Pickering Emulsions of Thermotropic Liquid Crystals Stabilized by Amphiphilic Gold Nanoparticles.

We report emulsions of thermotropic liquid crystals (LCs) in water that are stabilized using amphiphilic gold nanoparticles (AuNPs) and retain their ability to respond to aqueous analytes for extended periods (e.g., up to 1 year after preparation). These LC emulsions exhibit exceptional colloidal stability that results from the adsorption of AuNPs that are functionalized with thiol-terminated poly(ethylene glycol) (PEG-thiol) and hexadecanethiol (C16-thiol) to LC droplet interfaces. These stabilized LC emulsions respond to the presence of model anionic (SDS), cationic (C12TAB), and nonionic (C12E4) surfactants in the surrounding aqueous media, as evidenced by ordering transitions in the LC droplets that can be readily observed using polarized light microscopy. Our results reveal significant differences in the sensitivity of the stabilized LC droplets toward each of these analytes. In particular, these stabilized droplets can detect the cationic C12TAB at concentrations that are lower than those required for bare LC droplets under similar experimental conditions (0.5 and 2 mM, respectively). These results demonstrate an enhanced sensitivity of the LC toward C12TAB when the PEG/C16-thiol-coated AuNPs are adsorbed at LC droplet interfaces. In contrast, the concentrations of SDS required to observe optical transformations in the stabilized LC droplets are higher than those required for the bare LC droplets, suggesting that the presence of the PEG/C16-thiol AuNPs reduces the sensitivity of the LC toward this analyte. When combined, our results show that this Pickering stabilization approach using amphiphilic AuNPs as stabilizing agents for LC-in-water emulsions provides a promising platform for developing LC droplet-based optical sensors with long-term colloidal stability as well as opportunities to tune the sensitivity and selectivity of the response to target aqueous analytes.

Establishing Quantifiable Guidelines for Antimicrobial α/ß-Peptide Design: A Partial Least-Squares Approach to Improve Antimicrobial Activity and Reduce Mammalian Cell Toxicity.

Antimicrobial peptides (AMPs) are promising candidates to combat pathogens that are resistant to conventional antimicrobial drugs because they operate through mechanisms that involve membrane disruption. However, the use of AMPs in clinical settings has been limited, at least in part, by their susceptibility to proteolytic degradation and their lack of selectivity toward pathogenic microbes vs mammalian cells. We recently reported on the design of α- and ß-peptide oligomers structurally templated upon the naturally occurring α-helical AMP aurein 1.2. These α/ß-peptide oligomers are more proteolytically stable than aurein 1.2 and have several other attributes that render them attractive as alternatives to conventional AMPs. This study describes the influence of peptide physicochemical properties on the broad-spectrum activity of aurein 1.2-based α/ß-peptide mimics against nine bacterial, fungal, and mammalian cell lines. We used a partial least-squares regression (PLSR)-supervised machine learning model to quantify and visualize relationships between experimentally determined physicochemical properties (e.g., hydrophobicity, charge, and helicity) and experimentally measured cell-type-specific activities of 21 peptides in a 149-member α/ß-peptide library. Using this approach, we identified several peptides that were predicted to exhibit enhanced broad-spectrum selectivity, a measure that evaluates antimicrobial activity relative to mammalian cell toxicity compared to aurein 1.2. Experimental validation demonstrated high model predictive performance, and characterization of compounds with the highest broad-spectrum selectivity revealed peptide hydrophobicity, helicity, and helical rigidity to be strong predictors of broad-spectrum selectivity. The most selective peptide identified from the model prediction has more than a 13-fold improvement in broad-spectrum selectivity than that of aurein 1.2, demonstrating the ability of using PLSR models to identify quantitative structure-function relationships for nonstandard amino acid-containing peptides. Overall, this work establishes quantifiable guidelines for the rational design of helical antimicrobial α/ß-peptides and identifies promising new α/ß-peptides with significantly reduced mammalian toxicities and improved antifungal and antibacterial activities relative to aurein 1.2.

Decoding Optical Responses of Contact-Printed Arrays of Thermotropic Liquid Crystals Using Machine Learning: Detection and Reporting of Aqueous Amphiphiles with Enhanced Sensitivity and Selectivity.

