A Review of Sisal Fiber-Reinforced Geopolymers: Preparation, Microstructure, and Mechanical Properties.

The early strength of geopolymers (GPs) and their composites is higher, and the hardening speed is faster than that of ordinary cementitious materials. Due to their wide source of raw materials, low energy consumption in the production process, and lower emissions of pollutants, they are considered to have the most potential to replace ordinary Portland cement. However, similar to other inorganic materials, the GPs themselves have weak flexural and tensile strength and are sensitive to micro-cracks. Improving the toughness of GP materials can be achieved by adding an appropriate amount of fiber materials into the matrix. The use of discrete staple fibers shows great potential in improving the toughness of GPs. Sisal is a natural fiber that is reproducible and easy to obtain. Due to its good mechanical properties, low cost, and low carbon energy usage, sisal fiber (SF) is a GP composite reinforcement with potential development. In this paper, the research progress on the effect of SF on the properties of GP composites in recent decades is reviewed. It mainly includes the chemical composition and physical properties of SFs, the preparation technology of sisal-reinforced geopolymers (SFRGs), the microstructure analysis of the interface of SFs and the GP matrix, and the macroscopic mechanical properties of SFRGs. The properties of SFs make them have good bonding properties with the GP matrix. The addition of SFs can improve the flexural strength and tensile strength of GP composites, and SFRGs have good engineering application prospects.

Procalcitonin and C-reactive protein as diagnostic biomarkers in COVID-19 and Non-COVID-19 sepsis patients: a comparative study.

BACKGROUND: This study aimed to assess and compare procalcitonin (PCT) and C-reactive protein (CRP) levels between COVID-19 and non-COVID-19 sepsis patients. Additionally, we evaluated the diagnostic efficiency of PCT and CRP in distinguishing between Gram-positive (GP) and Gram-negative (GN) bacterial infections. Moreover, we explored the associations of PCT with specific pathogens in this context. METHODS: The study included 121 consecutive sepsis patients who underwent blood culture testing during the COVID-19 epidemic. PCT and CRP were measured, and reverse transcriptase-polymerase chain reaction (RT-PCR) was employed for the detection of COVID-19 nucleic acid. The Mann-Whitney U-test was used to compare PCT and CRP between the COVID-19 and non-COVID-19 groups. Receiver operating characteristic (ROC) curves were generated to compare PCT and CRP levels in the GN group versus the GP group for assessing the diagnostic efficiency. The kruskal-Wallis H test was applied to assess the impact of specific pathogen groups on PCT concentrations. RESULTS: A total of 121 sepsis patients were categorized into a COVID-19 group (n = 25) and a non-COVID-19 group (n = 96). No significant differences in age and gender were observed between the COVID-19 and non-COVID-19 groups. The comparison of biomarkers between these groups showed no statistically significant differences. The optimal cut-off values for PCT and CRP in differentiating between GP and GN infections were 1.03 ng/mL and 34.02 mg/L, respectively. The area under the ROC curve was 0.689 (95% confidence interval (CI) 0.591-0.786) for PCT and 0.611 (95% CI 0.505-0.717) for CRP. The diagnostic accuracy was 69.42% for PCT and 58.69% for CRP. The study found a significant difference in PCT levels among specific groups of pathogens (P < 0.001), with the highest levels observed in Escherichia coli infections. The frequency of Staphylococcus spp. positive results was significantly higher (36.0%) in COVID-19 compared to non-COVID-19 sepsis patients (P = 0.047). CONCLUSION: Sepsis patients with COVID-19 revealed a significantly higher culture positivity for staphylococcus spp. than the non-COVID-19 group. Both PCT and CRP showed moderate diagnostic efficiency in differentiating between GP and GN bacterial infections. PCT showed potential utility in identifying E. coli infections compared to other pathogens.

Dendritic quinary PtRhMoCoFe high-entropy alloy as a robust immunosensing nanoplatform for ultrasensitive detection of biomarker.

