[Feasibility analysis of the application of programmed process endoscopic lateral neck dissection via chest-breast approach in papillary thyroid carcinoma surgery].

Objective: To explore the feasibility of endoscopic lymph node dissection(LND) with programmed breast approach for the treatment of papillary thyroid cancer. Methods: A case series study. The clinical data of 39 patients with papillary thyroid cancer who underwent endoscopic LND treatment with programmed breast approach in Shenzhen People's Hospital from January to November 2022 were retrospectively analyzed. There were 10 males and 29 females, aged (35.95±10.17) years. LND time, total surgical time, intraoperative bleeding volume, postoperative drainage volume, postoperative hospital stay and postoperative complications were analyzed. Results: Among 39 patients, there were 18 cases of unilateral thyroid cancer, 21 cases of bilateral thyroid cancer, 35 cases of unilateral LND, and 4 cases of bilateral LND. The maximum diameter of thyroid cancer lesions was (1.48±0.69) cm, and the maximum diameter of lymph node metastases was (1.63±0.58)cm. The operative time of unilateral neck dissection was (124.11±19.92) min (102-170 min), and the total operative time was (226.42±55.68) min (110-390 min). The number of lymph nodes cleaned was (32.40±10.44)(12-54), the number of metastasis and detection was 207/1 393. The postoperative drainage volume was (174.64±82.33) ml(41-350 ml). There were no neck hematomas, no skin burns or no shrugging disorders in the postoperative period. There were 7 cases of numbness and discomfort in neck skin sensation, which gradually relieved after half a year. Postoperative discharge time (4.77±1.94) d(3-15 d). Conclusion: It is safe and feasible to treat papillary thyroid cancer with endoscopic LND with programmed breast approach, which can improve surgical efficiency and clinical application value.

[Pay close attention to the current characteristics and development trend of severe acute hepatitis with unknown etiology in children worldwide].

In the past, acute hepatitis of unknown etiology in children was sporadic. However, during the last three weeks, there has been a trend of short-term outbreak around the world. As of May 3, 2022, at least 228 cases had been reported in about 20 countries and regions. The main clinical manifestations of the children included abdominal pain, diarrhea, vomiting, jaundice, and hepatomegaly. The liver functions including alanine aminotransferase and total bilirubin increased sharply. About 8.8% of the children needed liver transplantation. The etiology is not clear, but adenovirus type 41 is currently considered to be the most likely cause. Clinicians should keep alert to acute hepatitis of unknown etiology in children, strengthen epidemic surveillance, clinical treatment, and carry out necessary health education.

[Pure titanium denture large-span frameworks additively manufactured with selective laser melting].

Objective: To investigate the accuracy of pure titanium and cobalt-chromium alloy frameworks fabricated using the additive manufacturing (AM) of selective laser melting technology (SLM) for the mandibular implant-supported fixed prostheses and the maxillary removable partial denture (RPD), and to provide a reference for clinical application of SLM pure titanium frameworks. Methods: One edentulous mandibular model with implants and screw fixed abutments at bilateral canines and the first molars was selected and used as the mandibular full arch implant-supported model. At the same time, a Kennedy class Ⅰ maxillary dentition defect model was selected. The digital models were obtained by scanning the dental models, and the metal frameworks of the mandibular full arch implant-supported denture and the maxillary RPD (design model) were designed using the 3 Shape software. Meanwhile, 12 mandibular frameworks in the cobalt-chromium alloy and the pure titanium (6 in each group were treated with heat treatment, while the other 6 were not treated), and 7 maxillary frameworks in the cobalt-chromium alloy and the pure titanium were respectively made by SLM with the improved dual-laser metal printer. The axial direction of the printing powder accumulation was taken as the Z-axis. During the design process, the software (3Shape Dental System 2018) automatically generated the X-axis and Y-axis, X axis was the sagittal axis of the dental model and Y axis was the coronal axis of the dental model. The deviation of the interface center of the abutment of the digital model of the mandibular frameworks from the design model in the X, Y and Z axes was analyzed. As for the trueness of the mandibular framework, the larger the deviation data was, the worse the trueness was. The deviation of the whole maxillary framework and 7 measuring points (palatal plate center point and bilateral occlusal rests, I bars, proximal plates) were analyzed. The fitness of the whole maxillary framework to the design model was expressed by root mean square (RMS) of the deviation data, and the fitness of measuring points was expressed by the mean±standard deviation of the data. The trueness differences of each group before and after heat treatment of the mandibular framework and the fitness of the maxillary framework were compared. Results: The cobalt-chromium alloy frameworks showed lower trueness on the X, Y, Z-axes [(96.3±12.1), (86.3±11.4), (61.2±13.2) µm] than did the pure Ti frameworks [(82.3±11.2), (72.2±10.2), (51.2±11.6) µm] by SLM, and the heat treatment could reduce the discrepancy between the SLM frameworks and STL models, for pure titanium frameworks [(62.4±11.3), (55.2±13.2), (41.3±10.8) µm] and for cobalt-chromium alloy [(84.5±10.5), (72.3±11.2), (54.2±11.6) µm]. For the thin RPD major frameworks, pure titanium had better fitness [(121.3±17.0) µm] than cobalt-chromium alloy [(174.0±18.3) µm] by SLM, and the difference was statistically significant (P<0.05). Conclusions: Pure titanium frameworks fabricated by SLM additive manufacturing technology exhibited better fitness and trueness than did the Co-Cr frameworks after heat treatment respectively, and this satisfied the requirements of implant-supported fixed prostheses and RPD major metal frameworks.

