An up-conversion fluorescence lateral-flow immunoassay for rapid detection of Daratumumab in serum protein electrophoresis clinical samples.

BACKGROUND: Daratumumab (DARA) is a commonly used monoclonal antibody (mAb) drug for the treatment of multiple myeloma (MM). Its appearance as a visible abnormal band in the γ-region of a serum protein electrophoresis (SPEP) gel may interfere with the SPEP result interpretation. With the advantages of portability and rapid testing capabilities, up-conversion fluorescence lateral-flow immunoassay (LFA) can be an ideal solution to detect DARA interference. METHODS: An up-conversion fluorescence LFA strip was designed and constructed to perform semi-quantitative DARA testing in clinical samples. The LFA strip test was evaluated for limit of detection (LOD), dynamic range, and analytical interference. RESULTS: To demonstrate the clinical utility of the LFA strip, 43 SPEP-positive patient serum samples were tested for the presence of DARA, and the results exactly matched the DARA usage history in patient medical records. CONCLUSIONS: The performance of the up-conversion fluorescence LFA strip meets the purpose of clarifying DARA interference in SPEP results. It may be used as an independent and objective confirmation of the presence of DARA in clinical samples. The LFA strip offers a cost-effective rapid on-site test to check for DARA interference alongside standard SPEP equipment, which significantly improves the interpretation of ambiguous SPEP results involving DARA, and does not intervene the current SPEP workflow in clinical laboratory practice.

Comparison of liquid chromatography-high-resolution tandem mass spectrometry (MS2) and multi-stage mass spectrometry (MS3) for screening toxic natural products.

Background: Liquid chromatography-high-resolution mass spectrometry (LC-HR-MS) has emerged as a powerful analytical technology for compound screening in clinical toxicology. To evaluate the potential of LC-HR-MS3 in detecting toxic natural products, a spectral library of 85 natural products (79 alkaloids) that contains both MS2 and MS3 mass spectra was constructed and used to identify the natural products. Samples were analyzed using an LC-HR-MS3 method and the generated data were matched to the spectral library to identify the natural products. Methods: To test the performance of the LC-HR-MS3 method in different sample matrices, the 85 natural product standards were divided into three groups to separate structural isomers and avoid ion suppression effects caused by co-elution of multiple analytes. The grouped analytes were spiked into drug-free serum and drug-free urine to produce contrived clinical samples. Results: The compound identification results of the 85 natural products in urine and serum samples were obtained. The match scores using both MS2 and MS3 mass spectra and those using only MS2 mass spectra were compared at 10 different analyte concentrations. The two types of data analysis provided identical identification results for the majority of the analytes (96% in serum, 92% in urine), whereas, for the remaining analytes, the MS2-MS3 tree data analysis had better performance in identifying them at lower concentrations. Conclusion: This study shows that in comparison to LC-HR-MS (MS2), LC-HR-MS3 can increase the performance in identification of a small group of the toxic natural products tested in serum and urine specimens.

Study of ß1-transferrin and ß2-transferrin using microprobe-capture in-emitter elution and high-resolution mass spectrometry.

Cerebrospinal fluid (CSF) leak can be diagnosed in clinical laboratories by detecting a diagnostic marker ß2-transferrin (ß2-Tf) in secretion samples. ß2-Tf and the typical transferrin (Tf) proteoform in serum, ß1-transferrin (ß1-Tf), are Tf glycoforms. An innovative affinity capture technique for sample preparation, called microprobe-capture in-emitter elution (MPIE), was incorporated with high-resolution mass spectrometry (HR-MS) to study the Tf glycoforms and the primary structures of ß1-Tf and ß2-Tf. To implement MPIE, an analyte is first captured on the surface of a microprobe, and subsequently eluted from the microprobe inside an electrospray emitter. The capture process is monitored in real-time via next-generation biolayer interferometry (BLI). When electrospray is established from the emitter to a mass spectrometer, the analyte is immediately ionized via electrospray ionization (ESI) for HR-MS analysis. Serum, CSF, and secretion samples were analyzed using MPIE-ESI-MS. Based on the MPIE-ESI-MS results, the primary structures of ß1-Tf and ß2-Tf were elucidated. As Tf glycoforms, ß1-Tf and ß2-Tf share the amino acid sequence but contain varying N-glycans: (1) ß1-Tf, the major serum-type Tf, has two G2S2 N-glycans on Asn413 and Asn611; and (2) ß2-Tf, the major brain-type Tf, has an M5 N-glycan on Asn413 and a G0FB N-glycan on Asn611. The resolving power of the innovative MPIE-ESI-MS method was demonstrated in the study of ß2-Tf as well as ß1-Tf. Knowing the N-glycan structures on ß2-Tf allows for the design of more novel test methods for ß2-Tf in the future.