Recently, high-entropy alloys have superior physicochemical properties as compared to conventional alloys for their glamorous "cocktail effect". Nevertheless, they are scarcely applied to electrochemical immunoassays until now. Herein, uniform PtRhMoCoFe high-entropy alloyed nanodendrites (HEANDs) were synthesized by a wet-chemical co-reduction method, where glucose and oleylamine behaved as the co-reducing agents. Then, a series of characterizations were conducted to illustrate the synergistic effect among multiple metals and fascinating structural characteristics of PtRhMoCoFe HEANDs. The obtained high-entropy alloy was adopted to build a electrochemical label-free biosensor for ultrasensitive bioassay of biomarker cTnI. In the optimized analytical system, the resultant sensor exhibited a dynamic linear range of 0.0001-200 ng mL-1 and a low detection limit of 0.0095 pg mL-1 (S/N = 3). Eventually, this sensing platform was further explored in serum samples with satisfied recovery (102.0 %). This research renders some constructive insights for synthesis of high-entropy alloys and their expanded applications in bioassays and bio-devices.

Effects of an Omaha System-based follow-up regimen on self-care and quality of life in gastrointestinal surgery patients.

BACKGROUND: Currently, a variety of new nursing methods and routine nursing have been widely used in the nursing of gastrointestinal surgery patients. AIM: To investigate the effect of follow-up protocol based on the Omaha System on self-care ability and quality of life of gastrointestinal surgery patients. METHODS: A total of 128 patients with inflammatory bowel disease in gastrointestinal surgery in gastrointestinal surgery from March 2019 to August 2021 were divided into A (n = 64) and B (n = 64) groups according to different nursing methods. The group A received a follow-up program Omaha System-based intervention of the group B, whereas the group B received the routine nursing intervention. Medical Coping Modes Questionnaire, Crohn's and Colitis Knowledge Score (CCKNOW), inflammatory bowel disease questionnaire (IBDQ), Exercise of Self-nursing Agency Scale (ESCA), The Modified Mayo Endoscopic Score, and Beliefs about Medicine Questionnaire (BMQ) were compared between the two groups. RESULTS: Following the intervention, the group A were facing score significantly increased than group B, while the avoidance and yield scores dropped below of group B (all P < 0.05); in group A, the level of health knowledge, personal care abilities, self-perception, self-awareness score and ESCA total score were more outstanding than group B (all P < 0.05); in group A the frequency of defecation, hematochezia, endoscopic performance, the total evaluation score by physicians and the disease activity were lower than group B (all P < 0.05); in the group A, the total scores of knowledge in general, diet, drug, and complication and CCKNOW were higher than group B (all P < 0.05); in group A, the necessity of taking medicine, score of medicine concern and over-all score of BMQ were more significant than group B (all P < 0.05); at last in the group A, the scores of systemic and intestinal symptoms, social and emotional function, and IBDQ in the group A were higher than group B (all P < 0.05). CONCLUSION: For gastrointestinal surgery patients, the Omaha System-based sequel protocol can improve disease awareness and intervention compliance, help them to face the disease positively, reduce disease activity, and improve patients' self-nursing ability and quality of life.

Effect of Wet-Dry Cycling on Properties of Natural-Cellulose-Fiber-Reinforced Geopolymers: A Short Review.

