Evaluation of Cone-Beam Computed Tomography Scans to Develop a Staging Method of External Carotid Artery Calcification.

Background: The objective of this study was to develop a practical staging method for reporting external carotid artery calcifications (ECACs) using cone-beam computed tomography (CBCT) imaging, specifically to standardize reporting for oral and maxillofacial radiologists. Methods: This retrospective study evaluated 489 CBCT scans for the presence of ECACs. Two calibrated evaluators assessed the scans in all three orthogonal planes, using the axial plane to develop the staging system. Calcifications were graded on a scale from 0 to 5. Results: ECACs were found in 170 out of 489 scans (34.7%). There was a statistically significant increase in ECAC distribution with age progression. The prevalence of ECACs was similar between genders. Grade 1 calcifications were most common in the 51-60 age group, Grade 2 in the 61-70 and 71-80 groups, and Grades 3 and 4 in the 81-90 group. No Grade 5 calcifications were observed in any age group. The inter-rater reliability showed an excellent correlation in the identification and grading of ECACs. Conclusions: The proposed grading system enables oral and maxillofacial radiologists to quantitatively report ECACs, facilitating timely referrals to physicians for further evaluation and early intervention, thereby potentially reducing the risk of cardiovascular events.

Prevalence of likely retro-odontoid pseudotumor in patients receiving dental CBCT examinations.

OBJECTIVES: We calculated the prevalence of unsuspected retro-odontoid pseudotumor (ROP) as detected in cone beam computed tomography (CBCT) examinations. Additionally, we examined patient age, sex, and presence and severity of cervical osteoarthritis (OA) as potential risk factors for ROP. STUDY DESIGN: We retrospectively analyzed de-identified CBCT scans of 455 patients from the Division of Oral and Maxillofacial Radiology at the University of Connecticut School of Dental Medicine. Identification of likely ROP was completed through a likelihood scoring scale (1-4) due to the lack of magnetic resonance images. Severity of cervical OA was determined using 5 osteoarthritic features. An ordinal logistic regression model was used to link potential risk factors to ROP. RESULTS: In total, 18 patients (3.9%) were classified with probable (11 patients [2.4%]) or definite (7 patients [1.5%]) likely ROP. Older age and the presence and severity of OA were significantly associated with higher ROP scores (P < .001). There was no significant association of ROP likelihood and patient sex (P = .637). An increase of 1 year of age increased the chance of a patient having a higher ROP likelihood score (P < .001). The age-adjusted chance of having a more severe ROP increased with moderate to severe OA (P ≤ .017). CONCLUSIONS: Prevalence of likely ROP increases with age and OA but is not associated with sex. Individuals with moderate or severe OA are more likely to have ROP.

Prevalence and Clinical Significance of Incidental Findings in the Maxillofacial Complex of Adolescent Orthodontic Patients: A Retrospective Cone Beam Computed Tomography Analysis.

OBJECTIVES: The aim of this study was to determine the prevalence and severity of incidental findings in the maxillofacial complex of orthodontic patients imaged with cone beam computed tomography (CBCT) and assign those findings an appropriate clinical significance. METHODOLOGY: Incidental findings (IF) were identified in 250 CBCT scans of adolescent orthodontic patients (aged 13-18 years) with a large field-of-view and categorized based on their anatomic location and placed into one of six subgroups based on anatomic region: i) sino-nasal, ii) dentoalveolar, iii) nasooropharyngeal airway, iv) temporomandibular joint, v) neck, vi) calcifications, and vi) miscellaneous findings. Additionally, findings were assigned a clinical significance score based on severity on a scale of mild, moderate and severe. Mild IF was defined as an IF that does not require any further investigation or referral. Moderate IF was defined as an IF that has the tendency to become clinically significant and should be observed periodically. IFs that warrant further investigation and/or intervention were designated as severe. RESULTS: The percentage of IFs in sino-nasal and dento-alveolar regions were 44.7% and 19.1% respectively. The percentage of IFs with mild, moderate, and severe clinical significance were 27%, 72%, and 1%, respectively. Out of the IFs involving calcifications, 80.8% were stylohyoid calcifications and <1% were cranial cavity IFs such as petroclinoid calcifications and falx cerebri calcifications. Among the sino-nasal findings, 1.2% were identified as severe. CONCLUSION: The sino-nasal region had the highest frequency of IFs. Understanding the prevalence of incidental findings and its clinical relevance is important for clinicians to allow for appropriate monitoring and timely treatment of patients.