Surfactants and other amphiphilic molecules are used extensively in household products, industrial processes, and biological applications and are also common environmental contaminants; as such, methods that can detect, sense, or quantify them are of great practical relevance. Aqueous emulsions of thermotropic liquid crystals (LCs) can exhibit distinctive optical responses in the presence of surfactants and have thus emerged as sensitive, rapid, and inexpensive sensors or reporters of environmental amphiphiles. However, many existing LC-in-water emulsions require the use of complicated or expensive instrumentation for quantitative characterization owing to variations in optical responses among individual LC droplets. In many cases, the responses of LC droplets are also analyzed by human inspection, which can miss subtle color or topological changes encoded in LC birefringence patterns. Here, we report an LC-based surfactant sensing platform that takes a step toward addressing several of these issues and can reliably predict concentrations and types of surfactants in aqueous solutions. Our approach uses surface-immobilized, microcontact-printed arrays of micrometer-scale droplets of thermotropic LCs and hierarchical convolutional neural networks (CNNs) to automatically extract and decode rich information about topological defects and color patterns available in optical micrographs of LC droplets to classify and quantify adsorbed surfactants. In addition, we report computational capabilities to determine relevant optical features extracted by the CNN from LC micrographs, which can provide insights into surfactant adsorption phenomena at LC-water interfaces. Overall, the combination of microcontact-printed LC arrays and machine learning provides a convenient and robust platform that could prove useful for developing high-throughput sensors for on-site testing of environmentally or biologically relevant amphiphiles.

Interactions of Bacterial Quorum Sensing Signals with Model Lipid Membranes: Influence of Membrane Composition on Membrane Remodeling.

We report the influence of membrane composition on the multiscale remodeling of multicomponent lipid bilayers initiated by contact with the amphiphilic bacterial quorum sensing signal N-(3-oxo)-dodecanoyl-l-homoserine lactone (3-oxo-C12-AHL) and its anionic headgroup hydrolysis product, 3-oxo-C12-HS. We used fluorescence microscopy and quartz crystal microbalance with dissipation (QCM-D) to characterize membrane reformation that occurs when these amphiphiles are placed in contact with supported lipid bilayers (SLBs) composed of (i) 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) containing varying amounts of cholesterol or (ii) mixtures of DOPC and either 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine (DOPE, a conical zwitterionic lipid) or 1,2-dioleoyl-sn-glycero-3-phospho-l-serine (DOPS, a model anionic lipid). In general, we observe these mixed-lipid membranes to undergo remodeling events, including the formation and subsequent collapse of long tubules and the formation of hemispherical caps, upon introduction to biologically relevant concentrations of 3-oxo-C12-AHL and 3-oxo-C12-HS in ways that differ substantially from those observed in single-component DOPC membranes. These differences in bilayer reformation and their associated dynamics can be understood in terms of the influence of membrane composition on the time scales of molecular flip-flop, lipid packing defects, and lipid phase segregation in these materials. The lipid components investigated here are representative of classes of lipids that comprise both naturally occurring cell membranes and many useful synthetic soft materials. These studies thus represent a first step toward understanding the ways in which membrane composition can impact interactions with this important class of bacterial signaling molecules.

Controlling the toxicity of biomass-derived difunctional molecules as potential pharmaceutical ingredients for specific activity toward microorganisms and mammalian cells.

A biomass-derived difuran compound, denoted as HAH (HMF-Acetone-HMF), synthesized by aldol-condensation of 5-hydroxyfurfural (HMF) and acetone, can be partially hydrogenated to provide an electron-rich difuran compound (PHAH) for Diels-Alder reactions with maleimide derivatives. The nitrogen (N) site in the maleimide can be substituted by imidation with amine-containing compounds to control the hydrophobicity of the maleimide moiety in adducts of furans and maleimide by Diels-Alder reaction, denoted as norcantharimides (Diels-Alder adducts). The structural effects on the toxicity of various biomass-derived small molecules synthesized in this manner to regulate biological processes, defined as low molecular weight (≤ 1000 g/mol) organic compounds, were investigated against diverse microbial and mammalian cell types. The biological toxicity increased when hydrophobic N-substitutions and C=C bonds were introduced into the molecular structure. Among the synthesized norcantharamide derivatives, some compounds demonstrated pH-dependent toxicities against specific cell types. Reaction kinetics analyses of the norcantharimides in biological conditions suggest that this pH-dependent toxicity of norcantharimides could arise from retro Diels-Alder reactions in the presence of a Brϕnsted acid that catalyzes the release of an N-substituted maleimide, which has higher toxicity against fungal cells than the toxicity of the Diels-Alder adduct. These synthetic approaches can be used to design biologically-active small molecules that exhibit selective toxicity against various cell types (e.g., fungal, cancer cells) and provide a sustainable platform for production of prodrugs that could actively or passively affect the viability of infectious cells.

