sulfide loaded activated biochar (AC@CuS) as photo/electric material, polydimethylsiloxane as hydrophobic component, thermally expandable microspheres as foaming agent, and an anti/deicing coating integrating thermal insulation, superhydrophobicity, photo/electrothermal effects was successfully constructed. Benefiting from the synergistic effect of superhydrophobicity and thermal insulation, the freezing time of water droplets on the coating surface is extended from 150 to 2140 s, showing excellent passive anti-icing performance. AC@CuS exhibits photo/electrothermal effects, and porous expanded microspheres reduce heat loss, which endows the coating with desirable photo/electrothermal conversion performance. Under the conditions of 0.2 W/cm2 electric power density (EPD) and 0.1 W/cm2 optical power density (OPD), the temperature of the coating increases from 24 to 96.4 and 113 °C, respectively. Interestingly, with a coheating of 0.05 W/cm2 weaker OPD and 0.05 W/cm2 lower EPD, the ice on the coating surface can be quickly melted in 2.5 min, showing synergistic deicing performance. In addition, the WCA of the prepared coating remains above 150° after mechanical damage, rain impact, UV irradiation, chemical corrosion, and high-temperature treatment, and good superhydrophobic durability ensures the anti/deicing durability of the coating.
ABSTRACT
In recent years, polyurethane has drawn great attention because of its many advantages in physical and chemical performance. In this work, firstly, polyurethane was impregnated in a non-woven fabric (NWF). Then, polyurethane-impregnated NWF was coagulated utilizing a wet phase inversion. Finally, after alkali treatment, microfiber non-woven fabrics with a porous polyurethane matrix (PNWF) were fabricated and used as substrates. SnIn4S8 (SIS) prepared by a microwave-assisted method was used as a photocatalyst and a novel SIS/PNWF substrate with multiple uses and highly efficient catalytic degradation ability under visible light was successfully fabricated. The surface morphology, chemical and crystal structures, optical performance, and wettability of SIS/PNWF substrates were observed. Subsequently, the photocatalytic performance of SIS/PNWF substrates was investigated by the decomposition of rhodamine B (RhB) under visible light irradiation. Compared with SIS/PNWF-2% (2%, the weight ratio of SIS and PNWF, same below), SIS/PNWF-5% as well as SIS/PNWF-15%, SIS/PNWF-10% substrates exhibited superior photocatalytic efficiency of 97% in 2 h. This may be due to the superior photocatalytic performance of SIS and the inherent hierarchical porous structure of PNWF substrates. Additionally, the hydrophobicity of SIS/PNWF substrates can enable them to float on the solution and further be applied on an open-water surface. Furthermore, tensile strength and recycle experiments demonstrated that SIS/PNWF substrates possessed superior mechanical strength and excellent recycle stability. This work provides a facile and efficient pathway to prepare SIS/PNWF substrates for the degradation of organic pollutants with enhanced catalytic efficiency.
ABSTRACT
A novel anti-smudge coating, based on waterborne polyurethane (WPU), Polydimethylsiloxane (PDMS) and Hexamethoxymethylmelamine (HMMM) was constructed. Specifically, hydroxyl capped WPU emulsions grafted with PDMS (WPU-g-PDMSX) were prepared firstly, then the Hexamethoxymethylmelamine (HMMM) was used as the crosslinking agent to block the polar hydrophilic hydroxyl groups and the carboxyl groups in WPU-g-PDMSX and increase the cross-linking density of the coating. Oily markers, water, hexadecane, fingerprint liquid, and common liquids in life (milk, coffee, ink and cooking oil) were utilized to demonstrate the anti-graffiti and self-cleaning characteristics of coatings. Aside from having great transparency and exceptional resistance to liquid corrosion, the coating still retains its anti-smudge capabilities even when bent or impacted, and they also exhibit 5B adhesion and 5H pencil hardness. This work provides novel idea and strategy for the preparation of WPU anti-smudge coatings.