Patient shielding during dentomaxillofacial radiography: Recommendations from the American Academy of Oral and Maxillofacial Radiology.

BACKGROUND: The American Academy of Oral and Maxillofacial Radiology established an ad hoc committee to draft evidence-based recommendations and clinical guidance for the application of patient contact shielding during dentomaxillofacial imaging. TYPES OF STUDIES REVIEWED: The committee reviewed monographs and reports from radiation protection organizations and studies that reported radiation dose to gonads, breasts, and thyroid gland from dentomaxillofacial imaging. RESULTS: Considering the absence of radiation-induced heritable effects in humans and the negligible dose to the gonads and fetus from dentomaxillofacial imaging, the committee recommends discontinuing shielding of the gonads, pelvic structures, and fetuses during all dentomaxillofacial radiographic imaging procedures. On the basis of radiation doses from contemporaneous maxillofacial imaging, the committee considered that the risks from thyroid cancer are negligible and recommends that thyroid shielding not be used during intraoral, panoramic, cephalometric, and cone-beam computed tomographic imaging. PRACTICAL IMPLICATIONS: This position statement informs and educates the reader on evolving radiation protection practices and provides simple, unequivocal guidance to dental personnel to implement these guidelines. State and local authorities should be contacted to update regulations to reflect these recommendations.

Evaluation of near-infrared Raman spectroscopy in the differentiation of cortical bone, trabecular bone, and Bio-Oss bone graft: an ex-vivo study.

OBJECTIVE: We evaluated the ability of near-infrared Raman spectroscopy (near-IR RS) to differentiate among cortical bone, trabecular bone, and Bio-Oss, a bovinebone-based graft material. STUDY DESIGN: We obtained a thinly sliced section of the mandible to collect cortical and trabecular bone samples and placed compacted Bio-Oss bone graft into a partially edentulous mandible in a dry human skull to obtain a comparable Bio-Oss sample. We performed near-IR RS of the 3 samples and evaluated the resultant Raman spectra to evaluate their differences. RESULTS: We identified 3 sets of spectroscopic markers that differentiated Bio-Oss from human bone. The first consisted of significant shifts in the location of the 960 cm-1 phosphate (PO43-) peak and a reduction in its width, suggesting that Bio-Oss is more crystalline than bone. The second was the reduced carbonate content of Bio-Oss compared to bone, as determined from the 1070 cm-1/960 cm-1 peak area ratio. The final marker was the lack of collagen-associated peaks in Bio-Oss compared to cortical and trabecular bone. CONCLUSIONS: Near-IR RS can reliably differentiate human cortical and trabecular bone from Bio-Oss via 3 sets of spectral markers associated with mineral crystallinity, carbonate content, and collagen content that differ significantly between them. Integrating this modality into dental practice may assist in implant treatment planning.

Retro-odontoid pseudotumor: a potentially serious cervical spine incidental finding on cone beam computed tomography.

Retro-odontoid pseudotumor (ROP) is a benign proliferation of soft tissues posterior to the odontoid process. It can be associated with both inflammatory and noninflammatory arthritis. Altered biomechanics and atlantoaxial instability are the major contributing factors. There are no characteristic clinical findings. In the majority of cases, ROP is detected as an incidental finding in imaging. Early diagnosis of the lesion is important because of its proximity to the spinal canal and spinal cord. Clinical signs and symptoms range from pain to paralysis depending on the presence and level of spinal cord compression. In very rare cases, the lesion might cause sudden death of the patient. We report a case of ROP detected as an incidental finding in cone beam computed tomography of a patient examined for implant treatment planning.

Incidental findings of temporomandibular joint osteoarthritis and its variability based on age and sex.