To study the long-term properties of cement-based and geopolymer materials exposed to outdoor environments, wet-dry cycles are usually used to accelerate their aging. The wet-dry cycling can simulate the effects of environmental factors on the long-term properties of the composites under natural conditions. Nowadays, the long-term properties of geopolymer materials are studied increasingly deeply. Unlike cement-based materials, geopolymers have better long-term properties due to their high early strength, fast hardening rate, and wide range of raw material sources. At the same time, natural cellulose fibers (NCFs) have the characteristics of abundant raw materials, low price, low carbon, and environmental protection. The use of NCFs as reinforcements of geopolymer matrix materials meets the requirements of sustainable development. In this paper, the types and properties of NCFs commonly used for geopolymer reinforcement and the polymerization mechanism of geopolymer matrix materials are summarized. By analyzing the properties of natural-cellulose-fiber-reinforced geopolymers (NCFRGs) under non-wet-dry cycles and NCFRGs under wet-dry cycles, the factors affecting the long-term properties of NCFRGs under wet-dry cycles are identified. Meanwhile, the degradation mechanism and mechanical properties of NCFRG composites after wet-dry cycles are analyzed. In addition, the relationship between the properties of composites and the change of microstructure of fiber degradation is further analyzed according to the results of microscopic analysis. Finally, the effects of wet-dry cycles on the properties of fibers and geopolymers are obtained.

Effect of Plant Fiber on Early Properties of Geopolymer.

Geopolymer (GP) is environmentally friendly, has good mechanical properties and long-term workability, and has broad application prospects. However, due to the poor tensile strength and toughness of GPs, they are sensitive to microcracks, which limits their application in engineering. Fiber can be added to GPs to limit the growth of cracks and enhance the toughness of the GP. Plant fiber (PF) is cheap, easy to obtain, and abundant in source, which can be added to GP to improve the properties of composites. This paper reviews recent studies on the early properties of plant fiber-reinforced geopolymers (PFRGs). In this manuscript, the properties of PFs commonly used for GP reinforcements are summarized. The early properties of PFRGs were reviewed, including the rheological properties of fresh GPs, the early strength of PFRGs, and the early shrinkage and deformation properties of PFRGs. At the same time, the action mechanism and influencing factors of PFRGs are also introduced. Based on the comprehensive analysis of the early properties of PFRGs, the adverse effects of PFs on the early properties of GPs and the solutions were summarized.

Mammary Paget's Disease of Young Females: Case Reports and Comparison With Middle-Aged and Elderly Patients.

Purpose: Mammary Paget's disease (PD) in young women has seldom been reported. The aim of this study was to improve the knowledge of the clinicopathological characteristics in young patients with PD to provide a basis for the precise treatment of young patients. Methods: The medical records and pathological slides of 8 young patients (younger than 40 years old) with PD were reviewed. The data of 20 patients over 40 years old within the same period were used as controls. Results: The average age was 32.00 ± 3.96 years for the young patient group, with the youngest aged 27 years. The first symptom, physical examination, Paget cell morphology, and immunohistochemical marks were the same in different age groups. But young patients have varied tumor distribution patterns, fewer interstitial inflammatory cells, and advanced pathological local lymphatic metastasis than older patients in the same period. Conclusions: PD in young women has unique histopathological features. These manifestations seem to provide personalized treatment for PD treatment in young patients. More research is needed to clarify the significance of this research.

m6A demethylase ALKBH5 attenuates doxorubicin-induced cardiotoxicity via posttranscriptional stabilization of Rasal3.

The clinical application of anthracyclines such as doxorubicin (DOX) is limited due to their cardiotoxicity. N6-methyladenosine (m6A) plays an essential role in numerous biological processes. However, the roles of m6A and m6A demethylase ALKBH5 in DOX-induced cardiotoxicity (DIC) remain unclear. In this research, DIC models were constructed using Alkbh5-knockout (KO), Alkbh5-knockin (KI), and Alkbh5-myocardial-specific knockout (ALKBH5flox/flox, αMyHC-Cre) mice. Cardiac function and DOX-mediated signal transduction were investigated. As a result, both Alkbh5 whole-body KO and myocardial-specific KO mice had increased mortality, decreased cardiac function, and aggravated DIC injury with severe myocardial mitochondrial damage. Conversely, ALKBH5 overexpression alleviated DOX-mediated mitochondrial injury, increased survival, and improved myocardial function. Mechanistically, ALKBH5 regulated the expression of Rasal3 in an m6A-dependent manner through posttranscriptional mRNA regulation and reduced Rasal3 mRNA stability, thus activating RAS3, inhibiting apoptosis through the RAS/RAF/ERK signaling pathway, and alleviating DIC injury. These findings indicate the potential therapeutic effect of ALKBH5 on DIC.

