Intraoperative Complications and Mid-Term Follow-Up of Large-Diameter Head Metal-on-Metal Total Hip Arthroplasty and Hip Resurfacing Arthroplasty.

BACKGROUND AND AIMS: Large-diameter head total hip arthroplasty and hip resurfacing arthroplasty were popular in Finland from 2000 to 2012 for the treatment of hip osteoarthritis. The aim of this retrospective study was to investigate the mid-term survival of large-diameter head total hip arthroplasty patients operated on in three university hospitals and to compare these results to the survival of hip resurfacing arthroplasty patients. MATERIAL AND METHODS: A total of 3860 hip arthroplasties (3029 large-diameter head total hip arthroplasties in 2734 patients and 831 hip resurfacing arthroplasties in 757 patients) were operated on between January 2004 and December 2009. The mean follow-up was 4.3 years (range: 0.3-8.0 years) in the total hip arthroplasty group and 5.1 years (range: 1.7-7.9 years) in the hip resurfacing arthroplasty group. Cox multiple regression model and Kaplan-Meier survival analysis were used to study the survival of the total hip arthroplasties and the hip resurfacing arthroplasties. Intraoperative complications and reasons for revisions were also evaluated. RESULTS: In Cox regression analysis, the hazard ratio for revision of hip resurfacing arthroplasty was 1.5 compared with large-diameter head total hip arthroplasty (95% confidence interval: 1.0-2.2) ( p = 0.029). The cumulative Kaplan-Meier survival rate was 90.7% at 7.7 years for the large-diameter head total hip arthroplasty (95% confidence interval: 86.8-94.6) and 92.2% at 7.6 years for hip resurfacing arthroplasty (95% confidence interval: 89.9-94.6). There were a total of 166/3029 (5.5%) intraoperative complications in the large-diameter head total hip arthroplasty group and 20/831 (2.4%) in the hip resurfacing arthroplasty group ( p = 0.001). Revision for any reason was performed on 137/3029 (4.5%) of the arthroplasties in the large-diameter head total hip arthroplasty group and 52/831 (6.3%) in the hip resurfacing arthroplasty group ( p = 0.04). CONCLUSION: The mid-term survival of both of these devices was poor, and revisions due to adverse reactions to metal debris will most likely rise at longer follow-up. There were more intraoperative complications in the large-diameter head total hip arthroplasty group than in the hip resurfacing arthroplasty group.

Management of massive acetabular bone defects in revision arthroplasty of the hip using a reconstruction cage and porous metal augment.

AIMS: It may not be possible to undertake revision total hip arthroplasty (THA) in the presence of massive loss of acetabular bone stock using standard cementless hemispherical acetabular components and metal augments, as satisfactory stability cannot always be achieved. We aimed to study the outcome using a reconstruction cage and a porous metal augment in these patients. PATIENTS AND METHODS: A total of 22 acetabular revisions in 19 patients were performed using a combination of a reconstruction cage and porous metal augments. The augments were used in place of structural allografts. The mean age of the patients at the time of surgery was 70 years (27 to 85) and the mean follow-up was 39 months (27 to 58). The mean number of previous THAs was 1.9 (1 to 3). All patients had segmental defects involving more than 50% of the acetabulum and seven hips had an associated pelvic discontinuity. RESULTS: Three failures were observed in two hips, both of which had undergone a previous resection of a tumour affecting the acetabulum. Other complications included a late arterial injury, a sciatic nerve palsy, a dislocation treated with a femoral revision, a deep infection treated with irrigation and debridement and a fracture of the greater trochanter treated conservatively. The mean Oxford Hip Score significantly increased from 13.9 (2 to 23) to 28.7 (13 to 38) (p < 0.00001). The mean vertical distance between the centre of rotation of the hip and its normal location decreased from 30 mm to 10 mm. CONCLUSIONS: Acceptable early survivorship can be achieved using this novel technique, but it may be unsuitable for use in patients who have previously undergone the resection of a tumour involving the acetabulum. Cite this article: Bone Joint J 2017;99-B:607-13.

The role of cages in the management of severe acetabular bone defects at revision arthroplasty.

An uncemented hemispherical acetabular component is the mainstay of acetabular revision and gives excellent long-term results. Occasionally, the degree of acetabular bone loss means that a hemispherical component will be unstable when sited in the correct anatomical location or there is minimal bleeding host bone left for biological fixation. On these occasions an alternative method of reconstruction has to be used. A major column structural allograft has been shown to restore the deficient bone stock to some degree, but it needs to be off-loaded with a reconstruction cage to prevent collapse of the graft. The use of porous metal augments is a promising method of overcoming some of the problems associated with structural allograft. If the defect is large, the augment needs to be protected by a cage to allow ingrowth to occur. Cup-cage reconstruction is an effective method of treating chronic pelvic discontinuity and large contained or uncontained bone defects. This paper presents the indications, surgical techniques and outcomes of various methods which use acetabular reconstruction cages for revision total hip arthroplasty.