PURPOSE: This study investigated the prevalence of temporomandibular joint osteoarthritis (TMJ-OA) using the Research Diagnostic Criteria for Temporomandibular Disorders image analysis criteria, assessed the severity of incidental osteoarthritic changes affecting the TMJ, and evaluated the correlations of sex and age with the prevalence and severity of TMJ-OA. MATERIALS AND METHODS: This retrospective study assessed 145 randomly selected cone-beam computed tomography scans (261 TMJs) from the authors' institutional maxillofacial radiology archive following the application of inclusion and exclusion criteria. The criteria described by Ahmad et al. were used to determine whether each TMJ was affected by OA, and the severity of the osteoarthritic changes was scored for each joint based on the method described by Alexiou et al. The chi-square, McNemar, Bhapkar chi-square, and Stuart-Maxwell chi-square tests were applied to evaluate the significance of the relationships between variables (age and sex). RESULTS: Sixteen TMJs (6.1%) had no OA, 74 (28.6%) were indeterminate for OA, and 171 (65.5%) had OA. Flattening and sclerosis were observed in 86.6% and 12.3% of cases, respectively, while resorption was observed in 7.3% of the joints. Only 21 (8.1%) of the examined TMJs had subchondral cysts. Erosion of the articular eminence was observed in 58 (22.1%) cases, while sclerosis and resorption were found in 68 (25.9%) and 16 (6.1%) TMJs, respectively. CONCLUSION: Female patients had a higher prevalence and severity of TMJ-OA than male patients. The prevalence and severity of TMJ-OA increased with age, with peaks in the fifth and seventh decades of life.

Effect of multiple injections of botulinum toxin into painful masticatory muscles on bone density in the temporomandibular complex.

BACKGROUND: Adverse effects of masticatory muscle injections of Botulinum Toxin (Btx) have been noted in animal and, less dramatically, human studies. OBJECTIVE: Among women treated in multiple community-based private practices, to compare TMJ bone density and mandibular condylar volume between patients with myofascial TMJD receiving multiple masticatory muscle Btx treatments and similarly diagnosed women not receiving such treatment. METHODS: Cohorts consisted of women whose treatment charts indicated a diagnosis of myofascial TMJD: 35 received at least 2 Btx treatment cycles; 44 received none. Bone density at pre-specified regions of interest (ROI) was defined by grey scale values from Cone Beam CT, adjusting for a fixed density phantom included in each scan. Mean bone density and mandibular condyle volume were compared between groups. Dose-response effects were tested within the Btx-exposed group. RESULTS: The mean density of primary and secondary ROIs was similar between exposure groups, as was condylar volume. Among Btx-exposed women, increasing dose of Btx to the temporalis muscle was inversely proportional to the density of the trabecular area of the mandible body. Many Btx-exposed women received smaller doses of Btx to the masseter muscles than in most TMJD Btx clinical trials. CONCLUSION: Masticatory muscle injections of Btx failed to produce clinically significant TMJ bone-related changes. Should Btx receive regulatory approval for treatment of myofascial TMJD, a phase IV study is recommended to evaluate potential adverse effects of Btx on bone and muscle when administered at higher doses and/or for more treatment cycles.

Effective doses of dental cone beam computed tomography: effect of 360-degree versus 180-degree rotation angles.

OBJECTIVES: The aims of this study were to compare radiation absorbed dose (AD) and effective dose (ED) to tissues from cone beam computed tomography (CBCT) scans with 360-degree versus 180-degree rotations with use of different fields of view (FOV), to compare EDs calculated from measured ADs versus dose area product (DAP) values, and to compare doses to the lens of the eye (LOE) from different scan parameters. STUDY DESIGN: ADs for each protocol were measured in tissues, including the LOE, by using an anthropometric phantom. EDs were calculated on the basis of dosimetry (EDm) and DAP values (EDd). Dose differences were determined with analysis of variance (ANOVA). RESULTS: ADs and EDs were substantially lower for 180-degree rotation scans compared with 360-degree rotation scans (P < .01). Remainder tissues had the greatest effect on effective dose for most FOVs. Doses were generally lower with small FOVs compared with large FOVs. Most EDm values were lower than EDd values in large FOVs but higher in small FOVs. Differences in EDm and EDd were variable and unpredictable. LOE doses were smaller with the 180-degree scans and smaller FOVs. CONCLUSIONS: Radiation doses were generally lower with 180-degree rotation scans and smaller FOVs. These parameters should be used for CBCT acquisitions, whenever possible, and should be made available in all units.