Comparative transcriptome analysis of grafting to improve chilling tolerance of cucumber.

Grafting with pumpkin as rootstock could improve chilling tolerance of cucumber; however, the underlying mechanism of grafting-induced chilling tolerance remains unclear. Here, we analyzed the difference of physiological and transcriptional level between own-rooted (Cs/Cs) and hetero-grafted (Cs/Cm) cucumber seedlings under chilling stress. The results showed that grafting with pumpkin significantly alleviated the chilling injury as evidenced by slightly symptoms, lower contents of electrolyte leakage (EL), malondialdehyde (MDA), hydrogen peroxide (H2O2), and superoxide anion (O2-) and higher relative water content in Cs/Cm seedlings compared with Cs/Cs seedlings under chilling stress. RNA-seq data showed that grafting induced more DGEs at 8 °C/5 °C compared with 25 °C/18 °C. In accordance with the increase of the activities of antioxidant enzymes (SOD, POD, CAT, APX), grafting upregulated the expression of the regulated redox-related genes such as GST, SOD, and APX. Moreover, grafting increased the expression of genes participated in central carbon metabolism to promote the conversion and decomposition of sugar, which provided more energy for the growth of Cs/Cm seedlings under chilling stress. In addition, grafting regulated the genes involved in the intracellular signal transduction pathways such as calcium signal (CAML, CML, and CDPK) and inositol phospholipid signal (PLC), as well as changed the gene expression of plant hormone signal transduction pathways (ARF, GAI, ABF, and PYR/PYL). These results provide a physiological and transcriptional basis for the molecular mechanism of grafting-induced chilling tolerance of cucumber seedlings.

Alkaline Degradation of Plant Fiber Reinforcements in Geopolymer: A Review.

Plant fibers (PFs), such as hemp, Coir, and straw, are abundant in resources, low in price, light weight, biodegradable, have good adhesion to the matrix, and have a broad prospect as reinforcements. However, the degradation of PFs in the alkaline matrix is one of the main factors that affects the durability of these composites. PFs have good compatibility with cement and the geopolymer matrix. They can induce gel growth of cement-based materials and have a good toughening effect. The water absorption of the hollow structure of the PF can accelerate the degradation of the fiber on the one hand and serve as the inner curing fiber for the continuous hydration of the base material on the other. PF is easily deteriorated in the alkaline matrix, which has a negative effect on composites. The classification and properties of PFs, the bonding mechanism of the interface between PF reinforcements and the matrix, the water absorption of PF, and its compatibility with the matrix were summarized. The degradation of PFs in the alkaline matrix and solution, drying and wetting cycle conditions, and high-temperature conditions were reviewed. Finally, some paths to improve the alkaline degradation of PF reinforcement in the alkaline matrix were proposed.

Development and comparison of 68Ga/18F/64Cu-labeled nanobody tracers probing Claudin18.2.

