The Evaluation of the Phytochemical Profiles and Antioxidant and α-Glucosidase Inhibitory Activities of Four Herbal Teas Originating from China: A Comparative Analysis of Aqueous and Ethanol Infusions.

Recent research has demonstrated the positive impact of herbal tea consumption on postprandial blood glucose regulation. This study conducts a comparative analysis of aqueous and ethanol extractions on four herbal teas (Mallotus, Cyclocarya, Rubus, and Vine) to assess their phytochemical profiles and functional attributes. Phytochemical contents, antioxidant activities, α-glucosidase inhibitory activities, and chemical compositions are investigated via colorimetric analyses and UPLC-Q-Orbitrap HRMS/MS, respectively. Results indicate that Vine, among the teas studied, exhibits the most pronounced glucose-regulating effects under both extraction methods. While ethanol extractions yield higher phytochemical content overall, the compositions vary. Conversely, aqueous extracts demonstrate unexpectedly potent antioxidant activities and comparable α-glucosidase inhibitory activities to ethanol extracts. Phytochemical contents correlate positively with antioxidant activities and α-glucosidase inhibitory activities. However, antioxidant activities exhibit a weak positive correlation with α-glucosidase inhibitory activities. These findings provide evidence that aqueous extracts from herbal teas contain valuable phytochemical compositions beneficial for antioxidants and individuals with hyperglycemia, suggesting their potential as functional ingredients to enhance the nutritional value of herbal food products.

Fabrication of food-grade Pickering high internal phase emulsions (HIPEs) stabilized by a dihydromyricetin and lysozyme mixture.

This study evaluated the feasibility of fabricating food-grade HIPEs using a dihydromyricetin and lysozyme mixture. The effects of the oil phase volume fraction (φ), composition (lysozyme:dihydromyricetin, k), and addition amount (w) of the mixture on the formation and properties of the HIPEs were analyzed. Then, the interactions of dihydromyricetin and lysozyme were investigated. The results indicated that when w was 0.4%, HIPEs with φ value of 90% could be obtained. Furthermore, the k also affected the microstructure, mechanical properties, oil oxidation, and lutein protection ability of the HIPEs. However, the presence of dihydromyricetin did not affect lysozyme activity. Both isothermal titration calorimetry and molecular simulations proved that they did not form a typical host-guest complex. But, dihydromyricetin could absorb on the lysozyme surface. Therefore, we speculated that lysozyme and dihydromyricetin particles could overlap and form a 3D network structure to stabilize the HIPEs, which was consistent with the microstructure observations.

Inorganic nitrogen deposition in arid land ecosystems of Central Asia.

Atmospheric reactive nitrogen (Nr) pollution leads to enhanced Nr deposition. There still big gaps in understanding atmospheric nitrogen deposition because of limited monitoring sites in arid land ecosystems of Central Asia. To determine Nr concentrations and deposition in the study area, we have set up 20 monitoring sites to collect gaseous, particulate, and precipitation samples and measure their Nr components since 2009. Nr concentrations in air showed large spatial variations. Based on the Nr concentrations, dry deposition was calculated using the monthly average Nr concentrations by the corresponding deposition velocities modeled, which was varied between 3.15 and 27.92 kg N ha-1 yr-1 across desert, grassland, desert-grassland, forest, farmland, and city/suburb ecosystems. Ammonia N deposition varied between 0.50 asnd 8.66 kg N ha-1 yr-1, and nitrate N deposition c varied between 0.67 and 4.22 kg N ha-1 yr-1, respectively, in precipitation. Annual N deposition is following the order of desert (4.0) < grassland (6.0) < desert-grassland (7.6) < forest (16.1) < farmland (18.4) < city/suburb (35.4) ecosystems. Dry deposition contributed 52.7, 53.8, 100, 68.2, 73.7, and 78.9% of total N deposition in grassland, desert-grassland, desert, forest, farmland and city/suburb ecosystems, respectively. Reduced nitrogen deposition accounted for 62% of total N deposition in the arid area. Dry NH3 deposition made an important contribution (on average 40%) to total N deposition. Therefore, understanding the characteristics of Nr pollution especially NH3 emission is indispensable to atmospheric pollution control in arid region.

Soil microbial community shifts with long-term of different straw return in wheat-corn rotation system.

