Pollution characteristics and quantitative source apportionment of heavy metals within a zinc smelting site by GIS-based PMF and APCS-MLR models.

The abandoned smelters present a substantial pollution threat to the nearby soil and groundwater. In this study, 63 surface soil samples were collected from a zinc smelter to quantitatively describe the pollution characteristics, ecological risks, and source apportionment of heavy metal(loid)s (HMs). The results revealed that the average contents of Zn, Cd, Pb, As, and Hg were 0.4, 12.2, 3.3, 5.3, and 12.7 times higher than the risk screening values of the construction sites, respectively. Notably, the smelter was accumulated heavily with Cd and Hg, and the contribution of Cd (0.38) and Hg (0.53) to ecological risk was 91.58%. ZZ3 and ZZ7 were the most polluted workshops, accounting for 25.7% and 35.0% of the pollution load and ecological risk, respectively. The influence of soil parent materials on pollution was minor compared to various workshops within the smelter. Combined with PMF, APCS-MLR and GIS analysis, four sources of HMs were identified: P1(25.5%) and A3(18.4%) were atmospheric deposition from the electric defogging workshop and surface runoff from the smelter; P2(32.7%) and A2(20.9%) were surface runoff of As-Pb foul acid; P3(14.5%) and A4(49.8%) were atmospheric deposition from the leach slag drying workshop; P4(27.3%) and A1(10.8%) were the smelting process of zinc products. This paper described the distribution characteristics and specific sources of HMs in different process workshops, providing a new perspective for the precise remediation of the smelter by determining the priority control factors.

Driving factors for distribution and transformation of heavy metals speciation in a zinc smelting site.

Heavy metal pollution at an abandoned smelter pose a significant risk to environmental health. However, remediation strategies are constrained by inadequate knowledge of the polymetallic distribution, speciation patterns, and transformation factors at these sites. This study investigates the influence of soil minerals, heavy metal occurrence forms, and environmental factors on heavy metal migration behaviors and speciation transformations. X-ray diffraction analysis revealed that the minerals associated with heavy metals are mainly hematite, franklinite, sphalerite, and galena. Sequential extraction results suggest that lead and zinc are primarily present in the organic-sulfide fractions (F4) and residual form (F5) in the soil, accounting for over 70% of the total heavy metal content. Zinc displayed greater instability in carbonate-bound (16%) and exchangeable (2%) forms. The migration and diffusion patterns of heavy metals in the subsurface environment were visualized through the simulation of labile state heavy metals, demonstrating high congruence with groundwater pollution distribution patterns. The key environmental factors influencing heavy metal stable states (F4 and F5) were assessed by integrating random forest models and redundancy analysis. Primary factors facilitating Pb transformation into stable states were available phosphorus, clay content, depth, and soil organic matter. For Zn, the principal drivers were Mn oxides, soil organic matter, clay content, and inorganic sulfur ions. These findings enhance understanding of the distribution and transformation of heavy metal speciation and can provide valuable insights into controlling heavy metal pollution at non-ferrous smelting sites.

Geochemical fractionation and potential release behaviour of heavy metals in lead‒zinc smelting soils.

The lack of understanding of heavy metal speciation and solubility control mechanisms in smelting soils limits the effective pollution control. In this study smelting soils were investigated by an advanced mineralogical analysis (AMICS), leaching tests and thermodynamic modelling. The aims were to identify the partitioning and release behaviour of Pb, Zn, Cd and As. The integration of multiple techniques was necessary and displayed coherent results. In addition to the residual fraction, Pb and Zn were predominantly associated with reducible fractions, and As primarily existed as the crystalline iron oxide-bound fractions. AMICS quantitative analysis further confirmed that Fe oxyhydroxides were the common dominant phase for As, Cd, Pb and Zn. In addition, a metal arsenate (paulmooreite) was an important mineral host for Pb and As. The pH-stat leaching indicted that the release of Pb, Zn and Cd increased towards low pH values while release of As increased towards high pH values. The separate leaching schemes were associated with the geochemical behaviour under the control of minerals and were confirmed by thermodynamic modelling. PHREEQC calculations suggested that the formation of arsenate minerals (schultenite, mimetite and koritnigite) and the binding to Fe oxyhydroxides synchronously controlled the release of Pb, Zn, Cd and As. Our results emphasized the governing role of Fe oxyhydroxides and secondary insoluble minerals in natural attenuation of heavy metals, which provides a novelty strategy for the stabilization of multi-metals in smelting sites.

