Characterization of the Composition and Biological Activity of the Venom from Vespa bicolor Fabricius, a Wasp from South China.

We analyzed, for the first time, the major components and biological properties of the venom of Vespa bicolor, a wasp from South China. Using HPLC and SDS-PAGE, combined with LC-MS/MS, MALDI-TOF-MS, and NMR data to analyze V. bicolor venom (VBV), we found that VBV contains three proteins (hyaluronidase A, phospholipase A1 (two isoforms), and antigen 5 protein) with allergenic activity, two unreported proteins (proteins 5 and 6), and two active substances with large quantities (mastoparan-like peptide 12a (Vb-MLP 12a), and 5-hydroxytryptamine (5-HT)). In addition, the antimicrobial activity of VBV was determined, and results showed that it had a significant effect against anaerobic bacteria. The minimum inhibitory concentration and minimum bactericidal concentration for Propionibacterium acnes were 12.5 µg/mL. Unsurprisingly, VBV had strong antioxidant activity because of the abundance of 5-HT. Contrary to other Vespa venom, VBV showed significant anti-inflammatory activity, even at low concentrations (1 µg/mL), and we found that Vb-MLP 12a showed pro-inflammatory activity by promoting the proliferation of RAW 264.7 cells. Cytotoxicity studies showed that VBV had similar antiproliferative effects against all tested tumor cell lines (HepG2, Hela, MCF-7, A549, and SASJ-1), with HepG2 being the most susceptible. Overall, this study on VBV has high clinical importance and promotes the development of Vespa bicolor resources.

Micro-interaction of mucin tear film interface with particles: The inconsistency of pharmacodynamics and precorneal retention of ion-exchange, functionalized, Mt-embedded nano- and microparticles.

Physiological reflexes and anatomical barriers render traditional eye drop delivery inefficient. We previously reported that drug-loaded nanoparticles and microspheres prepared from montmorillonite and Eudragit polymers exhibited good sustained-release and lowered intraocular pressure. Here, we compared the performance of optimized formulations to select the most suitable formulation for glaucoma therapy. We found that the microspheres had much higher encapsulation efficiency and drug loading than nanoparticles. Moreover, cytocompatibility experiments demonstrated that nanoparticles showed more severe cytotoxicity than microspheres, probably due to their smaller particles, enhanced cell uptake, and intracellular solubility. Interestingly, the pre-corneal retention time of nanoparticles reflected a clear advantage over microspheres, while the duration of the pharmacological effect of nanoparticles was not as good as that of microspheres: compared with the nanoparticle depressurization duration of only 8 h, the microspheres continuously depressurized for 12 h. The slower release of the microspheres and its micro-interaction mechanism with the discontinuous mucin layer of the tear film led to the inconsistency between duration of pharmacodynamics and fluorescence ocular retention time. In summary, the lower cytotoxicity and longer pharmacological effect of microspheres indicate their potential advantages for glaucoma applications.

Incorporation of ion exchange functionalized-montmorillonite into solid lipid nanoparticles with low irritation enhances drug bioavailability for glaucoma treatment.

Montmorillonite-loaded solid lipid nanoparticles with good biocompatibility, using Betaxolol hydrochloride as model drug, were prepared by the melt-emulsion sonication and low temperature-solidification methods and drug bioavailability was significantly improved in this paper for the first time to application to the eye. The appropriate physical characteristics were showed, such as the mean particle size, Zeta potential, osmotic pressure, pH values, entrapping efficiency (EE%) and drug content (DC%), all showed well suited for possible ocular application. In vitro release experiment indicated that this novel system could continuously release 57.83% drugs within 12 h owing to the dual drug controlled-release effect that was achieved by ion-exchange feature of montmorillonite and structure of solid lipid nanoparticles. Low irritability and good compatibility of nanoparticles were proved by both CAM-TBS test and cytotoxicity experiment. We first discovered from the results of Rose Bengal experiment that the hydrophilicity of the drug-loaded nanoparticles surface was increased during the loading and releasing of the hydrophilic drug, which could contribute to prolong the ocular surface retention time of drug in the biological interface membrane of tear-film/cornea. The results of in vivo pharmacokinetic and pharmacodynamics studies further confirmed that increased hydrophilicity of nanoparticles surface help to improve the bioavailability of the drug and reduce intraocular pressure during administration. The results suggested this novel drug delivery system could be potentially used as an in situ drug controlled-release system for ophthalmic delivery to enhance the bioavailability and efficacy.