[The application of continuous glucose monitoring in the management of hepatic glycogen storage disease].

Objective: Continuous glucose monitoring (CGM) were performed in children with hepatic glycogen storage disease (GSD) to accurately understand the situation of glucose levels during their treatment, and to provide support for optimizing their nutritional management. Methods: In this retrospective research, 42 patients with hepatic GSD who under went 72 h CGM were collected from Department of Pediatrics, Tongji Hospital of Tongji Medical College, Huazhong University of Science and Technology from October 2019 to January 2020. According to the genetic test results, they were divided into 5 groups: type Ⅰa, type Ⅰb, type Ⅲa, type Ⅵ and type Ⅸa. After long-term follow up and regular treatment, the clinical data (induding course, age, height, weight and biochemical parameters, etc.) on the day of CGM were summarized, and 72 h CGM were performed to assess the occurrence of hypoglycemia and hyperglycemia.χ² test, Fisher exact probability method, t test, analysis of variance or nonparametric test were used for comparison between groups. Results: Forty-two cases of hepatic GSD patients included 25 males and 17 females (20 cases of type Ⅰa, 3 cases of type Ⅰb, 10 cases of type Ⅲa, 3 cases of type Ⅵ and 6 cases of type Ⅸa).The age was 9.5 (6.7, 12.9) years, and the course of disease was 6.8 (5.1, 11.3) years. The average levels of glucose of the patients were all normal. However, the levels of standard deviation of blood glucose (SDBG) and mean amplitude of glycemic excursion (MAGE) were significantly different (F=2.747, 3.029,both P<0.05). Among them, the SDBG of type Ⅰa and Ⅲa were significantly higher than those of type Ⅸa ((1.10±0.36), (0.98±0.30) vs. (0.62±0.26) mmol/L, t=3.010, 2.440, both P<0.05), while the MAGE of type Ⅰ was higher than that of Ⅸa and Ⅲa ((2.3±0.9) mmol/L vs. (1.2±0.6) and (1.7±0.6) mmol/L, t=2.734, 2.302, both P<0.05, respectively). Conclusions: CGMS can accurately assess the fluctuations of blood glucose and effectively detect hidden hypoglycemia and hyperglycemia in hepatic GSD patients. For different types of hepatic GSD, individualized corn starch treatment doses should be given according to the different situation of blood glucose, so as to optimize the patient's treatment and improve their prognosis.

[Performance of human papillomavirus typing test in cervical precancer lesions and cervical cancer screening].

Objective: To evaluate the performance of Hybribio human papillomavirus (HPV) typing test kit for high risk HPV-DNA typing detection in screening of cervical precancer lesions. Methods: A total of 9 914 women were recruited in Henan, Shanxi, and Guangdong provinces from June to July 2017. All women underwent HPV DNA test. The women who diagnosed as HPV positive and cytological examination ≥ atypical squamous cells of undetermined significance (ASCUS) or HPV negative and cytological examination≥low-grade squamous intraepithelial lesions (LSIL) underwent colposcopy biopsy and pathological examination. Using the pathological diagnosis as the gold standard, the sensitivity, specificity, positive predictive value (PPV), negative predictive value (NPV), and 95% confidence interval (CI) of high-risk HPV and HPV16/18 tests were calculated. Results: The mean age of 9 914 subjects was (45.0±9.3) years old. Among them, 1 302 subjects were detected as high risk HPV positive, including 211 of HPV16 positive and 64 of HPV18 positive. According to the pathological gold standard of cervical intraepithelial neoplasia grade 2 (CIN2) or worse, the sensitivity and specificity of high risk-HPV and HPV 16/18 for triaging ASCUS women were 90.6% (95%CI: 75.8%-96.8%) and 78.0% (95%CI: 74.5%-81.2%) as well as 56.3% (95%CI: 39.3%-71.8%) and 95.7% (95%CI: 93.8%-97.1%), respectively. The sensitivity and specificity of high risk-HPV and HPV 16/18 for cervical precancer lesions screening were 95.1% (95%CI: 88.1%-98.1%) and 87.6% (95%CI: 86.9%-88.2%) as well as 65.9% (95%CI: 55.1%-75.2%) and 97.8% (95%CI: 97.5%-98.1%), respectively. Conclusions: The Hybribio HPV test kit has a relative high sensitivity and specificity for cervical precancer lesions screening and ASCUS triaging. It is reliable for HPV DNA detection and cervical cancer screening.