Claudin 18.2 (CLDN18.2) is an emerging target for the treatment of gastric cancers. We aim to develop tracers to image the expression of CLDN18.2. A humanized nanobody targeting CLDN18.2 (clone hu19V3) was produced and labeled with 68Ga, 64Cu, and 18F. The tracers were investigated in subcutaneous and metastatic models established using two different mouse types (nude and Balb/c mice) and two different cell lines (CHO-CLDN18.2 and CT26-CLDN18.2). Gastric cancer patient-derived xenograft (PDX) models were further established for validation experiments. Three novel CLDN18.2-targeted tracers (i.e., [68Ga]Ga-NOTA-hu19V3, [64Cu]Cu-NOTA-hu19V3, and [18F]F-hu19V3) were developed with good radiochemical yields and excellent radiochemical purities. [68Ga]Ga-NOTA-hu19V3 immuno-positron emission tomography (immunoPET) rapidly delineated subcutaneous CHO-CLDN18.2 lesions and CT26-CLDN18.2 tumors, as well as showing excellent diagnostic value in PDX models naturally expressing CLDN18.2. While [68Ga]Ga-NOTA-hu19V3 had high kidney accumulation, [64Cu]Cu-NOTA-hu19V3 showed reduced kidney accumulation and improved image contrast at late time points. Moreover, [18F]F-hu19V3 was developed via click chemistry reaction under mild conditions and precisely disseminated CHO-CLDN18.2 lesions in the lungs. Furthermore, region of interest analysis, biodistribution study, and histopathological staining results correlated well with the in vivo imaging results. Taken together, immunoPET imaging with the three tracers can reliably visualize CLDN18.2 expression.

Properties of 3D Printing Fiber-Reinforced Geopolymers Based on Interlayer Bonding and Anisotropy.

The engineering applications and related researches of 3D printing fiber-reinforced geopolymers are becoming more and more extensive. However, compared with traditional mould-casted cement-based materials, the properties of 3D-printed fiber-reinforced geopolymers are significantly different, and their interlayer bonding and anisotropy effects are less studied, so in-depth analysis and summary are needed. Similar to common cement-based materials, the reinforcement fibers for geopolymers include not only traditional fibers, such as steel fibers and carbon fibers, but also synthetic polymer fibers and natural polymer fibers. These fibers have unique properties, most of which have good mechanical properties and bonding properties with geopolymers, as well as excellent crack resistance and enhancement. This paper summarizes and analyzes the effects of traditional fibers, polymer fibers, plant fibers and other reinforcement fibers on the properties of 3D-printed fiber-reinforced geopolymers, especially on the interlayer bonding and anisotropy. The influence of the flow and thixotropic properties of fiber-reinforced fresh geopolymer on the weak bond and anisotropy between layers is summarized and analyzed. At the same time, the influence of fibers on the compressive strength, flexural strength and interlayer binding strength of the hardened geopolymers is investigated. The effect of fibers on the anisotropy of 3D-printed geopolymers and the methods to improve the interlayer binding degree are summarized. The limitations of 3D printing fiber-reinforced geopolymers are pointed out and some suggestions for improvement are put forward. Finally, the research on 3D printing fiber-reinforced geopolymers is summarized. This paper provides a reference for further improving the interlayer bonding strength of 3D-printed fiber-reinforced geopolymers. At the same time, the anisotropy properties of 3D-printed fiber-reinforced geopolymers are used to provide a basis for engineering applications.

The Mechanical Properties of Plant Fiber-Reinforced Geopolymers: A Review.

Both geopolymer and plant fiber (PF) meet the requirements of sustainable development. Geopolymers have the advantages of simple preparation process, conservation and environmental protection, high early strength, wide source of raw materials, and low cost. They have broad application prospects and are considered as the most potential cementitious materials to replace cement. However, due to the ceramic-like shape and brittleness of geopolymers, their flexural strength and tensile strength are poor, and they are sensitive to microcracks. In order to solve the brittleness problem of geopolymers, the toughness of composites can be improved by adding fibers. Adding fibers to geopolymers can limit the growth of cracks and enhance the ductility, toughness and tensile strength of geopolymers. PF is a good natural polymer material, with the advantages of low density, high aspect ratio. It is not only cheap, easy to obtain, abundant sources, but also can be repeatedly processed and biodegradable. PF has high strength and low hardness, which can improve the toughness of composites. Nowadays, the research and engineering application of plant fiber-reinforced geopolymers (PFRGs) are more and more extensive. In this paper, the recent studies on mechanical properties of PFRGs were reviewed. The characteristics of plant fibers and the composition, structure and properties of geopolymers were reviewed. The compatibility of geopolymer material and plant fiber and the degradation of fiber in the substrate were analyzed. From the perspective of the effect of plant fibers on the compression, tensile and bending properties of geopolymer, the reinforcing mechanism of plant fibers on geopolymer was analyzed. Meanwhile, the effect of PF pretreatment on the mechanical properties of the PFRGs was analyzed. Through the comprehensive analysis of PFFRGs, the limitations and recommendations of PFFRG are put forward.