Multi-technological integration in a smelting site: Visualizing pollution characteristics and migration pattern.

Heavy metal(loid)s pollution of industrial legacies has become a severe environmental issue worldwide. Linking soil pollution to groundwater contaminant plumes would make invisible pollution features visible across the site, but related studies are lacking and require the convergence of multiple technologies. This study uniformly managed the soil and groundwater data in a 3D visualization model to pellucidly assess the spatial distribution of critical contaminants beyond simple drilling information. The distribution of Pb, Zn, As, and Cd in soil-groundwater system has a strong correlation to historical production, substance type, soil property, and groundwater flow direction. Over 2600 measurements of High-density electrical resistivity tomography (ERT) data were used to guarantee the exactness of soil structures. Hydraulic conductivity showed a strongest correlation (R2 = 0.86), yielding a calibrated model to reveal the anisotropic and contaminant transport in the region, with the consequent minimize the drilling tests. This study provides a template for the description of a verifiable scenario of hydrogeological conditions and pollution characteristics at smelting sites, coupled with traditional exploration and non-invasive techniques. The findings highlight the significance of visualizing the internal state of the soil-groundwater system under consideration, thus providing a basis for targeted control measures against site contamination.

The assembly process and co-occurrence patterns of soil microbial communities at a lead smelting site.

The potential toxic elements of the site are diverse and complex, seriously threatening the land utilization potential and soil ecological function. Microbial community is critical to maintaining ecosystem function, their assembly processes and diversity play an essential role in predicting changes in soil ecological function. However, our understanding of the mechanisms that shape community composition and successional direction in complex polluted environments is very limited. In this study, to explore the mechanisms driving community assembly and symbiosis in different contaminated regional environments, the biological characteristics of bacterial and fungal communities in four different polluted areas of a typical lead smelting site were studied. Contamination by PTEs appears to increase microbial networks, as well as altering microbial community composition, with relative abundance of dominant phyla such as Actinomycetes and Acidobacteria decreasing, whilst Proteobacteria and Ascomycota increased, this indicated that communities may shift from K-strategy to r-strategy and become opportunistic. Dispersal limitation (DL, 42 %-86 %), drift (Dr, 8 %-37 %) and homogeneous selection (HoS, 1 %-31 %) proved to be the important community assembly process. The top ten bins controlling the contribution of different biological processes were identified, and the relative abundance of these bacterial and fungal taxa varied with CPI. Collectively, our results suggest that CPI and nutrient availability regulate soil bacterial and fungal community assembly processes. The results of this study provide potential guidance for community regulation in the process of ecological restoration and mitigating degraded soils at smelting sites.

Effect of potentially toxic elements on soil multifunctionality at a lead smelting site.

Contaminated soil at smelting sites affects land utilization and environmental regulation, resulting in soil degradation. However, the extent to which potentially toxic elements (PTEs) contribute to site soil degradation and the relationship between soil multifunctionality and microbial diversity in the process remains poorly understood. In this study, we investigated changes in soil multifunctionality and the correlation between soil multifunctionality and microbial diversity under the influence of PTEs. The change in microbial community diversity was closely related to changes in soil multifunctionality caused by PTEs. Microbial diversity, not richness, drives the delivery of ecosystem services in smelting site PTEs-stressed environments. Structural equation modeling identified that soil contamination, microbial taxonomic profile and microbial functional profile could explain 70% of the variance in soil multifunctionality. Furthermore, our findings demonstrate that PTEs limit soil multifunctionality by affecting soil microbial communities and functionality, whilst the positive effect of microorganisms on soil multifunctionality was mainly driven by the fungal diversity and biomass. Finally, specific fungal genera closely related to soil multifunctionality were identified, with saprophytic fungi being particularly important for maintaining multiple soil functions. The results of the study provide potential guidance for the remediation, pollution control practices and mitigation of degraded soils at smelting sites.

Anthropogenic processes drive heterogeneous distributions of toxic elements in shallow groundwater around a smelting site.