Stimuli-Responsive Polymer Coatings for the Rapid and Tunable Contact Transfer of Plasmid DNA to Soft Surfaces.

We report the design and characterization of thin polymer-based coatings that promote the contact transfer of DNA to soft surfaces under mild and physiologically relevant conditions. Past studies reveal polymer multilayers fabricated using linear poly(ethylene imine) (LPEI), poly(acrylic acid) (PAA), and plasmid DNA promote contact transfer of DNA to vascular tissue. Here, we demonstrate that changes in the structure of the polyamine building blocks of these materials can have substantial impacts on rates and extents of contact transfer. We used two hydrogel-based substrate models that permit identification and manipulation of parameters that influence contact transfer. We used a planar gel model to characterize films having the structure (cationic polymer/PAA/cationic polymer/plasmid DNA)x fabricated using either LPEI or one of three poly(ß-amino ester)s as polyamine building blocks. The structure of the polyamine influenced subsequent contact transfer of DNA significantly; in general, films fabricated using more hydrophilic polymers promoted transfer more effectively. This planar model also permitted characterization of the stabilities of films transferred onto secondary surfaces, revealing rates of DNA release to be slower than rates of release prior to transfer. We also used a three-dimensional hole-based hydrogel model to evaluate contact transfer of DNA from the surfaces of inflatable catheter balloons used in vascular interventions and selected a rapid-transfer coating for proof-of-concept studies to characterize balloon-mediated contact transfer of DNA to peripheral arterial tissue in swine. Our results reveal robust and largely circumferential transfer of DNA to the luminal walls of peripheral arteries using inflation times as short as 15 to 30 s. The materials and approaches reported here provide new and useful tools for promoting rapid, substrate-mediated contact transfer of plasmid DNA to soft surfaces in vitro and in vivo that could prove useful in a range of fundamental and applied contexts.

pH-Responsive Polyelectrolyte Coatings that Enable Catheter-Mediated Transfer of DNA to the Arterial Wall in Short and Clinically Relevant Inflation Times.

We report the design and characterization of pH-responsive polymer coatings that enable catheter balloon-mediated transfer of DNA to arterial tissue in short, clinically relevant inflation times. Our approach exploits the pH-dependent ionization of poly(acrylic acid) (PAA) to promote disassembly and release of plasmid DNA from polyelectrolyte multilayers. We characterized the contact transfer of multilayers composed of PAA, plasmid DNA, and linear poly(ethyleneimine) (LPEI) identified as promising in prior studies on the delivery of DNA to arterial tissue. In contrast to thinner films evaluated previously, we found thicker coatings composed of 32 repeating (LPEI/PAA/LPEI/DNA)x tetralayers to swell substantially in physiologically relevant media (in PBS; pH = 7.4). In some cases, these coatings also disintegrated or delaminated rapidly from their underlying substrates, suggesting the potential for enhanced balloon-mediated transfer. We developed a technically straightforward agarose gel-based hole-insertion model to characterize factors (inflation time, lumen size, etc.) that influence contact transfer of DNA when film-coated balloons are inflated into contact with soft surfaces. Those studies and the results of in vivo experiments using small animal (rat) and large animal (pig) models of peripheral arterial injury revealed catheters coated with these materials to promote robust contact transfer of DNA to soft hydrogel surfaces and the luminal surfaces of arterial tissue using inflation times as short as 30 s. These short inflation times are relevant in the context of clinical vascular interventions in peripheral arteries. Additional studies demonstrated that contact transfer of DNA using these short times can promote subsequent dissemination and transport of DNA to the medial tissue layer, suggesting the potential for use in therapeutically relevant applications of balloon-mediated gene transfer.

Slippery Antifouling Polymer Coatings Fabricated Entirely from Biodegradable and Biocompatible Components.