Survey of infection and determination of the transmission vector of Onchocerca fasciata in camels (Camelus bactrianus) in Inner Mongolia, China.

Onchocerciasis in camels is caused by adult Onchocerca spp. and results in great economic losses to the camel industry. However, only a few studies on Onchocerca have been conducted, especially regarding the intermediate host and vector(s). In the present study, 192 camels were examined from December and January during 2013 and 2016, and the filarial larvae suspected to be Onchocerca spp. were further identified. Furthermore, aquatic dipteran insects in the living environment of camels were collected from May to September between 2013 and 2017 and dissected. Eventually, onchocercal lesions were observed in 95 of 192 (49%) camels and the captured insects were classified into 49 species from 42 genera in 21 families, among which 18 species were newly recorded in Inner Mongolia and 14 were haematophagous species. The filarial larvae were found in Culicoides puncticollis and identified as Onchocerca fasciata, indicating that C. puncticollis is the vector of O. fasciata in Inner Mongolia. These findings provide an estimate of onchocerciasis infection in camels and an alternative method of identifying insects and screening vectors using molecular methods. Important data are also provided for the diagnosis and control of onchocerciasis, thereby further filling the gap in knowledge regarding transmission vectors in China.

[Effect of two kinds of materials on the prevention of early erosive enamel wear].

Objective: To investigate the preventive effect of resin infiltration and adhesive on early erosive enamel wear. Methods: Orthodontic reduction premolars collected from Central Laboratory of Nanjing Stomatological Hospital, Medical School of Nanjing University were used to prepare 70 specimens. Forty samples were divided into eight groups (n=5) and treated with different conditions (pH=1.6, 2.4, 3.2 or 4.0 hydrochloric acid solution, etching time was 30 or 60 s), and the conditions for obtaining early erosive enamel samples were selected. Based on this procedure, thirty early erosive enamel samples were made and divided into three groups: control group, resin infiltration group, and adhesive group. And the treatment of 30 days acid abrasion cycle was carried out. Confocal microscopy was used to measure the thickness changes of enamel or material before and after cycle. Results: Early erosive enamel samples was obtained when pH was 4.0 and etching time was 60 s. After 30 days cycle, the wear of enamel was (29.71±6.72) µm in control group, (5.60±2.24) µm in resin infiltration group and (2.89±1.03) µm in adhesive group. In infiltration group and adhesive group, lower enamel was not affected by the cycle, and the material loss ratios of the infiltration resin group and adhesive group were 0.41±0.14 and 0.29±0.13, respectively. The ratio of material loss was not significantly different (P>0.05). But infiltration group lost (12.95±2.22) µm of enamel during the application of the material. Conclusions: Resin infiltration and adhesive have the same short-term protective effect against early erosive enamel wear. Adhesive has less damage to enamel and better effect.

[Detection and analysis of FAM19A4 promoter methylation in cervical exfoliated cells].

Objective: To investigate the cinical value of FAM19A4promoter methylation in cervicalexfoliated cells for triage of cervical cancer. Methods: A total of 162 high-risk HPV-infected patients who were pathologically confirmed as different cervical lesions from August 2017 to December 2017 were collected in Guangdong Women and Children Hospital. Taqman probe-based quantitative PCR (qPCR) was used to detect the methylation of FAM19A4 promoterin different grades of cervical lesions, and the value of FAM19A4 methylation in predicting cervical HSIL and the above lesions was calculated by diagnostic test. Results: (1)The positive rates of FAM19A4 methylation in cervical exfoliated cells increased with the severity of cervical lesions, which were 7.69% (4/52) , 34.62% (9/26) , 55.56% (20/36) , 95.83% (46/48) in normal cervix/cervicitis, cervical LSIL, HSIL, and cervical cancer, respectively(P<0.05).(2)There was no significant difference in the detection rates of FAM19A4 methylation between different age groups, pathological types, clinical stage, tumor size and lymph node metastasis status (P>0.05). (3) The specificity and positive predictive value of FAM19A4 methylation in detecting cervical HSIL alone and ≥HSIL lesions were the optimal, with the AUC of 0.69 and 0.84, respectively. When combined with HPV16/18 genotyping, the sensitivity was significantly improved. Conclusions: The detection of FAM19A4 promoter methylation in cervical exfoliated cells has a high clinical value of discriminating ≥HSIL lesions; and the cotest of methylated FAM19A4 and HPV16/18 genotyping can identify ≥HSIL lesions more sensitively.