Preparation and application of subdivided tablets using 3D printing for precise hospital dispensing.

This study aimed to use three-dimensional printing technology to provide patients with accurate, safe and convenient subdivided drugs and bring the transformation of subdivided drugs' fabrication in the hospital. The formulation, preparation process, model and printing parameters, relationship between dose and preset model for printing of spironolactone of 2 mg, 4 mg and hydrochlorothiazide of 5 mg subdivided tablets prepared by three-dimensional printers were investigated in the study. The three-dimensional printed material consists of commercial tablets powders and other excipients, including lactose, corn starch, microcrystalline cellulose, and so on. Mass variation, drug content and drug content uniformity of subdivided tablets obtained by three-dimensional printing were compared with the pharmacists splitting subdivided tablets. Besides, the results from fourier transform infrared spectroscopy, differential scanning calorimetry and X-ray powder diffraction confirmed that the preparation process of spironolactone of 2 mg, 4 mg and hydrochlorothiazide of 5 mg did not change the crystal structure of the active pharmaceutical ingredient. Furthermore, mass variation, drug content range and drug content uniformity of spironolactone of 2 mg, 4 mg and hydrochlorothiazide of 5 mg tablets split by pharmacists failed to comply with European Pharmacopoeia and Chinese Pharmacopoeia, while those of the three-dimensional printed subdivided tablets did. After the review of the ethics committee as a new technology for hospital dispensing, three-dimensional printed spironolactone subdivided tablets of 2 mg have been used in clinical inpatients and was accepted by pharmacists, nurses and patients. Compared with tablets subdivided split by pharmacists, three-dimensional printed spironolactone tablets of 2 mg were more accurate, safer and more customized, which indicated considerable potential in using three-dimensional printing technology as a new method for hospital dispensing.

Semi-solid extrusion 3D printing ODFs: an individual drug delivery system for small scale pharmacy.

Orodispersible films (ODFs) are promising drug delivery systems for customized medicines as it provide an alternative approach to increase consumer acceptance by advantages of rapid dissolution and administration without water. The aim of this study was to develop a platform to support the realization of tailored treatments suitable for the extemporaneous production of ODFs by semi-solid extrusion (SSE) 3D printing (3DP). Hydroxypropyl methyl cellulose (HPMC) was used as the polymer of ODFs, and levocetirizine hydrochloride was used as the model drug. The optimal formulation was HPMC:API:PS:maltitol:sucralose at a ratio of 64:10:10:15:1. Seventeen percent HPMC solution and optimal formulation were used to prepare film precursors. The impact of dynamic viscosities and fluid mechanics difference on printing applicability was discussed. The ODFs of cube designs with aimed dose of 1.25 mg, 2.5 mg, and 5 mg were printed by SSE 3DP. Good linear relationship between theoretical model volume and drug content (R2 = 0.999) and good dose accuracy indicate that 3DP is a suitable method for preparing individualized ODFs.

Lymphatic clearance is the main drainage route of lamotrigine-loaded micelles following delivery to the brain.

OBJECTIVES: This study aimed to investigate the clearance pathways of lamotrigine (LTG)-loaded micelles by intranasal administration and intracerebral injection in the brain and whether nanoparticles can induce the inflammation promoted by interleukin-6 (IL-6), accelerating the phagocytosis of drug particles in the brain and drainage through lymphatics. METHODS: The drug concentrations in the deep cervical lymph node, superficial cervical lymph node, brain tissues and jugular vein, the pharmacokinetic parameters, and the concentrations of IL-6 in deep cervical lymph node and brain tissues were investigated following UPLC/MS, DAS3.0, ELISA statistically analysed. KEY FINDINGS: The AUC0- t of deep cervical lymph node after intranasal and intracerebral injection was 1.93, 2.77, 1.34 times and 3.06, 16.4, 3.34 times higher compared with the superficial cervical lymph node, jugular vein and brain tissue, respectively. After intranasal administration of lamotrigine-loaded micelles for 30 min, the IL-6 concentrations in deep cervical lymph node and brain tissue were significantly increased (P < 0.05). CONCLUSIONS: These results suggested that lamotrigine micelles were primarily cleared from the brain by lymphatics rather than blood clearance. Also, the nanoparticle induced the increase in IL-6 level after entering the brain suggested that nanoparticles might induce the inflammation promoted by IL-6 in the brain, accelerating the clearance of drug particles in the brain and drainage through lymphatics.