Ultrasensitive sandwich-typed electrochemical immunoassay for detection of squamous cell carcinoma antigen based on highly branched PtCo nanocrystals and dendritic mesoporous SiO2@AuPt nanoparticles.

Squamous cell carcinoma antigen (SCCA) is one of the common squamous cell carcinomas (SCC) in women, which usually works as a tumor biomarker for cervical cancer in diagnostic applications. Herein, bimetallic PtCo highly branched nanocrystals (PtCo BNCs) acted as electrode substrates to construct sandwich-typed electrochemical immunosensor for ultrasensitive detection of SCCA, by using dendritic mesoporous SiO2@AuPt nanoparticles (DM-SiO2@AuPt NPs) to adsorb electroactive thionine (Thi) as a signal label. The PtCo BNCs enlarged the loading of the primary antibody (Ab1), showing effective improvement in conductivity and sensitivity. The DM-SiO2 had abundant pores to incorporate more Thi, on which the decorated AuPt NPs created a great number of active sites to immobilize the secondary antibodies (Ab2), thereby obviously amplifying the detection signals. The prepared sensor exhibited a broader linear range (0.001-120 ng mL-1) and a lower detection limit (0.33 pg mL-1, S/N = 3), combined with high reproducibility, a low relative standard deviation (below 2.5%) and acceptable recovery (from 98.5 to 110.0%) even in diluted human serum samples. This research provides a substantial platform for clinical diagnosis of SCCA in practice.

Seasonal migratory activity of SPODOPTERA FRUGIPERDA (J.E. Smith) (Lepidoptera: Noctuidae) across China and Myanmar.

BACKGROUND: The fall armyworm (FAW) Spodoptera frugiperda Smith (Lepidoptera: Noctuidae) invaded Myanmar and China in 2018 and greatly impacted agricultural production and ecosystem balance in these areas. FAW is a migratory insect, but its seasonal migration pattern between the two countries has been largely unknown. From 2019 to 2021, we monitored the seasonal migration of FAW in the China-Myanmar border area using a searchlight trap, assessed the reproductive development status of female migrants and traced the migratory routes by trajectory simulation. RESULTS: FAW moths were trapped by the searchlight trap in Lancang County (Yunnan, China) all year, with obvious seasonal differences in the number caught. There were small-scale persistent trapping peaks in spring and summer, and obvious peaks in autumn; only a small number of moths were trapped in winter. Examination of the ovaries of female moths collected in different seasons showed that most females had matured, indicating that the moths were migrating and did not take off from the local area. In the migration trajectory simulation, FAW mainly migrated from Myanmar to Southwest China in spring and summer and back to Myanmar in autumn. CONCLUSION: Our findings indicate that FAW migrates between China and Myanmar according to the monsoon circulation, which will help guide cross-border regional monitoring and management strategies against this pest. © 2022 Society of Chemical Industry.

Properties of Fiber-Reinforced One-Part Geopolymers: A Review.