Smelting activities have a far-reaching influence on the quality of soil and groundwater, while most studies have neglected the information on the pollution characteristics of groundwater. The hydrochemical parameters of shallow groundwater and the spatial distributions of toxic elements were investigated in this study. Correlations analysis and groundwater evolution revealed that the major ions were primarily determined by silicate weathering and calcite dissolution process, and anthropogenic processes had a significant effect on groundwater hydrochemistry. Almost 79%, 71%, 57%, 89%, 100%, and 78.6% of samples exceeded the standards of Cd, Zn, Pb, As, SO42-, and NO3-, and their distribution is closely related to the production process. Analysis of soil geochemistry indicated that the relatively mobile forms of toxic elements strongly influence the origin and concentration in shallow groundwater. Besides, rainfall with high magnitude would lead to a decrease of toxic elements in shallow groundwater, whereas the area once stacked waste residue was the opposite. It is recommended to strengthen risk management of the limited mobility fraction while devising a plan for waste residue treatment in accordance with the local pollution conditions. The research on controlling the mechanism of toxic elements in shallow groundwater, along with sustainable development in the study area and other smelting zones may benefit from this study.

Soil heavy metal pollution from Pb/Zn smelting regions in China and the remediation potential of biomineralization.

Smelting activities pose serious environmental problems due to the local and regional heavy metal pollution in soils they cause. It is therefore important to understand the pollution situation and its source in the contaminated soils. In this paper, data on heavy metal pollution in soils resulting from Pb/Zn smelting (published in the last 10 years) in China was summarized. The heavy metal pollution was analyzed from a macroscopic point of view. The results indicated that Pb, Zn, As and Cd were common contaminants that were present in soils with extremely high concentrations. Because of the extreme carcinogenicity, genotoxicity and neurotoxicity that heavy metals pose, remediation of the soils contaminated by smelting is urgently required. The primary anthropogenic activities contributing to soil pollution in smelting areas and the progressive development of accurate source identification were performed. Due to the advantages of biominerals, the potential of biomineralization for heavy metal contaminated soils was introduced. Furthermore, the prospects of geochemical fraction analysis, combined source identification methods as well as several optimization methods for biomineralization are presented, to provide a reference for pollution investigation and remediation in smelting contaminated soils in the future.

Geochemical partitioning and spatial distribution of heavy metals in soils contaminated by lead smelting.

Heavy metals (HMs) pollution is a universal and complex problem at lead smelting sites. Further understanding on the distribution, coexistence relationship and occurrence form of multi-metals in soils should be taken prior to restoration on the contaminated sites. In this study, 222 soil samples in a typical abandoned lead smelting site were investigated to understand the spatial distribution and geochemical partitioning of HMs. The results showed that soil quality was seriously threatened by As, Pb and Cd, which expressed high spatial heterogeneity. Integration of sequential extraction, X-ray photoelectron spectroscopy and mineral liberation analysers were employed to qualify the geochemical partitioning of HMs. The data showed that Pb and As were mainly partitioned in the reducible phase and residue phase, where the maximum of As were 18% and 79%, and the maximum of Pb were 31% and 64%, respectively, whilst Cd was mainly partitioned with residue phase (about 25%) and weakly acid soluble phase (about 18%). Paulmooreite was the major important mineral host for Pb and As, whereas Cd predominantly existed in willemite. These minerals containing HMs could usually with Fe reside in the octahedral layer of clay minerals such as montmorillonite, and may also reside in the interlayer. Quartz, montmorillonite and goethite were closely associated with HMs minerals in contaminated soils, which limited vertical migration of HMs and potential risks to groundwater. The results enhanced the understanding of spatial distribution and occurrence behavior of HMs, whilst providing potential benefits to heavy metal stabilization and risks control at abandoned non-ferrous metal smelting sites.

Remediation of arsenic-contaminated paddy field by a new iron oxidizing strain (Ochrobactrum sp.) and iron-modified biochar.

Iron-oxidizing strain (FeOB) and iron modified biochars have been shown arsenic (As) remediation ability in the environment. However, due to the complicated soil environment, few field experiment has been conducted. The study was conducted to investigate the potential of iron modified biochar (BC-FeOS) and biomineralization by a new found FeOB to remediate As-contaminated paddy field. Compared with the control, the As contents of GB (BC-FeOS), GF (FeOB), GFN (FeOB and nitrogen fertilizer), GBF (BC-FeOS and FeOB) and GBFN (BC-FeOS, FeOB and nitrogen fertilizer) treatments in pore water decreased by 36.53%-80.03% and the microbial richness of iron-oxidizing bacteria in these treatments increased in soils at the rice maturation stage. The concentrations of available As of GB, GF, GFN, GBF and GBFN at the tillering stage were significantly decreased by 10.78%-55.48%. The concentrations of nonspecifically absorbed and specifically absorbed As fractions of GB, GF, GFN, GBF and GBFN in soils were decreased and the amorphous and poorly crystalline hydrated Fe and Al oxide-bound fraction was increased. Moreover, the As contents of GB, GF, GFN, GBF and GBFN in rice grains were significantly decreased (*P < 0.05) and the total As contents of GFN, GBF and GBFN were lower than the standard limit of the National Standard for Food Safety (GB 2762-2017). Compared with the other treatments, GBFN showed the greatest potential for the effective remediation of As-contaminated paddy fields.