Synthesis and characterization of amphiphilic star-shaped copolymers based on ß-cyclodextrin for micelles drug delivery.

PURPOSE: A series of ß-CD amphiphilic star-shaped copolymers with exceptional characteristics were synthesized and their potential as carriers for micelles drug delivery was investigated. METHODS: A series of amphiphilic copolymers based on ß-CD were synthesized by introducing poly (acrylic acid)-co-poly(methyl methacrylate)-poly (vinyl pyrrolidone) or poly (acrylic acid)-co-poly(methyl methacrylate)-co-poly(monoacylated-ß-CD)-poly (vinyl pyrrolidone) blocks to the primary hydroxyl group positions of ß-CD. The micellization behavior of the copolymers, the synthesis conditions, characteristics, drug release in vitro and tissue distribution of vinpocetine (VP) micelles in vivo were investigated. RESULTS: Around 60 types of ß-CD amphiphilic star-shaped copolymers were successfully synthesized and the critical micelle concentration ranged from 9.80 × 10-4 to 5.24 × 10-2g/L. The particle size, drug loading and entrapment efficiency of VP-loaded ß-CD-P4 micelles prepared with optimal formulation were about 65 nm, 21.44 ± 0.14%, and 49.05 ± 0.36%, respectively. The particles had good sphericity. The cumulative release rates at 72 h of VP-loaded ß-CD-P4 micelles in pH 1.0, pH 4.5, pH 6.5, or pH 7.4 media were 93%, 69%, 49%, and 43%, respectively. And, the lung targeting efficiency of VP-loaded ß-CD-P4 micelles was 8.98 times higher than that of VP injection. CONCLUSION: The VP-loaded ß-CD-P4 micelles exhibited controlled-release property, pH-induced feature and lung targeting capacity compared with VP injection, suggesting that the ß-CD-P4 copolymers are an excellent candidate for micelles drug delivery.

Applications of excipients in the field of 3D printed pharmaceuticals.

The aim of this study was to determine the effect of varying excipient content on the formation and physical properties of 3 D printed tablets. Fifteen different excipient preparations were formed into tablets with radii of 5 mm and thickness of 2 mm, using binder jetting (BJ). The tablets were analyzed by assessing visual and microstructural appearance, friability, hardness, and disintegration time. We found that filling agents with high water solubility (e.g. D-sucrose), binding agents with a high viscosity in solution (e.g. polyethylene glycol 4000) and moistening agent with higher water content can increase the bonding strength and hardness of the 3 D printed tablets and prolonged their disintegration time. This work has demonstrated that the type of excipient and its concentration affects the properties of the 3 D printed tablet. This article may be used as a guide for elucidation of the effects of using conventional tablet excipients in the field of 3 D printed pharmaceuticals. The present work should enable the identification of excipients that satisfy requirements, reduce analysis time, and improve efficiency.

Oral disintegrating patient-tailored tablets of warfarin sodium produced by 3D printing.

Individualized medicine is a new direction in the field of modern pharmacy. In this study, we assessed the feasibility and accuracy of 3D printing techniques for the preparation of individualized doses of mouth-disintegrating tablets of warfarin. Warfarin sodium, D-sucrose, pregelatinized starch, povidone K30, microcrystalline cellulose, and silicon dioxide (at a ratio of 1:42.45:46.15:5.1:4.9:0.4) were mixed and used as the printing powder in the 3D printer; preset parameters were used. The dosage of the tablet was controlled by the number of printing layers. The content, dose uniformity, dose accuracy, hardness, friability, disintegration time, dissolution, and the microstructural and overall appearance were determined to evaluate the printed tablets. For the doses of 3, 2, and 1 mg that were produced in the experiment, the disintegration times were 50.0 ± 5.2, 35.7 ± 4.3, and 11.0 ± 2.2 s, respectively, and the relative errors of the dose were -2.33, -1.50, and 0%, respectively. The other indicators were consistent with the preparation requirements of pharmaceutical tablets. It is possible to prepare tablets with excellent properties and controlled drug doses by using 3D printing techniques. This technology will be an important means to achieve individualized medicine.