Doses, Benefits, Safety, and Risks in Oral and Maxillofacial Diagnostic Imaging.

Diagnostic imaging is essential in dentistry. Doses range from low to very low, benefits to patients can be immense, and safe techniques are well known but widely ignored. Doses range from very low with properly executed intraoral, cephalometric, and panoramic imaging to higher than multidetector computed tomography with cone-beam computed tomography. Benefits are substantial: imaged dental disease, often obscured from direct vision by size and anatomy, can pose a mortal threat to the patient. Additionally, imaging is often central in planning complex dental procedures. Safe imaging in dental environments is straightforward; the means for minimizing dose and maximizing diagnostic efficacy have been widely and inexpensively available for decades. Such techniques reduce patient dose by some 80% over traditional techniques but are infrequently used. Digital panoramic equipment reduces doses markedly. For cone-beam computed tomography imaging, selection criteria are critical in defining appropriate fields of view and presets; several publications address this. It is treacherous to discuss risk in oral and maxillofacial radiology. There are more than 330 million dental x-ray examinations annually, the majority being intraoral examinations, with steady increases in panoramic and cone-beam computed tomography. Radiation carcinogenesis from conventional imaging is unlikely, while large field-of-view, high-resolution preset cone-beam computed tomography can be comparable in carcinogenesis risk to craniofacial multidetector computed tomography. Uncertainties in risk estimation from low doses coupled with the huge numbers of dental images taken annually and the rapid growth of cone-beam computed tomography dictate that safe oral and maxillofacial imaging is in the interests of patients, staff, and the public. As low as reasonably achievable (ALARA) practices and linear no-threshold risk modeling continue to be prudent and appropriate.

Responses to spaceflight of mouse mandibular bone and teeth.

OBJECTIVE: To determine if spaceflight and microgravity affect non-weight bearing bones and development and mineralization of teeth, reasoning that combining an organ and a cellular level approach can lead to greater insights about these effects. DESIGN: Mandibles and incisors of mice flown on the US STS-135 space shuttle mission and the Russian Bion-M1 satellite were studied using micro-computed tomography and immunohistochemistry. Ground controls were mice housed in standard vivarium cages and flight habitats. RESULTS: Incisor length was greater in the 13-day STS-135 flight mice than in either control group. Initial incisor mineralization occurred more posteriorly, and incisor, enamel and dentin volumes and enamel and dentin thicknesses were greater in the 30-day Bion-M1 flight and habitat control mice than in vivarium control mice. Mandibular bone volume (BV) was increased in STS-135 flight and habitat groups and decreased in Bion-M1 flight and habitat groups compared to vivarium controls. No significant histological alterations occurred, but changes were seen in the bone and tooth proteins dentin sialoprotein, amelogenin and the type II regulatory subunit of protein kinase A. The percentage of sclerostin positive osteocytes was greatest in flight mice, and greater in STS-135 flight and habitat control mice than in the corresponding Bion-M1 groups. TRAP staining, representing osteoclastic bone remodeling, differed between the two flights and corresponded with changes in BV. Interpretation of the findings was limited by a small number of flight mice, different sex and ages of the mice in the two missions, and different habitats and diets. CONCLUSIONS: Microgravity has measurable effects on mandibular bone physiology and incisor development and mineralization. The results also showed that the habitat had an effect either in flight or ground control samples, as demonstrated by the changes in BV and apparent slowing of incisor eruption. Therefore, developing appropriate habitats is critical for future spaceflight missions.

Analyzing Dental Implant Sites From Cone Beam Computed Tomography Scans on a Tablet Computer: A Comparative Study Between iPad and 3 Display Systems.