We report the design of slippery liquid-infused porous surfaces (SLIPS) fabricated from building blocks that are biodegradable, edible, or generally regarded to be biocompatible. Our approach involves infusion of lubricating oils, including food oils, into nanofiber-based mats fabricated by electrospinning or blow spinning of poly(ε-caprolactone), a hydrophobic biodegradable polymer used widely in medical implants and drug delivery devices. This approach leads to durable and biodegradable SLIPS that prevent fouling by liquids and other materials, including microbial pathogens, on objects of arbitrary shape, size, and topography. This degradable polymer approach also provides practical means to design "controlled-release" SLIPS that release molecular cargo at rates that can be manipulated by the properties of the infused oils (e.g., viscosity or chemical structure). Together, our results provide new designs and introduce useful properties and behaviors to antifouling SLIPS, address important issues related to biocompatibility and environmental persistence, and thus advance new potential applications, including the use of slippery materials for food packaging, industrial and marine coatings, and biomedical implants.

Antibody-Targeted Liposomes for Enhanced Targeting of the Blood-Brain Barrier.

The blood-brain barrier (BBB) hinders therapeutic delivery to the central nervous system (CNS), thereby impeding the development of therapies for brain injury and disease. Receptor-mediated transcytosis (RMT) systems are a promising way to shuttle a targeted therapeutic into the brain. Here, we developed and evaluated an RMT antibody-targeted liposomal system. A previously identified antibody, scFv46.1, that binds to the human and murine BBB and can pass through the murine BBB by transcytosis after intravenous injection was used to decorate the surface of liposomes. Using an in vitro BBB model, we demonstrated the cellular uptake of scFv46.1-modified liposomes (46.1-Lipo). Next, the biodistribution and brain uptake capacity of 46.1-targeted liposomes were assessed after intravenous administration. Our results showed that 46.1-Lipo can lead to increased brain accumulation through targeting of the brain vasculature. Initial rate pharmacokinetic experiments and biodistribution analyses indicated that 46.1-Lipo loaded with pralidoxime exhibited a 10-fold increase in brain accumulation compared with a mock-targeted liposomal group, and this increased accumulation was brain-specific. These studies indicate the potential of this 46.1-Lipo system as a synthetic vehicle for the targeted transport of therapeutic molecules into the CNS.

Environmentally Responsive Emulsions of Thermotropic Liquid Crystals with Exceptional Long-Term Stability and Enhanced Sensitivity to Aqueous Amphiphiles.

We report colloidally stable emulsions of thermotropic liquid crystals (LCs) that can detect the presence of amphiphilic analytes in aqueous environments. Our approach makes use of a Pickering stabilization strategy consisting of surfactant-nanoparticle complexes (SiO2/CnTAB, n = 8, 12, 16) that adsorb to aqueous/LC droplet interfaces. This strategy can stabilize LC emulsions against coalescence for at least 3 months. These stabilized LC emulsions also retain the ability to respond to the presence of model anionic, cationic, and nonionic amphiphiles (e.g., SDS, C12TAB, C12E4) in aqueous solutions by undergoing "bipolar-to-radial" changes in LC droplet configurations that can be readily observed and quantified using polarized light microscopy. Our results reveal these ordering transitions to depend upon the length of the hydrocarbon tail of the CnTAB surfactant used to form the stabilizing complexes. In general, increasing CnTAB surfactant tail length leads to droplets that respond at lower analyte concentrations, demonstrating that this Pickering stabilization strategy can be used to tune the sensitivities of the stabilized LC droplets. Finally, we demonstrate that these colloidally stable LC droplets can report the presence of rhamnolipid, a biosurfactant produced by the bacterial pathogen Pseudomonas aeruginosa. Overall, our results demonstrate that this Pickering stabilization strategy provides a useful tool for the design of LC droplet-based sensors with substantially improved colloidal stability and new strategies to tune their sensitivities. These advances could increase the potential practical utility of these responsive soft materials as platforms for the detection and reporting of chemical and biological analytes.

Identification of small molecules that strongly inhibit bacterial quorum sensing using a high-throughput lipid vesicle lysis assay.