The usefulness of MRI and arthroscopy in the diagnosis and treatment of soft-tissue injuries associated with split-depression fractures of the lateral tibial condyle.

The role of arthroscopy in the treatment of soft-tissue injuries associated with proximal tibial fractures remains debatable. Our hypothesis was that MRI over-diagnoses clinically relevant associated soft-tissue injuries. This prospective study involved 50 consecutive patients who underwent surgical treatment for a split-depression fracture of the lateral tibial condyle (AO/OTA type B3.1). The mean age of patients was 50 years (23 to 86) and 27 (54%) were female. All patients had MRI and arthroscopy. Arthroscopy identified 12 tears of the lateral meniscus, including eight bucket-handle tears that were sutured and four that were resected, as well as six tears of the medial meniscus, of which five were resected. Lateral meniscal injuries were diagnosed on MRI in four of 12 patients, yielding an overall sensitivity of 33% (95% confidence interval (CI) 11 to 65). Specificity was 76% (95% CI 59 to 88), with nine tears diagnosed among 38 menisci that did not contain a tear. MRI identified medial meniscal injuries in four of six patients, yielding an overall sensitivity of 67% (95% CI 24 to 94). Specificity was 66% (95% CI 50 to 79), with 15 tears diagnosed in 44 menisci that did not contain tears. MRI appears to offer only a marginal benefit as the specificity and sensitivity for diagnosing meniscal injuries are poor in patients with a fracture. There were fewer arthroscopically-confirmed associated lesions than reported previously in MRI studies.

Comparison of digital and conventional radiostereometric image analysis in an ankle phantom model.

BACKGROUND AND AIMS: Radiostereometric analysis (RSA) allows accurate three-dimensional measurements of micromotion in skeletal structures. The current RSA techniques are based on the analysis of scanned plain films. This study was undertaken to compare digital filmless RSA technique to conventional scanning technique using a phantom model of the ankle mortise. MATERIAL AND METHODS: In the first experiment, the relative displacement of the markers inserted to the fibula in relation to the markers inserted to the tibia was studied by means of double examinations and the precision of DICOM images were compared to scanned images of printed radiographs. In the second experiment, the film pair of double examination was re-imported or re-scanned and self-compared in order to show merely the error related to the image processing. RESULTS: The precision of RSA using scanned images of printed radiographs was compatible to DICOM images. However, the mean error of rigid body fitting (ME) values were significantly lower in use of DICOM images compared with scanned radiographs, indicating less deformation of rigid body segments in filmless analysis. CONCLUSIONS: Precision of the RSA method was improved under the completely filmless environment. Therefore, this technique can be recommended for clinical studies of radiostereometric analysis.

Efficacy of bioabsorbable antibiotic containing bone screw in the prevention of biomaterial-related infection due to Staphylococcus aureus.

Impregnation of antimicrobial agents within biodegradable orthopedic implants provides a possibility for local antimicrobial prophylaxis of biomaterial-related infections. The objective of this study was to evaluate the efficacy of a bioabsorbable ciprofloxacin containing bone screw (Ab-PLGA) in the prevention of biomaterial-related infection due to Staphylococcus aureus in a rabbit model. Animals in Group I (n=8) received a Ab-PLGA screw contaminated with S. aureus, while animals in Group II (n=8) received a stainless steel (SS) screw contaminated with S. aureus. In two negative control groups, the animals received a Ab-PLGA screw (Group III, n=4) or a SS screw (Group IV, n=4) without bacterial contamination. 18F-FDG-PET imaging, performed at 6 weeks, was applied as a novel quantitative in vivo imaging modality of implant-related infection. Infection was verified by swab cultures, direct cultures of the retrieved implant, and quantitative cultures of pulverized bone. The concentrations of ciprofloxacin in serum and local bone tissue were determined by a high performance liquid chromatographic (HPLC) method with fluorescence (FLD) detection. In the group of contaminated Ab-PLGA screws, all cultures were negative. In the group of contaminated SS screws, all cultures of retrieved implants and six cultures out of eight of pulverized bone were positive for inoculated S. aureus. In negative control groups, all cultures were negative except one contaminant (S. cohnii) found in a SS screw culture. Verified infection of contaminated SS screws was collaborated by the increased 18F-FDG-PET uptake (P=0.004 compared with the group of contaminated Ab-PLGA screws). The mean bone tissue concentration of ciprofloxacin varied from 2.54 to 0.83 microg/g bone as a function of distance from the implantation site. The serum concentration of ciprofloxacin remained undetectable and below the resolution of the analytic method (<5.0 ng/ml). This study confirmed the in vivo efficacy of bioabsorbable antibiotic containing bone screw in the prevention of biomaterial-related infection due to S. aureus.