Despite the integral role of the soil microbial community in straw decomposition, we still have a limited understanding of the complex response of microbial community to long-term of crop straw return in rotation system. Here we report on the structural and functional response of the soil bacterial and fungal community to more than 10 years of straw return in wheat-corn rotation system. Compared with single-season straw return, soil microbial phosphor lipid fatty acids (PLFAs) and catabolic activity were improved more greatly with double-season straw return. The relative abundance of bacteria and fungi decreased with double-season straw return, but increased with single-season straw return. The copiotrophic bacteria were more represented in the soils with corn straw return, while oligotrophic groups were more represented in soils with wheat straw return. Compared with wheat straw return, lower fungal community diversity and higher abundance of fungal pathogen (identified to be Leptosphaeria) were observed with corn straw return, especially at high return rates. Redundancy analysis showed that soil available potassium (P = 0.008) and ratio of C to N (P = 0.048) significantly affected the soil bacterial community, while soil electric conductivity (P = 0.04) was the significant factor impacting soil fungal community. It suggests that full corn straw return might have positive impact on soil mineral nutrient but negative impact on soil fungal community diversity and pathogenic risk, mainly due to the change in soil electric conductivity.

Optimized anti-biofouling performance of bactericides/cellulose nanocrystals composites modified PVDF ultrafiltration membrane for micro-polluted source water purification.

The covalently functionalized cellulose nanocrystal (CNC) composites were synthesized by bonding common bactericides, such as dodecyl dimethyl benzyl ammonium chloride (DDBAC), ZnO and graphene oxide (GO) nanosheets, onto the CNC's surface. Then, the DDBAC/CNC, ZnO/CNC and GO/CNC nanocomposites modified polyvinylidene fluoride (PVDF) ultrafiltration membranes were fabricated by a simple one-step non-solvent induced phase separation (NIPS) process. The resultant hybrid membranes possessed porous and rough surfaces with more finger-like macropores that even extended through the entire cross-section. The hydrophilicity, permeability, antibacterial and antifouling performance and mechanism of the hybrid ultrafiltration membranes were evaluated and compared in detail, aiming at screening a superior hybrid membrane for practical application in micro-polluted source water purification. Among these newly-developed hybrid membranes, GO/CNC/PVDF exhibited an enhanced perm-selectivity with a water flux of 230 L/(m2 h bar) and humic acid rejection of 92%, the improved antibacterial activity (bacteriostasis rate of 93%) and antifouling performance (flux recovery rate (FRR) of >90%) being due to the optimized pore structure, higher surface roughness, incremental hydrophilicity and electronegativity. A lower biofouling level after three weeks' filtration of the actual micro-polluted source water further demonstrated that embedding the hydrophilic and antibacterial GO/CNC nanocomposite into the polymer matrix is an effective strategy to improve membrane anti-biofouling ability.

Exploration of permeability and antifouling performance on modified cellulose acetate ultrafiltration membrane with cellulose nanocrystals.

Cellulose nanocrystals (CNCs) were introduced into cellulose diacetate (CDA) matrix via immerged phase-inversion process, aiming to improve the filtration and antifouling performance of CNCs/CDA blending membrane. The effects of CNCs on membrane morphologies, hydrophilicity, permeability and antifouling property were investigated. Results showed that the incorporation of CNCs into CDA membrane could effectively enhance the permeability and antifouling property of CNCs/CDA blending membrane by optimizing membrane microstructure and improving membrane hydrophilicity. A high pure water flux of 173.8L/m2h was achieved for the CNCs/CDA blending membrane at 200KPa, which is 24 times that of the CDA membrane (7.2L/m2h). The bovine serum albumin (BSA) adsorption amount of the CNCs/CDA blending membrane decreased about 48% compared to that of the CDA membrane. Additionally, the CNCs/CDA blending membrane exhibited better antifouling performance with the flux recovery ratio (FRR) of 89.5% after three fouling cycles, compared to 59.7% for the CDA membrane.

Highly antifouling and antibacterial performance of poly (vinylidene fluoride) ultrafiltration membranes blending with copper oxide and graphene oxide nanofillers for effective wastewater treatment.

Innovation and effective wastewater treatment technology is still in great demand given the emerging contaminants frequently spotted from the aqueous environment. By blending with poly (vinylidene fluoride) (PVDF), the strong hydrophilic graphene oxide (GO) and antibacterial copper oxide (CuxO) were used as nanofillers to develop the novel, highly antifouling composite membranes via phase inversion process in our latest work. The existence and dispersion of GO and CuxO posed a significant role on morphologies, structures, surface composition and hydrophilicity of the developed composite membranes, confirmed by SEM, TEM, FTIR and XPS in depth characterization. The SEM images showed that the modified membranes presented a lower resistant structure with developed finger-like macrovoids and thin-walled even interconnected sponge-like pores after adding nanofillers, much encouraging membrane permeation. The XPS results revealed that CuxO contained Cu2O and CuO in the developed membrane and the Cu2O nanoparticles were dominant accounting for about 79.3%; thus the modified membrane specifically exhibited an efficient antibacterial capacity. Due to the hydrophilic and bactericidal membrane surface, the composite membranes demonstrated an excellent antifouling performance, including higher flux recovery rate, more resistant against accumulated contaminants and lower filtration resistance, especially lower irreversible resistance. The antifouling property, especially anti-irreversible fouling, was significantly improved, showing a significant engineering potential.