Strategies to both monitor and block bacterial quorum sensing (QS), and thus associated infections, are of significant interest. We developed a straightforward assay to monitor biosurfactants and lytic agents produced by bacteria under the control of QS. The method is based on the lysis of synthetic lipid vesicles containing the environmentally sensitive fluorescent dye calcein. This assay allows for the in situ screening of compounds capable of altering biosurfactant production by bacteria, and thereby the identification of molecules that could potentially modulate QS pathways, and avoids the constraints of many of the cell-based assays in use today. Application of this assay in a high-throughput format revealed five molecules capable of blocking vesicle lysis by S. aureus. Two of these compounds were found to almost completely inhibit agr-based QS in S. aureus and represent the most potent small-molecule-derived QS inhibitors reported in this formidable pathogen.

Slippery nanoemulsion-infused porous surfaces (SNIPS): anti-fouling coatings that can host and sustain the release of water-soluble agents.

We report the design of 'slippery' nanoemulsion-infused porous surfaces (SNIPS). These materials are strongly anti-fouling to a broad range of substances, including microorganisms. Infusion with water-in-oil nanoemulsions also endows these slippery coatings with the ability to host and control or sustain the release of water-soluble agents, including polymers, peptides, and nucleic acids, opening the door to new applications of liquid-infused materials.

Fabrication of Slippery Liquid-Infused Coatings in Flexible Narrow-Bore Tubing.

We report a layer-by-layer suction-and-flow approach that enables the fabrication of polymer-based "slippery" liquid-infused porous surfaces (SLIPS) in the confined luminal spaces of flexible, narrow-bore tubing. These SLIPS-coated tubes can prevent or strongly reduce surface fouling after prolonged contact, storage, or flow of a broad range of complex fluids and viscoelastic materials, including many that are relevant in the contexts of medical devices (e.g., blood and urine), food processing (beverages and fluids), and other commercial and industrial applications. The robust and mechanically compliant nature of the nanoporous coating used to host the lubricating oil phase allows these coated tubes to be bent, flexed, and coiled repeatedly without affecting their inherent slippery and antifouling behaviors. Our results also show that SLIPS-coated tubes can prevent the formation of bacterial biofilms after prolonged and repeated flow-based exposure to the human pathogen Staphylococcus aureus and that the anti-biofouling properties of these coated tubes can be further improved or prolonged by coupling this approach with strategies that permit the sustained release of broad-spectrum antimicrobial agents. The suction-and-flow approach used here enables the application of slippery coatings in the confined luminal spaces of narrow-bore tubing that are difficult to access using several other methods for the fabrication of liquid-infused coatings and can be applied to tubing of arbitrary length and diameter. We anticipate that the materials and approaches reported here will prove useful for reducing or preventing biofouling, process fouling, and the clogging or occlusion of tubing in a wide range of consumer, industrial, and healthcare-oriented applications.

Interactions of Bacterial Quorum Sensing Signals with Model Lipid Membranes: Influence of Acyl Tail Structure on Multiscale Response.

Many common bacteria use amphiphilic N-acyl-L-homoserine lactones (AHLs) as signaling molecules to coordinate group behaviors at high cell densities. Past studies demonstrate that AHLs can adsorb to and promote the remodeling of lipid membranes in ways that could underpin cell-cell or host-cell interactions. Here, we report that changes in AHL acyl tail group length and oxidation state (e.g., the presence or absence of a 3-oxo group) can lead to differences in the interactions of eight naturally occurring AHLs in solution and in contact with model lipid membranes. Our results reveal that the presence of a 3-oxo group impacts remodeling when AHLs are placed in contact with supported lipid bilayers (SLBs) of the phospholipid 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC). Whereas AHLs that have 3-oxo groups generally promote the formation of microtubules, AHLs that lack 3-oxo groups generally form hemispherical caps on the surfaces of SLBs. These results are interpreted in terms of the time scales on which AHLs translocate across bilayers to relieve asymmetrical bilayer stress. Quartz crystal microbalance with dissipation measurements also reveal that 3-oxo AHLs associate with DOPC bilayers to a greater extent than their non-3-oxo analogues. In contrast, we observed no monotonic relationship between AHL tail length and bilayer reformation. Finally, we observed that 3-oxo AHLs facilitate greater transport or leakage of molecular cargo across the membranes of DOPC vesicles relative to AHLs without 3-oxo groups, also suggesting increased bilayer disruption and destabilization. These fundamental studies hint at interactions and associated multiscale phenomena that may inform current interpretations of the behaviors of AHLs in biological contexts. These results could also provide guidance useful for the design of new classes of synthetic materials (e.g., sensor elements or drug delivery vehicles) that interact with or respond selectively to communities of bacteria that use 3-oxo AHLs for cell-cell communication.