Geopolymers have the advantages of low carbon, being environmentally friendly and low price, which matches the development direction of building materials. Common geopolymer materials are also known as two-part geopolymers (TPGs). TPGs are usually prepared from two main substances, which are formed by polymerization of a silicoaluminate precursor and an alkaline activator solution. The TPG has many limitations in engineering application because of its preparation on the construction site, and the use of solid alkaline activator in one-part geopolymers (OPGs) overcomes this shortcoming. However, the brittleness of OPGs such as ceramics also hinders its popularization and application. The properties of the new OPG can be improved effectively by toughening and strengthening it with fibers. This review discusses the current studies of fiber-reinforced one-part geopolymers (FOPGs) in terms of raw precursors, activators, fibers, physical properties and curing mechanisms. In this paper, the effects of the commonly used reinforcement fibers, including polyvinyl alcohol (PVA) fiber, polypropylene (PP) fiber, polyethylene (PE) fiber, basalt fiber and other composite fibers, on the fresh-mixing properties and mechanical properties of the OPGs are summarized. The performance and toughening mechanism of FOPGs are summarized, and the workability, macroscopic mechanical properties and durability of FOPGs are investigated. Finally, the development and engineering application prospect of FOPGs are prospected.

Radiosynthesis and First Preclinical Evaluation of the Novel 11C-Labeled FAP Inhibitor 11C-FAPI: A Comparative Study of 11C-FAPIs and (68Ga) Ga-DOTA-FAPI-04 in a High-FAP-Expression Mouse Model.

PURPOSE: 68Ga-labeled fibroblast activation protein inhibitors, such as [68Ga]Ga-DOTA-FAPI-04 and [68Ga]Ga-DOTA-FAPI-46, have been successfully applied in positron emission tomography imaging of various tumor types. To broaden the PET tracers of different positron nuclides for imaging studies of FAP-dependent diseases, we herein report the radiosynthesis and preclinical evaluation of two 11C-labeled FAP inhibitors, 11C-RJ1101 and 11C-RJ1102. METHODS: Two phenolic hydroxyl precursors based on a quinoline amide core coupled with a 2-cyanopyrrolidine moiety were coupled with [11C]CH3I to synthesize 11C-RJ1101 and 11C-RJ1102. In vivo small-animal PET and biological distribution studies of 11C-RJ1101 and 11C-RJ1102 compared to [68Ga]Ga-DOTA-FAPI-04 were conducted in nude mice bearing U87MG tumor xenografts at 30, 60, and 90min, respectively. RESULTS: 11C-RJ1101 and 11C-RJ1102 were synthesized in over 15% radiochemical yields, with specific activities of 67 GBq/µmol and 34 GBq/µmol, respectively, at the end of synthesis and radiochemical purities greater than 99%. In U87MG tumor xenograft PET studies, the three tracers experienced higher specific uptake at the tumor site. However, because of significant differences in metabolism and clearance, [68Ga]Ga-DOTA-FAPI-04 experienced high uptake in the kidney, whereas 11C-RJ1101 and 11C-RJ1102 showed high uptake in the liver and intestine. Biodistribution studies revealed significant hepatobiliary excretion of 11C-RJ1101 and 11C-RJ1102. 11C-RJ1102 showed higher specific tumor uptake in U87MG xenografts (1.71 ± 0.08% injected dose per Gram of tissue [ID/g]) than 11C-RJ1101 (1.34 ± 0.10%ID/g) and [68Ga]Ga-DOTA-FAPI-04 (1.29 ± 0.04%ID/g) after 30 min p. i. In orthotopic glioma models, the uptake values were 0.07 ± 0.03% ([68Ga]Ga-DOTA-FAPI-04) and 0.16 ± 0.03% (11C-RJ1102), respectively. CONCLUSION: 11C-RJ1101 and 11C-RJ1102 are interesting candidates for translation to the clinic, taking advantage of the shorter half-life and physical imaging properties of C-11.

Efficacy and safety of Zicuiyin decoction on diabetic kidney disease: A multicenter, randomized controlled trial.