Highly Arid Oasis Yield, Soil Mineral N Accumulation and N Balance in a Wheat-Cotton Rotation with Drip Irrigation and Mulching Film Management.

Few systematic studies have been carried out on integrated N balance in extremely arid oasis agricultural areas. A two-year field experiment was conducted to evaluate the N input and output balances under long-term fertilization conditions. Five treatments were chosen, namely CK (no fertilizer), NPK, NPKS (10% straw return N and 90% chemical N), NPKM (one third urea-N, two thirds sheep manure) and NPKM+ (1.5 times NPKM). The results show an abundance of dry and wet N deposition (33 kg N ha-1 yr-1) in this area. All treatments (excluding CK) showed no significant difference in wheat production (P>0.05). NPKM gave higher cotton yields (P<0.05). In both crops, NPKM and NPKS treatments had a relatively higher N harvest index (NHI). 15N-labeled results reveal that the fertilizer N in all N treatments leached to<1 m depth and a high proportion of fertilizer-N remained in the top 60 cm of the soil profile. The NPKM+ treatment had the highest residual soil mineral N (Nmin, 558 kg Nd ha-1), and NPKM and NPKS treatments had relatively low soil Nmin values (275 and 293 kg N ha-1, respectively). Most of the treatments exhibited very high apparent N losses, especially the NPKM+ treatment (369kg N ha-1). Our arid research area had a strikingly high N loss compared to less arid agricultural areas. Nitrogen inputs therefore need careful reconsideration, especially the initial soil Nmin, fertilizer N inputs, dry and wet deposition, and appropriate organic and straw inputs which are all factors that must be taken into account under very arid conditions.

Synthesis and biological evaluation of substituted 1,2,3-benzotriazines and pyrido[3,2-d]-1,2,3-triazines as inhibitors of vascular endothelial growth factor receptor-2.

A novel series of substituted 1,2,3-benzotriazines and pyrido[3,2-d]-1,2,3-triazines were synthesized. The abilities of these compounds to inhibit the VEGFR-2 kinase activity and the proliferation of human microvascular endothelial cells (MVECs) were determined. 6-Methoxy-4-substituted-1,2,3-benzotriazines and 4-substituted-6-chloro-pyrido[3,2-d]-1,2,3-triazines have the abilities of inhibiting the VEGFR-2 kinase activity, but only the 4-substituted-6-chloro-pyrido[3,2-d]-1,2,3-triazines exhibit good growth inhibitory effects on MVECs. Compound 6-chloro-4-(3-trifluoromethylanilino)-pyrido[3,2-d][1,2,3]triazin (11d) is less half active than PTK787 to inhibit the VEGFR-2 kinase activity, but is more active than PTK787 to inhibit the growth of MVECs. The potential binding modes of 6d, 11d, and CTZ12 in complex with their putative intracellular target, VEGFR-2, were predicted using Surflex-Dock.

Design, synthesis, and antitumor activities of some novel substituted 1,2,3-benzotriazines.

A series of novel substituted 1,2,3-benzotriazines based on the structures of vatalanib succinate (PTK787) and vandetanib (ZD6474) were designed and synthesized. The antiproliferative effects of these compounds were tested on microvascular endothelial cells (MVECs) using the MTT assay. Introduction of a methoxy and a 3-chloropropoxy group into the 1,2,3-benzotriazines increased the antiproliferative effects. 4-(3-Chloro-4- fluoroanilino)-7-(3-chloropropoxy)-6-methoxy-1,2,3-benzotriazine (8m) was the most effective compound. It was 4-10 fold more potent than PTK787 in inhibiting the growth of T47D breast cancer cells, DU145 and PC-3 prostate cancer cells, LL/2 murine Lewis lung cancer cells and B16F0 melanoma cells.

The synthesis of 18beta-glycyrrhetinic acid derivatives which have increased antiproliferative and apoptotic effects in leukemia cells.

18beta-Glycyrrhetinic acid (GA), 3beta-hydroxyl-11-oxo-olean-12-ene-29-oic acid, has been found to inhibit growth and to induce apoptosis in cancer cells. Through structural modification, 16 GA derivatives (12 novel compounds) with modified structures at the C(3) and C(29) positions were synthesized. The antiproliferative effects and apoptosis induction abilities of these compounds were determined in human leukemia HL-60 cells. The replacement of the hydroxyl group of GA with a carbonyl group or an oxime group at C(3) position does not influence the antiproliferative effect. However, the antiproliferative and apoptosis induction abilities of the compounds with a replaced alkoxyimino group at position C(3) and a free C(29) carboxyl group are markedly increased.