Structured Liquid Droplets as Chemical Sensors that Function Inside Living Cells.

We report that micrometer-scale droplets of thermotropic liquid crystals (LCs) can be positioned inside living mammalian cells and deployed as chemical sensors to report the presence of toxins in extracellular environments. Our approach exploits droplets of LC enclosed in semi-permeable polymer capsules that enable internalization by cells. The LC droplets are stable in intracellular environments, but undergo optical changes upon exposure of cells to low, sub-lethal concentrations of toxic amphiphiles. Remarkably, LC droplets in intracellular environments respond to extracellular analytes that do not generate an LC response in the absence of cellular internalization. They also do not respond to other chemical stimuli or processes associated with cell growth or manipulation in culture. Our results suggest that droplet activation involves the transport and co-adsorption of amphiphilic toxins and other lipophilic cell components to the surfaces of internalized droplets. This work provides fundamentally new designs of biotic-abiotic systems that can report sensitively and selectively on the presence of select chemical agents outside cells and provides a foundation for the design of structured liquid droplets that can sense and report on other biochemical or metabolic processes inside cells.

Bacterial Quorum Sensing Signals Promote Large-Scale Remodeling of Lipid Membranes.

We report that N-acyl-l-homoserine lactones (AHLs), a class of nonionic amphiphiles that common bacteria use as signals to coordinate group behaviors, can promote large-scale remodeling in model lipid membranes. Characterization of supported lipid bilayers (SLBs) of the phospholipid 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) by fluorescence microscopy and quartz crystal microbalance with dissipation (QCM-D) reveals the well-studied AHL signal 3-oxo-C12-AHL and its anionic head group hydrolysis product (3-oxo-C12-HS) to promote the formation of long microtubules that can retract into hemispherical caps on the surface of the bilayer. These transformations are dynamic, reversible, and dependent upon the head group structure. Additional experiments demonstrate that 3-oxo-C12-AHL can promote remodeling to form microtubules in lipid vesicles and promote molecular transport across bilayers. Molecular dynamics (MD) simulations predict differences in thermodynamic barriers to translocation of these amphiphiles across a bilayer that are reflected in both the type and extent of reformation and associated dynamics. Our experimental observations can thus be interpreted in terms of accumulation and relief of asymmetric stresses in the inner and outer leaflets of a bilayer upon intercalation and translocation of these amphiphiles. Finally, experiments on Pseudomonas aeruginosa, a pathogen that uses 3-oxo-C12-AHL for cell-to-cell signaling, demonstrate that 3-oxo-C12-AHL and 3-oxo-C12-HS can promote membrane remodeling at biologically relevant concentrations and in the absence of other biosurfactants, such as rhamnolipids, that are produced at high population densities. Overall, these results have implications for the roles that 3-oxo-C12-AHL and its hydrolysis product may play in not only mediating intraspecies bacterial communication but also processes such as interspecies signaling and bacterial control of host-cell response. Our findings also provide guidance that could prove useful for the design of synthetic self-assembled materials that respond to bacteria in ways that are useful in the context of sensing, drug delivery, and in other fundamental and applied areas.

Liquid Crystal-Infused Porous Polymer Surfaces: A "Slippery" Soft Material Platform for the Naked-Eye Detection and Discrimination of Amphiphilic Species.