Spatial distribution of toxic metal(loid)s at an abandoned zinc smelting site, Southern China.

Toxic metal(loid) (TM) soil pollution at large-scale non-ferrous metal smelting contaminated sites is of great concern in China, but there are no detailed reports relating to them. A comprehensive study was conducted to determine contamination characteristics and horizontal and vertical spatial distribution patterns of soils at an abandoned zinc smelting site in Southern China. The spatial distribution of TMs revealed that soil environmental quality was seriously threatened, with Cd, Zn, As, Pb and Hg being the main contaminants present. The distribution of all TMs showed strong spatial heterogeneity and were expressed as a "patchy aggregation" pattern due to strong anthropogenic and production activities. Vertical migration of TMs indicated that the pollutants were mainly concentrated in the fill layers. Different contaminants had various migration depths, with migration occurring as: Cd > Hg > As > Zn > Pb> Cu> Mn> Sb. Analysis of their spatial variability showed that As, Pb, Cd and Hg had strong regional spatial variability. This research provides a new approach to comprehensively analyze TM pollution characteristics of non-ferrous smelting sites. It provides valuable information for guiding post-remediation strategies at abandoned non-ferrous metal smelting sites.

Microbial driven iron reduction affects arsenic transformation and transportation in soil-rice system.

The microbe-driven iron cycle plays an important role in speciation transformation and migration of arsenic (As) in soil-rice systems. In this study, pot experiments were used to investigate the effect of bacterial iron (Fe) reduction processes in soils on As speciation and migration, as well as on As uptake in soil-rice system. During the rice growth period, pH and electrical conductivity (EC) in soil solutions initially increased and then decreased, with the ranges of 7.4-8.8 and 116.3-820 mS cm-1, respectively. The concentrations of Fe, total As and As(III) showed an increasing trend in the rhizosphere and non-rhizosphere soil solutions with the increasing time. Fe concentrations were significantly positively correlated with total As and As(III) concentrations (***p < 0.001) in the soil solutions. The abundances of the arsenate reductase gene (arsC) and the As(III) S-adenosylmethionine methyltransferase gene (arsM) in rhizosphere soils were higher than those in non-rhizosphere soils, while the abundance of the Fe-reducing bacteria (Geo) showed an opposite trend. Moreover, it showed that the Geo abundance was significantly positively correlated with that of the arsC (***p < 0.001) and arsM (**p < 0.01) genes, respectively. The abundances of Geo, arsC and arsM genes were significantly positively correlated with the concentrations of Fe, total As and As(III) in the soil solutions (*p < 0.05). Moreover, the abundances of arsC and arsM genes were significantly negatively correlated with total As and As(III) in rice grains (*P < 0.05). These results showed that the interaction of bacterial Fe reduction process and radial oxygen loss from roots promoted the reduction and methylation of As, and then decreased As uptake by rice, which provided a theoretical basis for alleviating As pollution in paddy soils.

Temporal trends in dioxin-like polychlorinated biphenyl concentrations in serum from the general population of Shandong Province, China: A longitudinal study from 2011 to 2017.

Temporal changes in the concentrations of dioxin-like (DL) polychlorinated biphenyls (PCBs) in environmental and biological matrices in China are not well understood. We determined the DL-PCB concentrations in pooled serum samples from the general population of Weifang City, Shandong Province, China in 2011 (n = 305) and 2017 (n = 495). The total DL-PCB concentration was 3.48 ±â€¯1.31 ng/g lipid (mean ±â€¯standard deviation) in 2011 and 2.82 ±â€¯1.73 ng/g lipid (19% lower) in 2017, but the difference was not statistically significant (p = 0.347). The DL-PCB concentrations and toxic equivalent concentrations were much lower in the serum from Weifang residents than have been found in serum from the inhabitants of other parts of the world. The concentrations of most of the DL-PCB congeners followed different downward temporal trends, but the PCB-118 concentration was higher in 2017 than in 2011. The temporal changes in the PCB concentrations and compositions in the samples from the general population of Weifang indicated that there may a new source of unintentionally produced PCBs in Weifang.