Controlled drug delivery for glaucoma therapy using montmorillonite/Eudragit microspheres as an ion-exchange carrier.

BACKGROUND: Glaucoma is a serious eye disease that can lead to loss of vision. Unfortunately, effective treatments are limited by poor bioavailability of antiglaucoma medicine due to short residence time on the preocular surface. MATERIALS AND METHODS: To solve this, we successfully prepared novel controlled-release ion-exchange microparticles to deliver betaxolol hydrochloride (BH). Montmorillonite/BH complex (Mt-BH) was prepared by acidification-intercalation, and this complex was encapsulated in microspheres (Mt-BH encapsulated microspheres [BMEMs]) by oil-in-oil emulsion-solvent evaporation method. The BH loaded into ion-exchange Mt was 47.45%±0.54%. After the encapsulation of Mt-BH into Eudragit microspheres, the encapsulation efficiency of BH into Eudragit microspheres was 94.35%±1.01% and BH loaded into Eudragit microspheres was 14.31%±0.47%. RESULTS: Both Fourier transform infrared spectra and X-ray diffraction patterns indicated that BH was successfully intercalated into acid-Mt to form Mt-BH and then Mt-BH was encapsulated into Eudragit microspheres to obtain BMEMs. Interestingly, in vitro release duration of the prepared BMEMs was extended to 12 hours, which is longer than both of the BH solution (2.5 hours) and the conventional BH microspheres (5 hours). Moreover, BMEM exhibited lower toxicity than that of BH solution as shown by the results of cytotoxicity tests, chorioallantoic membrane-trypan blue staining, and Draize rabbit eye test. In addition, both in vivo and in vitro preocular retention capacity study of BMEMs showed a prolonged retention time. The pharmacodynamics showed that BMEMs could extend the drug duration of action. CONCLUSION: The developed BMEMs have the potential to be further applied as ocular drug delivery systems for the treatment of glaucoma.

UPLC/Q-TOF-MS profiling of phenolics from Canarium pimela leaves and its vasorelaxant and antioxidant activities

ABSTRACT Canarium pimela K.D. Koenig, Burseraceae, have a long history of use in the Chinese traditional medicine treatment of various ailments including hypertension, and our research team has reported the anti-hypertensive activity and delineated the mechanism involved in the action. The following research aims to evaluate the vasorelaxant and antioxidant activities of ethanol extract from C. pimela leaves and to analyze its chemical composition by ultra-performance liquid chromatography-quadrupole time-of-flight mass spectrometry (UPLC/Q-TOF-MS) that may correlate with their pharmacological activities. The results showed that pre-incubation of aortic rings with the extract (0.3, 1, 3, 10, 30 and 100 mg/l) significantly inhibited the contractile response of the rings to norepinephrine-induced contraction (p < 0.01or p < 0.05). Crude ethanol extract and refined ethanol extract showed a highest inhibitory effect against 2,2dipheyl-2-picrylhydrazyl hydrate scavenging activity (IC50 of crude ethanol extract = 15.42 ± 0.14 µg/ml and IC50 of refined ethanol extract = 5.72 ± 0.31 µg/ml) and 2,2′-azinobis (3-ethyl-benzothiazoline-6-sulphonic acid ammonium salt) (ABTS (IC50 of crude ethanol extract = 3.24 ± 0.18 µg/ml and IC50 of refined ethanol extract = 1.88 ± 0.07 µg/ml) scavenging activity, which was considerably higher than that reported for butylated hydroxytoluene and lower of that measured for ascorbic acid. Moreover, its chemical composition was analyzed by UPLC/Q-TOF-MS. Sixteen compounds including nine flavonoids, four tannins, two phenolic acids and one dianthrone were identified for the first time as constituents of this species. And of this, six major phenolic components were simultaneous quantitative analysis by HPLC-UV, chlorogenic acid is the major compounds in C. pimela leaves. These results indicate that the phenolic-rich extract of C. pimela leaves is a promising natural pharmaceutical for combating hypertension and oxidative stress.

