ABSTRACT
In advancing special materials, seamless integration into existing production chains is paramount. Beyond creating improved alloy compositions, precision in processing methods is crucial to preserve desired properties without drawbacks. The synergy between alloy formulation and processing techniques is pivotal for maximizing the benefits of innovative materials. By focusing on advanced deep processing technology for small ingots of modified 12% Cr stainless steel, this paper delves into the transformation of cast ingot steel structures using radial shear rolling (RSR) processing. Through a series of nine passes, rolling ingots from a 32 mm to a 13 mm diameter with a total elongation factor of 6.02, a notable shift occurred. This single-operation process effectuated a substantial change in sample structure, transitioning from a coarse-grained cast structure (0.5-1.5 mm) to an equiaxed fine-grained structure with peripheral grain sizes of 1-4 µm and an elongated rolling texture in the axial part of the bar. The complete transformation of the initial cast dendritic structure validates the implementation of the RSR method for the deep processing of ingots.
ABSTRACT
The rheological properties of the Zr-2.5Nb alloy by the strain rate range of 0.5-15 s-1 and by the temperature range of 20-770 °C was studied. The dilatometric method for phase states temperature ranges was experimentally determined. A material properties database for computer FEM simulation regards the indicated temperature-velocity ranges were created. Using this database and DEFORM-3D FEM-softpack, the radial shear rolling complex process numerical simulation was carried out. The contributed conditions for the ultrafine-grained state alloy structure refinement were determined. Based on the simulation results, a full-scale experiment of Zr-2.5Nb rod rolling a on a radial-shear rolling mill RSP-14/40 was carried out. It takes in seven passes from a diameter of 37-20 mm with a total diameter reduction ε = 85%. According to this case simulation data, the total equivalent strain in the most processed peripheral zone 27.5 mm/mm was reached. Due to the complex vortex metal flow, the equivalent strain over the section distribution was uneven with a gradient reducing towards the axial zone. This fact should have a deep effect on the structure change. Changes and structure gradient by sample section EBSD mapping with 2 mm resolution were studied. The microhardness section gradient by the HV 0.5 method was also studied. The axial and central zones of the sample by the TEM method were studied. The rod section structure has an expressed gradient from the formed equiaxed ultrafine-grained (UFG) structure on a few outer millimeters of the peripheral section to the elongated rolling texture in the center of the bar. The work shows the possibility of processing with the gradient structure obtaining and enhanced properties for the Zr-2.5Nb alloy, and a database for this alloy FEM numerical simulations are also presents.
ABSTRACT
The method of radial shear rolling makes it possible to achieve comparable to high pressure torsion (HPT) method ultrahigh degrees of total strain level in combination with the vortex metal flow character for long-length large bulk bars unable by HPT and many other processes of sever plastic deformation (SPD). Sequential rolling of the Zr-1%Nb alloy was carried out under extreme conditions on two radial shear rolling mills with a total diameter reduction ε = 185% and a maximum total strain level = 46 mm/mm. The strain level and its cross-section distribution assessment by finite element method (FEM) simulation was studied. The final bar cross-section structure type distribution detailed study 1 mm resolution by electron back scatter diffraction (EBSD) mapping was performed. A gradient structure with a predominance of the equiaxed ultrafine-grained (UFG) state was found. The deformation level rising did not allow to refine it in the periphery zone more than that obtained nearly middle of the processing, but it allows for significant change in the axial zone structure. The additional large warm deformations by radial shear rolling have no additional grain refinement effect for already 300-600 nm refined zone. An equiaxed UFG structure was obtained in a relatively large volume of the sample with a reduced gradient towards the non-UFG center zone in regard to known works.