Plant species diversity for vegetation restoration in manganese tailing wasteland.

Vegetation restoration is one of the most effective measures to restore degraded ecosystem in mining wasteland. A field experiment was conducted to study the effects of some site treatments' three different approaches on the benefits of selective vegetation in the manganese mine. Three different approaches included (1) exposed tailings, the control treatment (tailing site); (2) soil covering of 10-cm thickness (external-soil site), and (3) soil covering of 10-cm thickness, soil ameliorating (adding fowl dung), and seeding propagation of Cynodon dactylon (Linn.) Pers. (rehabilitation site). The results indicated that 18 herb species were taken from 8 families and 4 woody plants in three sites after 1 year. After 3 years, 29 species from 14 families were observed in 3 sites. Meanwhile, compared with tailing site, the plant species of rehabilitation site was more than tailing site, and the plant abundance of external-soil site was similar to rehabilitation site. It was worthy to be mentioned that the plant species of external-soil site and rehabilitation site had a better effect on the plant community coverage of herb layer as compared with tailing site. In summary, the plant species of rehabilitation site had the most species diversity and could be recommended as the ve-restoration modes in manganese tail wasteland.

Effects of bleomycin A5 on caspase-3, P53, bcl-2 expression and telomerase activity in vascular endothelial cells.

OBJECTIVE: The aim of this study was to investigate the molecular mechanism of bleomycin A5 in inducing the apoptosis of human umbilical vein endothelial cells (ECV304). MATERIALS AND METHODS: ECV304 cells were cultured and passaged, and then were divided into control group and three treatment groups. The later three groups were treated with 15, 75, and 150 µg/ml bleomycin A5 for 24 hours, respectively. The expressions of caspase-3, p53, and bcl-2 in ECV304 cells were detected by flow cytometry, and the activity of telomerase was determined using telomere repeat amplification protocol (TRAP)-silver staining method. RESULTS: After treatment with different concentrations of bleomycin A5, the expression of caspase-3 in ECV304 cells was increased. It was significantly decreased with the increase of bleomycin A5 concentration, but the difference between 75 µg/ml and 150 µg/ml groups was not significant. Bleomycin A5 could significantly increase the expression of p53, with concentration dependence. It had no obvious effect on bcl-2 expression. There was high expression of telomerase in control group. After treatment with different concentration of bleomycin A5, the telomerase activity was significantly decreased. CONCLUSION: Bleomycin A5 can increase caspase-3 and p53 levels and inhibit telomerase activity to induce ECV304 apoptosis.

[The clinical analysis of cat scratch diseases with enlarged masses].

OBJECTIVE: In order to raise awareness of CSD and reduce misdiagnosis, we study the manisfection and treatment of CSD with enlarged masses. METHOD: A retrospective study was carried out among the 10 identified patients with CSD on the basis of compatible clinical presentation and confirmatory pathology results for CSD. RESULT: All the 10 patient's first symptoms were masses at some part of the body, more common in the neck. The ratio was 5% at neck, 3% at armpit, 1% at upper, 1% at groin. Two patients had low heat, increased leukocyte and larger masses of more than 2 cm in diameter After surgical resection, and anti-inflammatory treatment. All the patients were cured after surgery and postoperative anti-inflammatory treatment, and there was no recurrence during the 7-year follow-up. CONCLUSION: If patients were diagnosed and treated timely, the prognosis will be good. For the cases with extremely enlarged lymphonodus, surgical operation followed by antimicrobial chemotherapy will be a effective treatment.

[Intratumor bleomycin-A5 injection under electrolaryngoscope for treatment of large laryngopharyngeal and laryngeal hemangioma].

OBJECTIVE: To study the therapeutic effect of bleomycin-A5 injection under eletrolaryngoscope for treatment of large laryngopharyngeal and laryngeal hemangioma. METHODS: Intratumor bleomycin-A5 injection under eletrolaryngoscope was performed in 18 cases of large laryngopharyngeal and laryngeal hemangioma with surface anaesthesia, for totally 7 to 14 (mean 10.2) injections in each case. RESULTS: Twelve patients were cured and 6 showed obvious improvement. Follow-up of the patients for over one year found no recurrence of the hemangioma. CONCLUSION: Bleomycin-A5 injection is a minimal invasive procedure for treatment of large laryngopharyngeal and laryngeal hemangioma, causing less pain and better preserving the laryngeal function without the necessity of tracheotomy.