Novel histone deacetylase inhibitor N25 exerts anti-tumor effects and induces autophagy in human glioma cells by inhibiting HDAC3.

N25, a novel histone deacetylase inhibitor, was created through structural modification of suberoylanilide hydroxamic acid. To evaluate the anti-tumor activity of N25 and clarify its molecular mechanism of inducing autophagy in glioma cells, we investigated its in vitro anti-proliferative effect and in vivo anticancer effect. Moreover, we detected whether N25 induces autophagy in glioma cells by transmission electron microscope and analyzed the protein expression level of HDAC3, Tip60, LC3 in glioma samples by western blot. We additionally analyzed the protein expression level of HDAC3, Tip60, ULK1 (Atg1), and Beclin-1 (Atg6) after treatment with N25 in glioma cells. Our results showed that the anti-tumor activity of N25 in glioma cells is slightly stronger than SAHA both in vitro and in vivo. We found that N25 induced autophagy, and HDAC3 was significantly elevated and Tip60 and LC3 significantly decreased in glioma samples compared with normal brain tissues. Nevertheless, N25 inhibited HDAC3 and up-regulated the protein expression of Tip60, ULK1 (Atg1), and Beclin-1 (Atg6) after treatment of glioma cells with N25. In conclusion, these data suggest that N25 has striking anti-tumor activity in part due to inhibition of HDAC3. Additionally, N25 may induce autophagy through inhibiting HDAC3.

The efficacy of nimodipine drug delivery using mPEG-PLA micelles and mPEG-PLA/TPGS mixed micelles.

OBJECTIVE: In order to develop and compare mPEG-PLA micelles and mPEG-PLA/TPGS mixed micelles, with the intention to develop a highly efficient formulation for nimodipine (NIM), NIM-loaded micelles and mixed micelles were made and their pharmacokinetics were studied. METHODS: Single factor experiments and orthogonal experiments were designed to optimize the final preparation process, characterizations and drug release behaviors were studied. Pharmacokinetics of NIM micelles, NIM mixed micelles were researched and were compared to NIM solution. RESULTS: Micelles and mixed micelles were prepared by solvent evaporation method, with relatively high drug loading efficiency and within nano-particle size range. The CMC value of mPEG-PLA was lower than that of mPEG-PLA/TPGS. The results of FTIR and TEM confirmed the spherical core-shell structure of micelles as well as mixed micelles, and the encapsulation of NIM inside the cores. In vitro release showed that micelles and mixed micelles had sustained release effect in the forms of passive diffusion and dissolution process, respectively. Following intraperitoneal administration (5mg/kg), micelles and mixed micelles were absorbed faster than solution, and with larger MRT(0-t), smaller CLz and larger AUC(0-t) as compared to that of solution, which showed micelles and mixed micelles had higher retention, slower elimination and higher bioavailability. This experiment also showed that mixed micelles released NIM more stably than micelles. By evaluate the bioequivalence, NIM micelles and NIM mixed micelles were testified non-bioequivalent to NIM solution. CONCLUSION: Micelles and mixed micelles could sustain the NIM concentrations more efficiently in plasma as compared to solution. Mixed micelles were the best ones since they had high loading content and released more stably. Thus, apprehending micelles and mixed micelles were suited as poor aqueous solubility drug carriers, and mixed micelles were better due to their high loading content and more stable release.

[Study on formulation of naoxuekang dispersible tablets].

OBJECTIVE: To study the formulation of Naoxuekang dispersible tablets. METHODS: The formulation was determined by pre-processing leech extractum prior to a series of experiments used to screen excipients like bulking agents and disintegrants and so on, and by adding disintegrants within and without. RESULTS: Microcrystalline cellulose was determined as the bulking agent, and carboxymethyl cellulose and low-substituted hydroxypropyl cellulose were determined as the disintegrants of Naoxuekang dispersible tablet formula. The average disintegration time and nitrogen content of one tablet were 52 seconds and 5.47 milligrams, respectively. Also disperse homogeneity, weight variation and microbial limit all met the requirements in Ch. P. CONCLUSION: The prepared Naoxuekang dispersible tablet is reasonable in formula, feasible in technology, which meets the quality standards.