We report the design and characterization of liquid crystal (LC)-infused porous polymer membranes that can detect and report on the presence of natural and synthetic amphiphiles in aqueous solution. We demonstrate that thermotropic LCs can be infused into nanoporous polymer membranes to yield LC-infused surfaces that exhibit slippery behaviors in contact with a range of aqueous fluids. In contrast to conventional liquid-infused surfaces (LIS) or slippery liquid-infused porous surfaces (SLIPS) prepared using isotropic oils, aqueous solutions slide over the surfaces of these LC-infused materials at speeds that depend strongly upon the composition of the fluid, including the presence, concentration, or structure of a dissolved surfactant. In general, the sliding times of aqueous droplets on these LC-infused surfaces increase significantly (e.g., from times on the order of seconds to times on the order of minutes) with increasing amphiphile concentration, allowing sliding times to be used to estimate the concentration of the amphiphile. Additional experiments revealed other intrinsic and extrinsic variables or parameters that can be used to further manipulate droplet sliding times and discriminate among amphiphiles of similar structure. Our results are consistent with a physical picture that involves reversible changes in the interfacial orientation of anisotropic LCs mediated by the interfacial adsorption of amphiphiles. These materials thus permit facile "naked-eye" detection and discrimination of amphiphiles in aqueous samples using equipment no more sophisticated than a stopwatch. We demonstrate the potential utility of these LC-infused surfaces for the unaided, naked-eye detection and monitoring of amphiphilic biotoxins in small droplets of fluid extracted directly from cultures of two common bacterial pathogens (Pseudomonas aeruginosa and Staphylococcus aureus). The ability to translate molecular interactions at aqueous/LC interfaces into large and readily observed changes in the sliding times of small aqueous droplets on surfaces could open the door to new applications for antifouling, liquid-infused materials in the context of environmental sensing and other fundamental and applied areas.

Membrane Remodeling and Stimulation of Aggregation Following α-Synuclein Adsorption to Phosphotidylserine Vesicles.

α-Synuclein is an intrinsically disordered protein abundant in presynaptic terminals in neurons and in synaptic vesicles. α-Synuclein's interaction with lipid bilayers is important not only for its normal physiological function but also in its pathological aggregation and deposition as Lewy bodies in Parkinson's disease. α-Synuclein binds preferentially to lipids with acidic head groups and to high-curvature vesicles and can modulate membrane curvature. The relationship between the protein's role as a membrane curvature sensor and generator and the role of membranes in facilitating its aggregation remains unknown. We investigated the interaction of α-synuclein with vesicles of 1,2-dioleoyl-sn-glycero-3-phospho-l-serine (DOPS) or 1,2-dilauroyl-sn-glycero-3-phospho-l-serine (DLPS). Using nanoparticle tracking along with electron microscopy, we demonstrate that α-synuclein induces extensive vesicle disruption and membrane remodeling into discoids, tubules, and ribbons with DLPS vesicles but not DOPS. Coarse-grained molecular dynamics simulations revealed that adsorption of α-synuclein to DLPS but not DOPS vesicles induced vesicle elongation and redistribution of protein to regions of higher curvature, a process that could drive protein aggregation. In agreement with this hypothesis, DLPS but not DOPS strongly stimulated α-synuclein aggregation. Our results provide new insights into the critical contribution of bilayer stability in the membrane response to α-synuclein adsorption and in stimulation of aggregation.

Soft Materials that Intercept, Respond to, and Sequester Bacterial Siderophores.

We report the design and characterization of Fe-containing soft materials that respond to, interface with, and/or sequester Fe-chelating 'siderophores' that bacteria use to scavenge for iron and regulate iron homeostasis. We demonstrate that metal-organic network coatings fabricated by crosslinking tannic acid with iron(III) are stable in bacterial growth media, but erode upon exposure to biologically relevant concentrations of enterobactin and deferoxamine B, two siderophores produced by Gram-negative and Gram-positive bacteria, respectively. Our results are consistent with changes in network stability triggered by the extraction of iron(III) and reveal rates of siderophore-induced disassembly to depend upon both siderophore concentration and affinity for iron(III). These coatings also disassemble when incubated in the presence of cultures of wild-type Escherichia coli. Assays using genetically modified strains of E. coli reveal the erosion of these materials by live cultures to be promoted by secretion of enterobactin and not from other factors resulting from bacterial growth and metabolism. This stimuli-responsive behavior can also be exploited to design coatings that release the Fe-chelating antibiotic ciprofloxacin into bacterial cultures. Finally, we report the discovery of Fe-containing polymer hydrogels that avidly sequester and scavenge enterobactin from surrounding media. The materials reported here are (i) capable of interfacing or interfering with mechanisms that bacteria use to maintain iron homeostasis, either by yielding iron to or by sequestering iron-scavenging agents from bacteria, and can (ii) respond dynamically to or report on the presence of populations of iron-scavenging bacteria. Our results thus provide new tools that could prove useful for microbiological research and enable new stimuli-responsive strategies for interfacing with or controlling the behaviors of communities of iron-scavenging bacteria.