PURPOSE: The aim of this study was to compare a medical-grade PACS (picture archiving and communication system) monitor, a consumer-grade monitor, a laptop computer, and a tablet computer for linear measurements of height and width for specific implant sites in the posterior maxilla and mandible, along with visualization of the associated anatomical structures. MATERIAL AND METHODS: Cone beam computed tomography (CBCT) scans were evaluated. The images were reviewed using PACS-LCD monitor, consumer-grade LCD monitor using CB-Works software, a 13″ MacBook Pro, and an iPad 4 using OsiriX DICOM reader software. The operators had to identify anatomical structures in each display using a 2-point scale. User experience between PACS and iPad was also evaluated by means of a questionnaire. RESULTS: The measurements were very similar for each device. P-values were all greater than 0.05, indicating no significant difference between the monitors for each measurement. The intraoperator reliability was very high. The user experience was similar in each category with the most significant difference regarding the portability where the PACS display received the lowest score and the iPad received the highest score. CONCLUSIONS: The iPad with retina display was comparable with the medical-grade monitor, producing similar measurements and image visualization, and thus providing an inexpensive, portable, and reliable screen to analyze CBCT images in the operating room during the implant surgery.

Tissue characterization using optical coherence tomography and cone beam computed tomography: a comparative pilot study.

OBJECTIVES: To evaluate the ability of optical coherence tomography (OCT) in differentiating human oral tissues in comparison with cone beam computed tomography. STUDY DESIGN: In this study, we imaged four types of tissues ex vivo: human enamel, human cortical bone, human trabecular bone, and fatty tissue plus water and air by using OCT (Axsun Inc., Billerica, MA). We then developed a method for qualitative and quantitative analyses of the human specimens. The same types of tissues were also imaged using cone beam computed tomography, and gray-scale values were measured. RESULTS: The qualitative indices (intensity profile, contour plot, and histogram) for OCT images were able to provide information regarding surface characteristics as well as changes in tissue properties at different interfaces. The quantitative index (pixel intensity values) was also able to render information regarding the distribution and density of the pixels in different samples. A similar pattern was observed in the pixel intensity values and gray-scale values in both imaging modalities. CONCLUSIONS: Within the limitations of this ex vivo pilot study, OCT can reliably differentiate between a range of hard and soft tissues.

Evaluation of linear measurements of implant sites based on head orientation during acquisition: An ex vivo study using cone-beam computed tomography.

PURPOSE: This study evaluated the effect of various head orientations during cone-beam computed tomography (CBCT) image acquisition on linear measurements of potential implant sites. MATERIALS AND METHODS: Six dry human skulls with a total of 28 implant sites were evaluated for seven different head orientations. The scans were acquired using a Hitachi CB-MercuRay CBCT machine. The scanned volumes were reconstructed. Horizontal and vertical measurements were made and were compared to measurements made after simulating the head position to corrected head angulations. Data was analyzed using a two-way ANOVA test. RESULTS: Statistical analysis revealed a significant interaction between the mean errors in vertical measurements with a marked difference observed at the extension head position (P<0.05). Statistical analysis failed to yield any significant interaction between the mean errors in horizontal measurements at various head positions. CONCLUSION: Head orientation could significantly affect the vertical measurements in CBCT scans. The main head position influencing the measurements is extension.

Oral and maxillofacial radiologists: career trends and specialty board certification status.

Oral and maxillofacial radiology is the newest specialty to be recognized by the American Dental Association, so knowledge about the parameters of this profession is in the early stages of development. The aim of this study was to understand the current distribution of oral and maxillofacial radiologists (OMFRs) in academia and private practice, the nature of their practice, and trends in their board certification status. An email describing the study's purpose with a link to a survey was sent to "OradList," a listserv that has a majority of OMFRs in the United States and Canada as members. Of the 205 respondents, 46% were female; the age distribution ranged from 25 to over 70 years; and 80% were working full-time. Among the respondents, 66% practiced in an academic setting, 20% in private practice, 8% in both private and academic settings, and 3% in the military. Only 37% of the respondents were board-certified. For OMFRs trained from 1965 to 2009, there was an increasing trend towards becoming board-certified, but a significant decrease occurred after 2009, dropping from 65% to 35% of those trained in those years.