Mass spectrometry quantitation of immunosuppressive drugs in clinical specimens using online solid-phase extraction and accurate-mass full scan-single ion monitoring.

Introduction: Therapeutic drug monitoring (TDM) of immunosuppressants is essential for optimal care of transplant patients. Immunoassays and liquid chromatography-mass spectrometry (LC-MS) are the most commonly used methods for TDM. However, immunoassays can suffer from interference from heterophile antibodies and structurally similar drugs and metabolites. Additionally, nominal-mass LC-MS assays can be difficult to optimize and are limited in the number of detectable compounds. Objectives: The aim of this study was to implement a mass spectrometry-based test for immunosuppressant TDM using online solid-phase extraction (SPE) and accurate-mass full scan-single ion monitoring (FS-SIM) data acquisition mode. Methods: LC-MS analysis was performed on a TLX-2 multi-channel HPLC with a Q-Exactive Plus mass spectrometer. TurboFlow online SPE was used for sample clean up. The accurate-mass MS was set to positive electrospray ionization mode with FS-SIM for quantitation of tacrolimus, sirolimus, everolimus, and cyclosporine A. MS2 fragmentation pattern was used for compound confirmation. Results: The method was validated in terms of precision, analytical bias, limit of quantitation, linearity, carryover, sample stability, and interference. Quantitation of tacrolimus, sirolimus, everolimus, and cyclosporine A correlated well with results from an independent reference laboratory (r = 0.926-0.984). Conclusions: Accurate-mass FS-SIM can be successfully utilized for immunosuppressant TDM with good correlation with results generated by standard methods. TurboFlow online SPE allows for a simple "protein crash and shoot" sample preparation protocol. Compared to traditional MRM, analyte quantitation by FS-SIM facilitates a streamlined assay optimization process.

Microprobe-Capture In-Emitter Elution: An Affinity Capture Technique to Directly Couple a Label-Free Optical Sensing Technology with Mass Spectrometry for Protein Analysis.

Affinity capture of an analyte by a capture agent is one of the most effective sample preparation approaches in mass spectrometry (MS), especially top-down MS. We describe a new affinity capture technique for protein targets, called microprobe-capture in-emitter elution (MPIE), which can directly couple a label-free optical sensing technology (next-generation biolayer interferometry, BLI) with MS. To implement MPIE, an analyte is first captured on the surface of a microprobe and subsequently eluted from the microprobe inside an electrospray emitter. The capture process is monitored in real-time via BLI. When electrospray is established from the emitter to a mass spectrometer, the analyte is immediately ionized via electrospray ionization (ESI) for MS analysis. By this means, BLI and MS are directly coupled in the form of MPIE-ESI-MS. The performance of MPIE-ESI-MS was demonstrated by the analysis of ß-amyloid 1-40 and transferrin using both standard samples and human specimens. In comparison to conventional affinity capture techniques such as bead-based immunoprecipitation, MPIE innovates the affinity capture methodology by introducing real-time process monitoring and providing binding characteristics of analytes, offering more information-rich experiment results. Thus, MPIE is a valuable addition to the top-down MS sample preparation toolbox, and MPIE-ESI-MS can be useful for identification and characterization of targets of interest.

Neutral-Coating Capillary Electrophoresis Coupled with High-Resolution Mass Spectrometry for Top-Down Identification of Hemoglobin Variants.

BACKGROUND: Identification of hemoglobin (Hb) variants is of significant value in the clinical diagnosis of hemoglobinopathy. However, conventional methods for identification of Hb variants in clinical laboratories can be inadequate due to the lack of structural characterization. We describe the use of neutral-coating capillary electrophoresis coupled with high-resolution mass spectrometry (CE-HR-MS) to achieve high-performance top-down identification of Hb variants. METHODS: An Orbitrap Q-Exactive Plus mass spectrometer was coupled with an ECE-001 capillary electrophoresis (CE) unit through an EMASS-II ion source. A PS1 neutral-coating capillary was used for CE. Samples of red blood cells were lysed in water and diluted in 10 mM ammonium formate buffer for analysis. Deconvolution of raw mass spectrometry data was carried out to merge multiple charge states and isotopic peaks of an analyte to obtain its monoisotopic mass. RESULTS: The neutral-coating CE could baseline separate individual Hb subunits dissociated from intact Hb forms, and the HR-MS could achieve both intact-protein analysis and top-down analysis of analytes. A number of patient samples that contain Hb subunit variants were analyzed, and the variants were successfully identified using the CE-HR-MS method. CONCLUSIONS: The CE-HR-MS method has been demonstrated as a useful tool for top-down identification of Hb variants. With the ability to characterize the primary structures of Hb subunits, the CE-HR-MS method has significant advantages to complement or partially replace the conventional methods for the identification of Hb variants.