BACKGROUD: Zicuiyin (ZCY) decoction created by Xichun Zhang in the Qing dynasty has been used on diabetes mellitus and complications for more than two centuries in China. Huangkui capsule (HKC) is a listed Chinese patent medicine to treat diabetic kidney disease (DKD). To determine whether ZCY is non-inferior to HKC in the treatment of DKD, a multicenter, parallel-control, open-label, randomized clinical trial was conducted. METHODS: In this clinical trial, 88 DKD patients were recruited at three centers in Tianjin from January 2018 to December 2019. They were randomized to receive HKC (2.5 g, TID) or ZCY (crude drug amount 75 g, 150 ml, BID) for eight weeks based on routine treatment. The primary outcome was the change of estimated glomerular filtration rate (eGFR). The secondary outcomes included change of serum creatinine (SCr), urinary albumin excretion rate, 24 h urinary protein, urinary albumin-creatinine ratio, glycosylated hemoglobin A1c, symptom scores, and microbiota compositions profiles. RESULTS: The change of eGFR in HKC and ZCY groups were -7.08 ± 24.65 and 2.57 ± 18.49 ml/min/1.73 m2, respectively (p < 0.05). The 95% lower confidence limit for the difference between the estimated means was 1.93 ml/min/1.73 m2, establishing the superiority of ZCY. Compared to HKC, ZCY could significantly decrease SCr and symptom scores (p < 0.05). There were no significant differences in other outcomes between the two groups (p > 0.05). ZCY ameliorated gut microbiota dysbiosis, including increased Prevotellaceae and Lactobacillaceae and decreased Enterobacteriales, Clostridiaceae and Micrococcaceae. No severe adverse events were reported in any group. CONCLUSIONS: ZCY had better efficacy in improving and protecting kidney function. It would be an alternative option to treat DKD, especially those who decline eGFR and gut microbiota dysbiosis. TRIAL REGISTRATION: Chinese Clinical Trial Registry: ChiCTR-OON-17012076. Registered July 21, 2017.

Properties of 3D-Printed Polymer Fiber-Reinforced Mortars: A Review.

The engineering applications and related research of fiber-reinforced cement and geopolymer mortar composites are becoming more and more extensive. These reinforced fibers include not only traditional steel fibers and carbon fibers, but also synthetic polymer fibers and natural polymer fibers. Polymer fiber has good mechanical properties, good bonding performance with cement and geopolymer mortars, and excellent performance of cracking resistance and reinforcement. In this paper, representative organic synthetic polymer fibers, such as polypropylene, polyethylene and polyvinyl alcohol, are selected to explore their effects on the flow properties, thixotropic properties and printing time interval of fresh 3D-printed cement and geopolymer mortars. At the same time, the influence of mechanical properties, such as the compressive strength, flexural strength and interlaminar bonding strength of 3D-printed cement and geopolymer mortars after hardening, is also analyzed. Finally, the effect of polymer fiber on the anisotropy of 3D-printed mortars is summarized briefly. The existing problems of 3D-printed cement and polymer mortars are summarized, and the development trend of polymer fiber reinforced 3D-printed mortars is prospected.

Durability of Cellulosic-Fiber-Reinforced Geopolymers: A Review.

Geopolymers have high early strength, fast hardening speed and wide sources of raw materials, and have good durability properties such as high temperature resistance and corrosion resistance. On the other hand, there are abundant sources of plant or cellulose fibers, and it has the advantages of having a low cost, a light weight, strong adhesion and biodegradability. In this context, the geopolymer sector is considering cellulose fibers as a sustainable reinforcement for developing composites. Cellulosic-fiber-reinforced geopolymer composites have broad development prospects. This paper presents a review of the literature research on the durability of cellulosic-fiber-reinforced geopolymer composites in recent years. In this paper, the typical properties of cellulose fibers are summarized, and the polymerization mechanism of geopolymers is briefly discussed. The factors influencing the durability of cellulosic-fiber-reinforced geopolymer composites were summarized and analyzed, including the degradation of fibers in a geopolymer matrix, the toughness of fiber against matrix cracking, the acid resistance, and resistance to chloride ion penetration, high temperature resistance, etc. Finally, the influence of nanomaterials on the properties of geopolymer composites and the chemical modification of fibers are analyzed, and the research on cellulosic-fiber-reinforced geopolymer composites is summarized.